Thermal Operating Window in Selective Laser Melting Processes

[1] The Next Generation and Future of GE | General Electric. Available at: https://www.ge.com/additive/sites/default/files/2020-08/GE9X%20Additive%20parts.pdf The Next Generation and Future of GE | General Electric . Available at: https://www.ge.com/additive/sites/default/files/2020-08/GE9X%20Additive%20parts.pdf Search in Google Scholar

[2] Kozak, J. and Zakrzewski, T. “Accuracy Problems of Additive Manufacturing using SLS/SLM Processes.” AIP Conference Proceedings, 2018. DOI 10.1063/1.5056273. Kozak J. and Zakrzewski T . “ Accuracy Problems of Additive Manufacturing using SLS/SLM Processes . ” AIP Conference Proceedings , 2018 . DOI 10.1063/1.5056273 . Open DOISearch in Google Scholar

[3] Meier, C., Penny, R.W., Zou, Y., Gibbs, J.S., and Hart, A.J. Thermophysical Phenomena in Metal Additive Manufacturing by Selective Laser Melting: Fundamentals, Modeling, Simulation and Experimentation. Mechanosynthesis Group, Department of Mechanical Engineering, Massachusetts Institute, Cambridge (2017). Meier C. Penny R.W. Zou Y. Gibbs J.S. and Hart A.J. Thermophysical Phenomena in Metal Additive Manufacturing by Selective Laser Melting: Fundamentals, Modeling, Simulation and Experimentation . Mechanosynthesis Group, Department of Mechanical Engineering, Massachusetts Institute , Cambridge ( 2017 ) . Search in Google Scholar

[4] Zakrzewski, T., Kozak, J., Witt, M., and Dębowska-Wąsak, M. “Dimensional Analysis of the Effect of SLM Parameters on Surface Roughness and Material Density.” 20st CIRP Conference on Electro Phisical and Chemical Machining XX, Book Series: Procedia CIRP, Zürich (2021): pp. 115–120. Zakrzewski T. Kozak J. Witt M. and Dębowska-Wąsak M . “ Dimensional Analysis of the Effect of SLM Parameters on Surface Roughness and Material Density . ” 20st CIRP Conference on Electro Phisical and Chemical Machining XX, Book Series: Procedia CIRP , Zürich ( 2021 ): pp. 115 – 120 . Search in Google Scholar

[5] Kozak, J., Zakrzewski, T., Witt, M., and Dębowska-Wąsak, M. “Selected Problems of Additive Manufacturing Using SLS/SLM Processes.” Transactions on Aerospace Research Vol. 1 No. 262 (2021): pp. 24–44. Kozak J. Zakrzewski T. Witt M. and Dębowska-Wąsak M . “ Selected Problems of Additive Manufacturing Using SLS/SLM Processes . ” Transactions on Aerospace Research Vol. 1 No. 262 ( 2021 ): pp. 24 – 44 . Search in Google Scholar

[6] DebRoy, T., Wei, H.L., and Zuback, J.S. “Additive Manufacturing of Metallic Components – Process, Structure and Properties.” Progress in Materials Science Vol. 92 (2018): 112–224. DebRoy T. Wei H.L. and Zuback J.S. “ Additive Manufacturing of Metallic Components – Process, Structure and Properties . ” Progress in Materials Science Vol. 92 ( 2018 ): 112 – 224 . Search in Google Scholar

[7] Bayat, M., Dong, W., Thorborg, J., To, A.C., and Hattel, J.H. “A Review of Multi-Scale and Multi-Physics Simulations of Metal Additive Manufacturing Processes with Focus on Modelling Strategies.” Additive Manufacturing Vol. 47 (2021): p. 102278. Bayat M. Dong W. Thorborg J. To A.C. and Hattel J.H. “ A Review of Multi-Scale and Multi-Physics Simulations of Metal Additive Manufacturing Processes with Focus on Modelling Strategies . ” Additive Manufacturing Vol. 47 ( 2021 ): p. 102278 . Search in Google Scholar

