Accesso libero

Design and Construction of Metrological Equipment for Torque Sensors with a Carbon-based Measuring Arm

Ľuboš Kučera

Ľuboš Kučera

University of Žilina, Department of Design and Machine Elements, Faculty of Mechanical Engineering, University of ŽilinaŽilina, Slovakia
Cerca questo autore su
Sciendo|Google Scholar
Kučera, Ľuboš
, 
Tomáš Gajdošík

Tomáš Gajdošík

University of Žilina, Department of Design and Machine Elements, Faculty of Mechanical Engineering, University of ŽilinaŽilina, Slovakia
Cerca questo autore su
Sciendo|Google Scholar
Gajdošík, Tomáš
, 
Igor Gajdáč

Igor Gajdáč

University of Žilina, Department of Design and Machine Elements, Faculty of Mechanical Engineering, University of ŽilinaŽilina, Slovakia
Cerca questo autore su
Sciendo|Google Scholar
Gajdáč, Igor
, 
Lukáš Pompáš

Lukáš Pompáš

University of Žilina, Department of Design and Machine Elements, Faculty of Mechanical Engineering, University of ŽilinaŽilina, Slovakia
Cerca questo autore su
Sciendo|Google Scholar
Pompáš, Lukáš
, 
Lukáš Smetanka

Lukáš Smetanka

University of Žilina, Department of Design and Machine Elements, Faculty of Mechanical Engineering, University of ŽilinaŽilina, Slovakia
Cerca questo autore su
Sciendo|Google Scholar
Smetanka, Lukáš
, 
Viktor Witkovský

Viktor Witkovský

Institute of Measurement Science of the Slovak Academy of SciencesBratislava, Slovakia
Cerca questo autore su
Sciendo|Google Scholar
Witkovský, Viktor
 e 
Gejza Wimmer

Gejza Wimmer

Mathematical Institute of the Slovak Academy of SciencesBRATISLAVA, Slovakia
Cerca questo autore su
Sciendo|Google Scholar
Wimmer, Gejza
  
21 set 2023
Design and Construction of Metrological Equipment for Torque Sensors with a Carbon-based Measuring Arm's Cover Image
INFORMAZIONI SU QUESTO ARTICOLO
Articolo precedente
Articolo Successivo
Cita
Scarica la copertina
Pubblicato online: 21 set 2023
Pagine: 163 - 167
Ricevuto: 30 mar 2023
Accettato: 25 lug 2023
DOI: https://doi.org/10.2478/msr-2023-0021
Parole chiave
© 2023 Ľuboš Kučera et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Lingua:
Inglese
Frequenza di pubblicazione:
6 volte all'anno
Argomenti della rivista:
Ingegneria, Elettrotecnica, Ingegneria dell'automazione, metrologia e collaudo
Feed RSS della rivista