Accesso libero

Diabetic foot assessment using skin impedance in a custom made sensor-sock

Christian Tronstad

Christian Tronstad

Department of Clinical and Biomedical Engineering, Oslo University HospitalOslo, Norway
Cerca questo autore su
Sciendo|Google Scholar
Tronstad, Christian
, 
Maryam Amini

Maryam Amini

Department of Clinical and Biomedical Engineering, Oslo University HospitalOslo, Norway
Cerca questo autore su
Sciendo|Google Scholar
Amini, Maryam
, 
Eline Olesen

Eline Olesen

Department of Physics, University of OsloOslo, Norway
Cerca questo autore su
Sciendo|Google Scholar
Olesen, Eline
, 
Elisabeth Qvigstad

Elisabeth Qvigstad

  • Department of Endocrinology, Morbid Obesity and Preventive Medicine, Oslo University HospitalOslo, Norway
  • Institute of Clinical Medicine, University of OsloOslo, Norway
Cerca questo autore su
Sciendo|Google Scholar
Qvigstad, Elisabeth
, 
Oliver Pabst

Oliver Pabst

Department of Physics, University of OsloOslo, Norway
Cerca questo autore su
Sciendo|Google Scholar
Pabst, Oliver
, 
Tormod Martinsen

Tormod Martinsen

Department of Clinical and Biomedical Engineering, Oslo University HospitalOslo, Norway
Cerca questo autore su
Sciendo|Google Scholar
Martinsen, Tormod
, 
Sisay M. Abie

Sisay M. Abie

Faculty of Ecology and Natural Resource Management, Norwegian University of Life SciencesOslo, Norway
Cerca questo autore su
Sciendo|Google Scholar
Abie, Sisay M.
, 
Ørjan G. Martinsen

Ørjan G. Martinsen

  • Department of Physics, University of OsloOslo, Norway
  • Department of Clinical and Biomedical Engineering, Oslo University HospitalOslo, Norway
Cerca questo autore su
Sciendo|Google Scholar
Martinsen, Ørjan G.
, 
Jonny Hisdal

Jonny Hisdal

  • Department of Vascular Surgery, Oslo University HospitalOslo, Norway
  • Institute of Clinical Medicine, University of OsloOslo, Norway
Cerca questo autore su
Sciendo|Google Scholar
Hisdal, Jonny
, 
Trond G. Jenssen

Trond G. Jenssen

  • Department of Transplantation Medicine, Oslo University HospitalOslo, Norway
  • Institute of Clinical Medicine, University of OsloOslo, Norway
Cerca questo autore su
Sciendo|Google Scholar
Jenssen, Trond G.
 e 
Håvard Kalvøy

Håvard Kalvøy

Department of Clinical and Biomedical Engineering, Oslo University HospitalOslo, Norway
Cerca questo autore su
Sciendo|Google Scholar
Kalvøy, Håvard
  
14 gen 2023
Diabetic foot assessment using skin impedance in a custom made sensor-sock's Cover Image
INFORMAZIONI SU QUESTO ARTICOLO
Articolo precedente
Articolo Successivo
Cita
Scarica la copertina
Pubblicato online: 14 gen 2023
Pagine: 136 - 142
Ricevuto: 07 dic 2022
DOI: https://doi.org/10.2478/joeb-2022-0019
Parole chiave
© 2022 Christian Tronstad, Maryam Amini, Eline Olesen, Elisabeth Qvigstad , Oliver Pabst, Tormod Martinsen, Sisay M. Abie, Ørjan G. Martinsen, Jonny Hisdal, Trond G. Jenssen, Håvard Kalvøy, published by Sciendo
This work is licensed under the Creative Commons Attribution 4.0 International License.

Figure 1

Screenshot from Eagle CAD design showing the electrode geometry (each grid unit is 1mm).
Screenshot from Eagle CAD design showing the electrode geometry (each grid unit is 1mm).

Figure 2

Axisymmetric 2D distribution of simulated volume impedance density below the electrode for low (a) and high (b) frequency impedance measurement. The color gradient indicates the volume impedance density, presented on a logarithmic scale.
Axisymmetric 2D distribution of simulated volume impedance density below the electrode for low (a) and high (b) frequency impedance measurement. The color gradient indicates the volume impedance density, presented on a logarithmic scale.

Figure 3

CAD design of sensor parts for skin impedance measurement at the big toe (A), toeball (B) and heel (C). The 3D printed parts for sensor housing are shown in D, and all parts connected to the foot are shown in E.
CAD design of sensor parts for skin impedance measurement at the big toe (A), toeball (B) and heel (C). The 3D printed parts for sensor housing are shown in D, and all parts connected to the foot are shown in E.

Figure 4

An example measurement of change in measured skin impedance over 30 minutes using the electrode probe at the big toe pulp of a healthy subject. These measurements were done with the Solartron 1260+1294.
An example measurement of change in measured skin impedance over 30 minutes using the electrode probe at the big toe pulp of a healthy subject. These measurements were done with the Solartron 1260+1294.

Figure 5

Impedance spectra presented as the impedance modulus (|Z|), resistance (R) and reactance (X) for all participants from the control (black) and DPN group (blue). The bumpy curves with the highest impedance in the toeball and heel plots curves are affected by measurement error due to the high impedance levels and do not represent a true frequency-dependency of the skin impedance.
Impedance spectra presented as the impedance modulus (|Z|), resistance (R) and reactance (X) for all participants from the control (black) and DPN group (blue). The bumpy curves with the highest impedance in the toeball and heel plots curves are affected by measurement error due to the high impedance levels and do not represent a true frequency-dependency of the skin impedance.

Figure 6

Comparison of the repeatability of all measurements (control and DPN groups combined) between the different skin sites presented in a boxplot with group means added in grey dots. White dots represent outliers and edges of the whiskers represent the minimum and maximum non-outlier values within the groups. Repeatability was calculated using the log10-transformed impedance modulus at 10 Hz, taking the standard deviation of the successive measurements divided by the mean.
Comparison of the repeatability of all measurements (control and DPN groups combined) between the different skin sites presented in a boxplot with group means added in grey dots. White dots represent outliers and edges of the whiskers represent the minimum and maximum non-outlier values within the groups. Repeatability was calculated using the log10-transformed impedance modulus at 10 Hz, taking the standard deviation of the successive measurements divided by the mean.
Lingua:
Inglese
Frequenza di pubblicazione:
1 volte all'anno
Argomenti della rivista:
Ingegneria, Bioingegneria ed ingegneria biomedicale, Elettronica biomedicale, Scienze biologiche, Biofisica, Medicina, Ingegneria biomedica, Fisica, Spettroscopia e metrologia
Feed RSS della rivista