<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper presents a comprehensive design of metrological equipment for torque sensor verification and calibration, detailing the process from conception to construction and highlighting the specifics of the structural design to meet metrological requirements. The measuring device’s functionality and the individual structural components are described, as is the methodology for creating a complete product. The paper addresses the crucial issue of measurement uncertainty and the required accuracy, achieved through the construction of a special measuring arm made of carbon material. FEM analyses of the carbon arm are presented and compared with the required metrological accuracies. In addition, we discuss the different properties of various carbon structures in Pre-preg materials used in the construction of the measuring arm and present the results of measurements on such carbon materials. This paper provides a comprehensive insight into the design and construction of metrological equipment for torque sensors, with a focus on its compliance with metrological requirements. The proposed device aims to establish the foundations for primary metrology of torque in Slovakia and has potential applications in a wide range of industries.</p>
</abstract>

The paper presents a comprehensive design of metrological equipment for torque sensor verification and calibration, detailing the process from conception to construction and highlighting the specifics of the structural design to meet metrological requirements. The measuring device’s functionality and the individual structural components are described, as is the methodology for creating a complete product. The paper addresses the crucial issue of measurement uncertainty and the required accuracy, achieved through the construction of a special measuring arm made of carbon material. FEM analyses of the carbon arm are presented and compared with the required metrological accuracies. In addition, we discuss the different properties of various carbon structures in Pre-preg materials used in the construction of the measuring arm and present the results of measurements on such carbon materials. This paper provides a comprehensive insight into the design and construction of metrological equipment for torque sensors, with a focus on its compliance with metrological requirements. The proposed device aims to establish the foundations for primary metrology of torque in Slovakia and has potential applications in a wide range of industries.

Design and Construction of Metrological Equipment for Torque Sensors with a Carbon-based Measuring Arm

Department of Design and Machine Elements, Faculty of Mechanical Engineering, University of Žilina

Measurement Science Review

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The paper presents a comprehensive design of metrological equipment for torque sensor verification and calibration, detailing the process from conception to...

Design and Construction of Metrological Equipment for Torque Sensors with a Carbon-based Measuring Arm

Pubblicato online: 21 set 2023

Pagine: 163 - 167

Ricevuto: 30 mar 2023

Accettato: 25 lug 2023

DOI: https://doi.org/10.2478/msr-2023-0021

Parole chiave
Metrological equipment, torque, design, composite material, FEM

© 2023 Ľuboš Kučera et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Design and Construction of Metrological Equipment for Torque Sensors with a Carbon-based Measuring Arm

Pubblicato online: 21 set 2023

Pagine: 163 - 167

Ricevuto: 30 mar 2023

Accettato: 25 lug 2023

DOI: https://doi.org/10.2478/msr-2023-0021

Parole chiaveMetrological equipment, torque, design, composite material, FEM

© 2023 Ľuboš Kučera et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Parole chiave
Metrological equipment, torque, design, composite material, FEM