<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper studies the effect of the presence of a thermal interface material between a heat source and a heat sink. A heat sink is used as a passive cooling device for a thick film heating element used as a heat source. The heating element is fixed using 2 screws. The temperatures are measured in 2 scenarios: first, where the heating element is placed directly on the heat sink, and second, where a thermal pad is placed between the heat source and heat sink. Using a similar CAD model as the one tested and the same boundary conditions, finite element analysis were solved. The goal is to see if the finite element method delivers similar results as the measured ones and if the method is reliable in predicting the thermal behaviour of the electronic components. Temperature measurements show an improvement in heat source cooling when the thermal interface material is placed between the heat source and heating element. Also, the temperatures from the finite element analysis are similar to the measured ones, making the method reliable for similar applications.</p>
</abstract>

This paper studies the effect of the presence of a thermal interface material between a heat source and a heat sink. A heat sink is used as a passive cooling device for a thick film heating element used as a heat source. The heating element is fixed using 2 screws. The temperatures are measured in 2 scenarios: first, where the heating element is placed directly on the heat sink, and second, where a thermal pad is placed between the heat source and heat sink. Using a similar CAD model as the one tested and the same boundary conditions, finite element analysis were solved. The goal is to see if the finite element method delivers similar results as the measured ones and if the method is reliable in predicting the thermal behaviour of the electronic components. Temperature measurements show an improvement in heat source cooling when the thermal interface material is placed between the heat source and heating element. Also, the temperatures from the finite element analysis are similar to the measured ones, making the method reliable for similar applications.

A Study on the Influence of Thermal Interface Material in Passively Cooled Electrical Components with Attached Heatsink

“Gheorghe Asachi” Technical University of Iaşi

Bulletin of the Polytechnic Institute of Iași. Machine constructions Section

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This paper studies the effect of the presence of a thermal interface material between a heat source and a heat sink. A heat sink is used as a passive cooling...

A Study on the Influence of Thermal Interface Material in Passively Cooled Electrical Components with Attached Heatsink

Pubblicato online: 22 lug 2023

Pagine: 95 - 104

Ricevuto: 02 apr 2023

Accettato: 20 apr 2023

DOI: https://doi.org/10.2478/bipcm-2023-0007

Parole chiave
FEA, heat sink, thermal, passive cooling, thermal pad, thermal interface material

© 2023 George-Gabriel Chiriac et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

A Study on the Influence of Thermal Interface Material in Passively Cooled Electrical Components with Attached Heatsink

Pubblicato online: 22 lug 2023

Pagine: 95 - 104

Ricevuto: 02 apr 2023

Accettato: 20 apr 2023

DOI: https://doi.org/10.2478/bipcm-2023-0007

Parole chiaveFEA, heat sink, thermal, passive cooling, thermal pad, thermal interface material

© 2023 George-Gabriel Chiriac et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Parole chiave
FEA, heat sink, thermal, passive cooling, thermal pad, thermal interface material