Aggregation of Electric Current Consumption Features to Extract Maintenance KPIs

[1] C-A. Johansson, D. Galar, R. Villarejo and M. Monnin, ”Green Condition based Maintenance - an integrated system approach for health assessment and energy optimization of manufacturing machines”, in The 10th Int. Conf. on Condition Monitoring and Machinery Failure Prevention Technologies, Kraków, Poland, 2013, pp. 1069-1084.Search in Google Scholar

[2] J.L. Stein and C-H. Wang, “Analysis of Power Monitoring on AC Induction Drive Systems”, Journal of Dynamic Systems, Measurement, and Control, vol. 112, no. 2, p p. 239-248, 1990.10.1115/1.2896131Search in Google Scholar

[3] F. Zhao, X. Mei, T. Tao, G. Jiang and Y. Zhou, “Fault diagnosis of a machine tool rotary axis based on a motor current test and the ensemble empirical mode decomposition method”, Journal of Mechanical Engineering Science, vol. 225, no. 5, pp. 1121-1129, 2011.Search in Google Scholar

[4] K. Chinmaya and A.R. Mohanty, “Vibration and current transient monitoring for gearbox fault detection using multiresolution Fourier transform”, Journal of Sound and Vibration, vol. 311, no. 1-2, pp. 109-132, 2008.10.1016/j.jsv.2007.08.023Search in Google Scholar

[5] M. AbuAli, J. Lee and W. Zhao, Methods and Systems for Energy Prognosis, United States Patent Application Publication, no. US8527223 B2, 2013.Search in Google Scholar

[6] E.L. Bonaldi, L.E.L. Oliveira, J.G. Borges da Silva, G. Lambert- Torres and L.E. Borges da Silva, “Detecting Load Failures using the Induction Motor as a Transducer”, in 10th Int. Conf. on Control, Automation, Robotics and Vision, Hanoi, Vietnam, 2008, pp. 196-199.10.1109/ICARCV.2008.4795516Search in Google Scholar

[7] H.B. Attia, “Détection et localisation de défauts mécaniques d‘un entraînement électrique à vitesse variable”, Ph.D. dissertation, Institute National Polytechnique de Toulouse, Toulouse, France, 2003.Search in Google Scholar

[8] S. Curran, T.E. Walters and A.J. Chirico, “Health monitoring and prognostics for electro mechanical actuation”, in Proc. of the Int. Conf. on Recent Advances in Aerospace Actuation Systems and Components, Toulouse, France, 2010, pp. 47-55.Search in Google Scholar

[9] C.S. Byington, M. Watson and D. Edwards, “Datadriven neural network methodology to remaining life predictions for aircraft actuator components”, in Proc. IEEE Aerospace Conf., Big Sky, MT, USA, 2004, pp. 3581-3589.Search in Google Scholar

[10] E. Balaban, P. Bansal, P. Stoelting, A. Saxena, K.F. Goebel and S. Curran, “A diagnostic approach for electromechanical actuators in aerospace systems”, in Proc. IEEE Aerospace Conference, Big Sky, MT, USA, 2009, pp. 1-13.10.1109/AERO.2009.4839661Search in Google Scholar

[11] M. Messaoudi and L. Sbita, “Multiple Faults Diagnosis in Induction Motor Using the MCSA Method”, International Journal of Signal and Image Processing, vol. 1, no. 3, pp. 190-195, 2010.Search in Google Scholar

[12] E.L. Bonaldi, L.E.L. Oliveira, J.G. Borges da Silva, G. Lambert-Torres and L.E. Borges da Silva, ”Detecting Load Failures using the Induction Motor as a Transducer”, in 10th Int. Conf. on Control, Automation, Robotics and Vision, Hanoi, Vietnam, 2008, pp. 196-199.10.1109/ICARCV.2008.4795516Search in Google Scholar

[13] UNE-EN 15341:2008.Search in Google Scholar

[14] I. Bravo-Imaz, A. Garcia-Arribas, S. Ferreiro, S. Fernandez and A. Arnaiz, “Motor current signature analysis for gearbox health monitoring: Experiment, signal analysis and classification”, in 2nd European Conf. of the Prognostics and Health Management Society, Nantes, France, 2014, pp. 1-5.Search in Google Scholar

[15] A. Alzaga, E. Konde, I. Bravo, R. Arana, A. Prado, C. Yurre, M. Monnin and G. Medina-Oliva, “New technologies to optimize reliability, operation and maintenance in the use of Machine-Tools”, in Euro-Maintenance Conference, Helsinki, Finland, 2014.Search in Google Scholar

[16] D. Galar, U. Kumar, J. Lee and W. Zhao, “Remaining Useful Life Estimation using Time Trajectory Tracking and Support Vector Machines”, in 25th International Congress on Condition Monitoring and Diagnostic Engineering, Huddersfield, United Kingdom, 2012, pp. 1-10.10.1088/1742-6596/364/1/012063Search in Google Scholar

[17] J.J. de Santiago-Pérez, R.A. Osornio-Rios, R.J. Romero-Troncoso, G. Herrera-Ruiz and M. Delgado-Rosas, “DSP algorithm for the extraction of dynamics parameters in CNC machine tool servomechanisms from an optical incremental encoder”, International Journal of Machine Tools and Manufacture, vol. 48, no. 12-13, pp. 1318-1334, 2008.Search in Google Scholar

[18] B. Huang, H. Gao, X. Mingheng, X. Wu, M. Zhao and L. Guo, “Life Prediction of CNC Linear Rolling Guide Based on DFNN Performance Degradation Model”, in 7th International Conference on Fuzzy Systems and Knowledge Discovery, Yantai, China, 2010, pp. 1310-1314.10.1109/FSKD.2010.5569106Search in Google Scholar

[19] Gloor Engineering. (2014, July 31). Druckluftanlagen [Online]. Available: http://www.energie.ch/themen/industrie/infel/druckluft.htmSearch in Google Scholar

[20] B.V. Dasarathy, “Information Fusion. What, Where, Why, When, and How? Information Fusion”, Information Fusion, vol. 2, no. 2, pp. 75-76, 2001.10.1016/S1566-2535(01)00032-XSearch in Google Scholar