[8] Dezfoli, Amir Reza Ansari, Hwang, Weng-Sing, Huang, Wei-Chin, and Tsai, Tsung-Wen. (2017). “Determination and Controlling of Grain Structure of Metals after Laser Incidence: Theoretical Approach.” Scientific Reports Vol. 7 (2017): article: 41527. Dezfoli Amir Reza Ansari Hwang Weng-Sing Huang Wei-Chin and Tsai Tsung-Wen . ( 2017 ). “ Determination and Controlling of Grain Structure of Metals after Laser Incidence: Theoretical Approach . ” Scientific Reports Vol. 7 ( 2017 ): article: 41527 . Search in Google Scholar

[9] Kozak, J. Mathematical Modelling of Advanced Manufacturing Processes. Institute of Aviation Scientific Publications Division, Warsaw (2018). Kozak J . Mathematical Modelling of Advanced Manufacturing Processes . Institute of Aviation Scientific Publications Division , Warsaw ( 2018 ) . Search in Google Scholar

[10] Zakrzewski, T. “Optimization SLS/SLM Process Conditions to Minimize Product Inaccuracy.” PhD Dissertation. The Warsaw University of Technology. 2022. Available at: https://www.wip.pw.edu.pl/Media/RecenzjeKF/Streszczenie-pracy-mgr.-inz.-Tomasza-Zakrzewskiego Zakrzewski T . “ Optimization SLS/SLM Process Conditions to Minimize Product Inaccuracy . ” PhD Dissertation . The Warsaw University of Technology . 2022 . Available at: https://www.wip.pw.edu.pl/Media/RecenzjeKF/Streszczenie-pracy-mgr.-inz.-Tomasza-Zakrzewskiego Search in Google Scholar

[11] Kruth, J.-P., Dadbakhsh, S., Vrancken, B., Kempen, K., Vleugels, J., Van Humbeeck, J., Srivatsan, T., & Sudarshan, T. (2016). Additive Manufacturing of Metals via Selective Laser Melting Process Aspects and Material Developments. In Additive Manufacturing: Innovations, Advances and Applications (pp. 69–99). CRC PRESS-TAYLOR & FRANCIS GROUP. Kruth J.-P. Dadbakhsh S. Vrancken B. Kempen K. Vleugels J. Van Humbeeck J. Srivatsan T. & Sudarshan T . ( 2016 ). Additive Manufacturing of Metals via Selective Laser Melting Process Aspects and Material Developments . In Additive Manufacturing: Innovations, Advances and Applications (pp. 69 – 99 ). CRC PRESS-TAYLOR & FRANCIS GROUP . Search in Google Scholar

[12] Zeng, K.; Pal, D.; Stucker, B. A review of thermal analysis methods in laser sintering and selective laser melting. In Proceedings of the Solid Freeform Fabrication Symposium Austin, Austin, TX, USA, 6–8 August 2012; Vol. 60 (2012): 796–814. Zeng K. Pal D. Stucker B . A review of thermal analysis methods in laser sintering and selective laser melting . In Proceedings of the Solid Freeform Fabrication Symposium Austin , Austin, TX, USA , 6–8 August 2012 ; Vol. 60 ( 2012 ): 796 – 814 . Search in Google Scholar

[13] Kyogoku, H. and Ikeshojia, T. “A review of metal additive manufacturing technologies: Mechanism of defects formation and simulation of melting and solidification phenomena in laser powder bed fusion process”, Mechanical Engineering Reviews, 2020, Vol. 7 (1): 19-00182 Kyogoku H. and Ikeshojia T . “ A review of metal additive manufacturing technologies: Mechanism of defects formation and simulation of melting and solidification phenomena in laser powder bed fusion process ”, Mechanical Engineering Reviews , 2020 , Vol. 7 ( 1 ): 19-00182 Search in Google Scholar

[14] Schoinochoritis, B., Chantzis, D., and Salonitis, K. “Simulation of Metallic Powder Bed Additive Manufacturing Processes with the Finite Element Method: A Critical Review.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2017; 231(1): 96–117. Schoinochoritis B. Chantzis D. and Salonitis K . “ Simulation of Metallic Powder Bed Additive Manufacturing Processes with the Finite Element Method: A Critical Review . ” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture . 2017 ; 231 ( 1 ): 96 – 117 . Search in Google Scholar

