[1. Paciorek-Sadowska, J. (2011). Studies the effect of boric acid derivatives and N, N-(dihydroxymethyl) urea on the characteristics of rigid polyurethane-polyisocyanurate foams, Kazimierz Wielki University, Bydgoszcz. [in Polish].]Search in Google Scholar
[2. Chmiel-Szukiewicz, E. & Lubczak, J. (2006). Reactions of trithiocyanuric acid with oxiranes. IV. Analysis of the initial stages of the synthesis of polyetherols, J. Appl. Polym. Sci. 100, 4917. DOI: 10.1002/app.23608.10.1002/app.23608]Search in Google Scholar
[3. Paciorek-Sadowska, J., Czupryński, B. & Liszkowska, J. (2011). Application of waste products from agricultural-food industry for production of rigid polyurethane-polyisocyanurate foams. J. Porous Mater. 18, 631. DOI: 10.1007/s10934-010-9419-8.10.1007/s10934-010-9419-8]Search in Google Scholar
[4. Paciorek-Sadowska, J., Czupryński, B. & Liszkowska, J. (2011). Modification of Polymers. Status and prospects for 2011, Mater. Conf. Tempo, Wrocław. 129–134.]Search in Google Scholar
[5. Paciorek-Sadowska, J., Czupryński, B. & Liszkowska, J. (2012). Fire-safe polyurethanes modified with new flame retardant. Chemik 66(4), 297–306.]Search in Google Scholar
[6. Haponiuk, J.T., Strankowski, M. & Lazarewicz, T. (2003). DSC Study of Polyurethanes obtained from 4,4′-Bis(10-Hydroxydecaoxy)biphenyl. J. Therm. Anal. Calor. 74, 609. DOI: 10.1023/B:JTAN.0000005201.12216.dd.10.1023/B:JTAN.0000005201.12216.dd]Search in Google Scholar
[7. Randall, D. & Lee, S. (editors) (2002). The polyurethanes book. Wiley Ltd.]Search in Google Scholar
[8. Datta, J. & Rohn, M. (2007). Glycolysis of PUR waste. Vol. I. Glycolysis agents and catalysts. Polimery 52(7–8), 579. [in Polish].]Search in Google Scholar
[9. Datta, J. & Rohn, M. (2007). Glycolysis of PUR waste. Vol. I. Purification and use of glycolysis. Polimery 52(9), 627. [in Polish].]Search in Google Scholar
[10. Datta, J. & Pasternak, S. (2005). Oligouretanols obtained by glycolysis of polyurethane foam as intermediates for the preparation of cast urethane elastomers. Polimery 50(5), 352. [in Polish].10.14314/polimery.2005.352]Search in Google Scholar
[11. Paciorek-Sadowska, J., Czupryński, B., Liszkowska, J. & Jaskółowski, W. (2010). New organoboron polyol for the production of rigid polyurethane-polyisocyanurate foams. Vol. II. Preparation of rigid polyurethane-polyisocyanurate foams using a new organoboron polyol. Polimery 55(2), 99. [in Polish].]Search in Google Scholar
[12. Paciorek-Sadowska, J., Czupryński, B., Liszkowska, J. & Kotarska, K. (2012). Fire-safe polyurethane matherials modified with new flame retardant – use of new flammability test methods. Inż. Apar. Chem. 51(3), 58. [in Polish].]Search in Google Scholar
[13. Desroches, M., Maxime Escouvois, M., Auvergnea, R., Sylvain Caillola & Bernard Boutevina, C. B. (2012). From Vegetable Oils to Polyurethanes: Synthetic Routes to Polyols and Main Industrial Products. Polym.Rev. 52(1), 38–79. DOI: 10.1080/15583724.2011.640443.10.1080/15583724.2011.640443]Search in Google Scholar
[14. Zhang, J., Tang, J.J. & Zhang, J.X. (2015). Polyols Prepared from Ring-Opening Epoxidized Soybean Oil by a Castor Oil-Based Fatty Diol. Inter. J. Polym. Sci. Article ID 529235, 8 pages, http://dx.doi.org/10.1155/2015/529235 (on line).]Search in Google Scholar
[15. Czub, P. (2006). The use of epoxidized soybean oil to control the viscosity of the epoxy composition. Polimery 51(11–12), 821–828. [in Polish].10.14314/polimery.2006.821]Search in Google Scholar
[16. Prociak, A. (2007). Cell structure and thermal conductivity of rigid polyurethane foams blown with cyclopentane in different moulds. Polyuret. Mag., 4, 218–24.]Search in Google Scholar
[17. Prociak, A. (2008). Heat-insulating properties of rigid polyurethane foams synthesized with use of vegetable oils-based polyols. Polimery 53(3), 195–200.10.14314/polimery.2008.195]Search in Google Scholar
[18. Banik, I. & Sain, M.N. (2008). Water Blown Soy Polyol-Based Polyurethane Foams of Different Rigidities. J. Reinf. Plast. Compos. 27(4), 357–373. DOI: 10.1177/0731684407083955.10.1177/0731684407083955]Search in Google Scholar
[19. Septevani, A.A., Evans, D.A.C., Chaleat, C., Martin, D.J. & Annamalai, P.K. (2015). A systematic study substituting polyether polyol with palm kernel oil based polyester polyol in rigid polyurethane foam. Industrial Crops & Products 66, 16–26. http://dx.doi.org/10.1016/j.indcrop.2014.11.053]Search in Google Scholar
[20. Garrison, T.F., Kessler, M.R. & Larock, R.C. (2014). Effects of unsaturation and different ring-opening methods on the properties of vegetable oil-based polyurethane coatings. Polymer 55(4), 1004–1011. DOI: 10.1016/j.polymer.2014.01.014.10.1016/j.polymer.2014.01.014]Search in Google Scholar
[21. Lee, A. & Deng, Y. (2015). Green polyurethane from lignin and soybean oil through non-isocyanate reactions. European Polym. J., 63, 67–73. DOI: 10.1016/j.eurpolymj.2014.11.023.10.1016/j.eurpolymj.2014.11.023]Search in Google Scholar
[22. Datta, J. & Głowińska, E. (2014). Effect of hydroxylated soybean oil and bio-based propanediol on the structure and thermal properties of synthesized bio-polyurethanes. Industrial Crops & Products 61, 84–91. http://dx.doi.org/10.1016/j.indcrop.2014.06.050.]Search in Google Scholar
[23. Zhang, M., Zhang, J., Chen, S. & Zhou, Y. (2014). Synthesis and fire properties of rigid polyurethane foams made from a polyol derived from melamine and cardanol. Polym. Degrad. Stab., 110, 27–34. http://dx.doi.org/10.1016/j.polymdegradstab.2014.08.009]Search in Google Scholar
[24. Zarzyka, I. (2015). Oligomers with structural elements of imidazolidinetrione obtained from oxamic acid and oxamide: polyurethane foams modified by structural elements of imidazolidinetrione. J. Polym. Engine. 35(1), 1–10. DOI: 10.1515/polyeng-2013-0318.10.1515/polyeng-2013-0318]Search in Google Scholar