<abstract xmlns="http://www.w3.org/1999/xhtml">
Aluminium nitride thin films were fabricated using pulsed laser deposition and DC magnetron sputtering. Different technological parameters and the effects of different substrates on the optical and structural parameters of AlN samples were studied. An X-ray diffraction study was performed for the layer deposited on the Si3N4 substrate. A high-energy electron diffraction study was also carried out for the layer deposited on a KCl substrate. Transmission spectra of layers on quartz, sapphire, and glass substrates were obtained. An evaluation of the optical band gap of the obtained layers was carried out (<italic>Eg</italic> form 3.81 to 5.81 eV) and the refractive index was calculated (2.58). The relative density of the film (N1TN-AlN sample) is 1.26 and was calculated using the Lorentz-Lorentz relationship. Layers of aluminium nitride show an amorphous character with a polycrystalline region. It was shown that the properties of AlN films strongly depend on the method, growth conditions, and substrate used.
</abstract>

Aluminium nitride thin films were fabricated using pulsed laser deposition and DC magnetron sputtering. Different technological parameters and the effects of different substrates on the optical and structural parameters of AlN samples were studied. An X-ray diffraction study was performed for the layer deposited on the Si3N4 substrate. A high-energy electron diffraction study was also carried out for the layer deposited on a KCl substrate. Transmission spectra of layers on quartz, sapphire, and glass substrates were obtained. An evaluation of the optical band gap of the obtained layers was carried out (Eg form 3.81 to 5.81 eV) and the refractive index was calculated (2.58). The relative density of the film (N1TN-AlN sample) is 1.26 and was calculated using the Lorentz-Lorentz relationship. Layers of aluminium nitride show an amorphous character with a polycrystalline region. It was shown that the properties of AlN films strongly depend on the method, growth conditions, and substrate used.

Structural and Optical Properties of Aluminium Nitride Thin Films Fabricated Using Pulsed Laser Deposition and DC Magnetron Sputtering on Various Substrates

Institute of Materials Engineering, College of Natural Sciences

Institute of Physics, College of Natural Sciences

Advances in Materials Science

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Aluminium nitride thin films were fabricated using pulsed laser deposition and DC magnetron sputtering. Different technological parameters and the effects of...

Structural and Optical Properties of Aluminium Nitride Thin Films Fabricated Using Pulsed Laser Deposition and DC Magnetron Sputtering on Various Substrates

Publié en ligne: 16 mars 2024

Pages: 5 - 16

DOI: https://doi.org/10.2478/adms-2024-0001

Mots clés
thin solid films, AlN, optical properties, structural properties, PLD, DC magnetron sputtering

© 2024 Ihor Virt et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Structural and Optical Properties of Aluminium Nitride Thin Films Fabricated Using Pulsed Laser Deposition and DC Magnetron Sputtering on Various Substrates

Publié en ligne: 16 mars 2024

Pages: 5 - 16

DOI: https://doi.org/10.2478/adms-2024-0001

Mots clésthin solid films, AlN, optical properties, structural properties, PLD, DC magnetron sputtering

© 2024 Ihor Virt et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
thin solid films, AlN, optical properties, structural properties, PLD, DC magnetron sputtering