This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Next Generation and Future of GE | General Electric. Available at: https://www.ge.com/additive/sites/default/files/2020-08/GE9X%20Additive%20parts.pdfThe Next Generation and Future of GE | General Electric.Available at: https://www.ge.com/additive/sites/default/files/2020-08/GE9X%20Additive%20parts.pdfSearch in Google Scholar
Kozak, J. and Zakrzewski, T. “Accuracy Problems of Additive Manufacturing using SLS/SLM Processes.” AIP Conference Proceedings, 2018. DOI 10.1063/1.5056273.KozakJ. and ZakrzewskiT.“Accuracy Problems of Additive Manufacturing using SLS/SLM Processes.”AIP Conference Proceedings,2018.DOI10.1063/1.5056273.Open DOISearch in Google Scholar
Meier, C., Penny, R.W., Zou, Y., Gibbs, J.S., and Hart, A.J. Thermophysical Phenomena in Metal Additive Manufacturing by Selective Laser Melting: Fundamentals, Modeling, Simulation and Experimentation. Mechanosynthesis Group, Department of Mechanical Engineering, Massachusetts Institute, Cambridge (2017).MeierC.PennyR.W.ZouY.GibbsJ.S. and HartA.J.Thermophysical Phenomena in Metal Additive Manufacturing by Selective Laser Melting: Fundamentals, Modeling, Simulation and Experimentation.Mechanosynthesis Group, Department of Mechanical Engineering, Massachusetts Institute,Cambridge(2017).Search in Google Scholar
Zakrzewski, T., Kozak, J., Witt, M., and Dębowska-Wąsak, M. “Dimensional Analysis of the Effect of SLM Parameters on Surface Roughness and Material Density.” 20st CIRP Conference on Electro Phisical and Chemical Machining XX, Book Series: Procedia CIRP, Zürich (2021): pp. 115–120.ZakrzewskiT.KozakJ.WittM. and Dębowska-WąsakM.“Dimensional Analysis of the Effect of SLM Parameters on Surface Roughness and Material Density.”20st CIRP Conference on Electro Phisical and Chemical Machining XX, Book Series: Procedia CIRP,Zürich(2021): pp.115–120.Search in Google Scholar
Kozak, J., Zakrzewski, T., Witt, M., and Dębowska-Wąsak, M. “Selected Problems of Additive Manufacturing Using SLS/SLM Processes.” Transactions on Aerospace Research Vol. 1 No. 262 (2021): pp. 24–44.KozakJ.ZakrzewskiT.WittM. and Dębowska-WąsakM.“Selected Problems of Additive Manufacturing Using SLS/SLM Processes.”Transactions on Aerospace ResearchVol.1No.262(2021): pp.24–44.Search in Google Scholar
DebRoy, T., Wei, H.L., and Zuback, J.S. “Additive Manufacturing of Metallic Components – Process, Structure and Properties.” Progress in Materials Science Vol. 92 (2018): 112–224.DebRoyT.WeiH.L. and ZubackJ.S.“Additive Manufacturing of Metallic Components – Process, Structure and Properties.”Progress in Materials ScienceVol.92(2018):112–224.Search in Google Scholar
Bayat, M., Dong, W., Thorborg, J., To, A.C., and Hattel, J.H. “A Review of Multi-Scale and Multi-Physics Simulations of Metal Additive Manufacturing Processes with Focus on Modelling Strategies.” Additive Manufacturing Vol. 47 (2021): p. 102278.BayatM.DongW.ThorborgJ.ToA.C. and HattelJ.H.“A Review of Multi-Scale and Multi-Physics Simulations of Metal Additive Manufacturing Processes with Focus on Modelling Strategies.”Additive ManufacturingVol.47(2021): p.102278.Search in Google Scholar
Dezfoli, Amir Reza Ansari, Hwang, Weng-Sing, Huang, Wei-Chin, and Tsai, Tsung-Wen. (2017). “Determination and Controlling of Grain Structure of Metals after Laser Incidence: Theoretical Approach.” Scientific Reports Vol. 7 (2017): article: 41527.DezfoliAmir Reza AnsariHwangWeng-SingHuangWei-Chin and TsaiTsung-Wen.(2017). “Determination and Controlling of Grain Structure of Metals after Laser Incidence: Theoretical Approach.”Scientific ReportsVol.7(2017):article: 41527.Search in Google Scholar
Kozak, J. Mathematical Modelling of Advanced Manufacturing Processes. Institute of Aviation Scientific Publications Division, Warsaw (2018).KozakJ.Mathematical Modelling of Advanced Manufacturing Processes.Institute of Aviation Scientific Publications Division,Warsaw(2018).Search in Google Scholar
Zakrzewski, T. “Optimization SLS/SLM Process Conditions to Minimize Product Inaccuracy.” PhD Dissertation. The Warsaw University of Technology. 2022. Available at: https://www.wip.pw.edu.pl/Media/RecenzjeKF/Streszczenie-pracy-mgr.-inz.-Tomasza-ZakrzewskiegoZakrzewskiT.“Optimization SLS/SLM Process Conditions to Minimize Product Inaccuracy.”PhD Dissertation.The Warsaw University of Technology.2022.Available at: https://www.wip.pw.edu.pl/Media/RecenzjeKF/Streszczenie-pracy-mgr.-inz.-Tomasza-ZakrzewskiegoSearch in Google Scholar
Kruth, J.-P., Dadbakhsh, S., Vrancken, B., Kempen, K., Vleugels, J., Van Humbeeck, J., Srivatsan, T., & Sudarshan, T. (2016). Additive Manufacturing of Metals via Selective Laser Melting Process Aspects and Material Developments. In Additive Manufacturing: Innovations, Advances and Applications (pp. 69–99). CRC PRESS-TAYLOR & FRANCIS GROUP.KruthJ.-P.DadbakhshS.VranckenB.KempenK.VleugelsJ.Van HumbeeckJ.SrivatsanT. & SudarshanT.(2016).Additive Manufacturing of Metals via Selective Laser Melting Process Aspects and Material Developments.In Additive Manufacturing: Innovations, Advances and Applications(pp.69–99).CRC PRESS-TAYLOR & FRANCIS GROUP.Search in Google Scholar