[15] Gong, K., Gu, H., Rafi, H., Starr, T., and Stucker, B. “Analysis of Defect Generation in Ti-6Al-4V Parts Made using Powder Bed Fusion Additive Manufacturing Processes.” Additive Manufacturing Vol. 1 (2014): pp. 87–98. Gong K. Gu H. Rafi H. Starr T. and Stucker B . “ Analysis of Defect Generation in Ti-6Al-4V Parts Made using Powder Bed Fusion Additive Manufacturing Processes . ” Additive Manufacturing Vol. 1 ( 2014 ): pp. 87 – 98 . Search in Google Scholar

[16] Engelhardt, A., Kahl, M., Richter, J., Krooß, P., Kroll, A., and Niendorf, T. “Investigation of Processing Windows in Additive Manufacturing of AlSi10Mg for Faster Production Utilizing Data-Driven Modeling.” Additive Manufacturing Vol. 55 (2022): article: 102858. Engelhardt A. Kahl M. Richter J. Krooß P. Kroll A. and Niendorf T . “ Investigation of Processing Windows in Additive Manufacturing of AlSi10Mg for Faster Production Utilizing Data-Driven Modeling . ” Additive Manufacturing Vol. 55 ( 2022 ): article: 102858 . Search in Google Scholar

[17] Ridolfi, M.R., Folgarait, P., and Di Schino, A. “Laser Operating Windows Prediction in Selective Laser-Melting Processing of Metallic Powders: Development and Validation of a Computational Fluid Dynamics-Based Model.” Materials Vol. 13 (2020): article 1424. Ridolfi M.R. Folgarait P. and Di Schino A . “ Laser Operating Windows Prediction in Selective Laser-Melting Processing of Metallic Powders: Development and Validation of a Computational Fluid Dynamics-Based Model . ” Materials Vol. 13 ( 2020 ): article 1424 . Search in Google Scholar

[18] Ahn, I.H. “Determination of a Process Window with Consideration of Effective Layer Thickness in SLM Process.” The International Journal of Advanced Manufacturing Technology Vol. 105 (2019): pp. 4181–4191. Ahn I.H. “ Determination of a Process Window with Consideration of Effective Layer Thickness in SLM Process . ” The International Journal of Advanced Manufacturing Technology Vol. 105 ( 2019 ): pp. 4181 – 4191 . Search in Google Scholar

[19] COMSOL Multiphysics® version 5.6. COMSOL AB, Stockholm, Sweden. Available at: www.comsol.com COMSOL Multiphysics® version 5.6 . COMSOL AB , Stockholm, Sweden . Availableat:www.comsol.com Search in Google Scholar

[20] Simulation of Laser Powder-bed Fusion Additive Manufacturing Process Using the COMSOL Multiphysics® software. COMSOL - Software for Multiphysics Simulation. Available at: https://www.comsol.com/paper/simulation-of-laser-powder-bed-fusion-additive-manufacturing-process-using-the-c-65242 Simulation of Laser Powder-bed Fusion Additive Manufacturing Process Using the COMSOL Multiphysics® software . COMSOL - Software for Multiphysics Simulation . Available at: https://www.comsol.com/paper/simulation-of-laser-powder-bed-fusion-additive-manufacturing-process-using-the-c-65242 Search in Google Scholar

[21] Zhu, J-N., Borisov, E., Liang, X., Farber, E., Hermans, M.J.M., and Popovich, V.A. “Predictive Analytical Modelling and Experimental Validation of Processing Maps in Additive Manufacturing of Nitinol Alloys.” Additive Manufacturing Vol. 38 (Feb. 2021): article 101802. Zhu J-N. Borisov E. Liang X. Farber E. Hermans M.J.M. and Popovich V.A. “ Predictive Analytical Modelling and Experimental Validation of Processing Maps in Additive Manufacturing of Nitinol Alloys . ” Additive Manufacturing Vol. 38 ( Feb . 2021 ): article 101802 . Search in Google Scholar