Zeng, K.; Pal, D.; Stucker, B. A review of thermal analysis methods in laser sintering and selective laser melting. In Proceedings of the Solid Freeform Fabrication Symposium Austin, Austin, TX, USA, 6–8 August 2012; Vol. 60 (2012): 796–814.ZengK.PalD.StuckerB.A review of thermal analysis methods in laser sintering and selective laser melting.In Proceedings of the Solid Freeform Fabrication Symposium Austin,Austin, TX, USA,6–8August2012; Vol.60(2012):796–814.Search in Google Scholar
Kyogoku, H. and Ikeshojia, T. “A review of metal additive manufacturing technologies: Mechanism of defects formation and simulation of melting and solidification phenomena in laser powder bed fusion process”, Mechanical Engineering Reviews, 2020, Vol. 7 (1): 19-00182KyogokuH. and IkeshojiaT.“A review of metal additive manufacturing technologies: Mechanism of defects formation and simulation of melting and solidification phenomena in laser powder bed fusion process”,Mechanical Engineering Reviews,2020, Vol.7(1):19-00182Search in Google Scholar
Schoinochoritis, B., Chantzis, D., and Salonitis, K. “Simulation of Metallic Powder Bed Additive Manufacturing Processes with the Finite Element Method: A Critical Review.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2017; 231(1): 96–117.SchoinochoritisB.ChantzisD. and SalonitisK.“Simulation of Metallic Powder Bed Additive Manufacturing Processes with the Finite Element Method: A Critical Review.”Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.2017;231(1):96–117.Search in Google Scholar
Gong, K., Gu, H., Rafi, H., Starr, T., and Stucker, B. “Analysis of Defect Generation in Ti-6Al-4V Parts Made using Powder Bed Fusion Additive Manufacturing Processes.” Additive Manufacturing Vol. 1 (2014): pp. 87–98.GongK.GuH.RafiH.StarrT. and StuckerB.“Analysis of Defect Generation in Ti-6Al-4V Parts Made using Powder Bed Fusion Additive Manufacturing Processes.”Additive ManufacturingVol.1(2014): pp.87–98.Search in Google Scholar
Engelhardt, A., Kahl, M., Richter, J., Krooß, P., Kroll, A., and Niendorf, T. “Investigation of Processing Windows in Additive Manufacturing of AlSi10Mg for Faster Production Utilizing Data-Driven Modeling.” Additive Manufacturing Vol. 55 (2022): article: 102858.EngelhardtA.KahlM.RichterJ.KrooßP.KrollA. and NiendorfT.“Investigation of Processing Windows in Additive Manufacturing of AlSi10Mg for Faster Production Utilizing Data-Driven Modeling.”Additive ManufacturingVol.55(2022):article: 102858.Search in Google Scholar
Ridolfi, M.R., Folgarait, P., and Di Schino, A. “Laser Operating Windows Prediction in Selective Laser-Melting Processing of Metallic Powders: Development and Validation of a Computational Fluid Dynamics-Based Model.” Materials Vol. 13 (2020): article 1424.RidolfiM.R.FolgaraitP. and Di SchinoA.“Laser Operating Windows Prediction in Selective Laser-Melting Processing of Metallic Powders: Development and Validation of a Computational Fluid Dynamics-Based Model.”MaterialsVol.13(2020):article 1424.Search in Google Scholar
Ahn, I.H. “Determination of a Process Window with Consideration of Effective Layer Thickness in SLM Process.” The International Journal of Advanced Manufacturing Technology Vol. 105 (2019): pp. 4181–4191.AhnI.H.“Determination of a Process Window with Consideration of Effective Layer Thickness in SLM Process.”The International Journal of Advanced Manufacturing TechnologyVol.105(2019): pp.4181–4191.Search in Google Scholar
COMSOL Multiphysics® version 5.6. COMSOL AB, Stockholm, Sweden. Available at: www.comsol.comCOMSOL Multiphysics® version 5.6.COMSOL AB,Stockholm, Sweden.Availableat:www.comsol.comSearch in Google Scholar
Simulation of Laser Powder-bed Fusion Additive Manufacturing Process Using the COMSOL Multiphysics® software. COMSOL - Software for Multiphysics Simulation. Available at: https://www.comsol.com/paper/simulation-of-laser-powder-bed-fusion-additive-manufacturing-process-using-the-c-65242Simulation of Laser Powder-bed Fusion Additive Manufacturing Process Using the COMSOL Multiphysics® software.COMSOL - Software for Multiphysics Simulation.Available at: https://www.comsol.com/paper/simulation-of-laser-powder-bed-fusion-additive-manufacturing-process-using-the-c-65242Search in Google Scholar
Zhu, J-N., Borisov, E., Liang, X., Farber, E., Hermans, M.J.M., and Popovich, V.A. “Predictive Analytical Modelling and Experimental Validation of Processing Maps in Additive Manufacturing of Nitinol Alloys.” Additive Manufacturing Vol. 38 (Feb. 2021): article 101802.ZhuJ-N.BorisovE.LiangX.FarberE.HermansM.J.M. and PopovichV.A.“Predictive Analytical Modelling and Experimental Validation of Processing Maps in Additive Manufacturing of Nitinol Alloys.”Additive ManufacturingVol.38(Feb.2021):article 101802.Search in Google Scholar