1. bookVolumen 29 (2021): Edición 4 (December 2021)
Detalles de la revista
License
Formato
Revista
eISSN
2450-5781
Primera edición
30 Mar 2017
Calendario de la edición
4 veces al año
Idiomas
Inglés
access type Acceso abierto

Dynamic Control of Discharge Energy During WEDM for the Purpose of Eliminating Vibrations of the Wire Tool Electrode

Publicado en línea: 14 Dec 2021
Volumen & Edición: Volumen 29 (2021) - Edición 4 (December 2021)
Páginas: 260 - 265
Detalles de la revista
License
Formato
Revista
eISSN
2450-5781
Primera edición
30 Mar 2017
Calendario de la edición
4 veces al año
Idiomas
Inglés
Abstract

Production in all industry fields is currently affected by new scientific and technical knowledge and the requirements for its rapid deployment. In many cases, the most modern and highly sophisticated technical systems are applied. Simultaneously, fully automated production systems are rather successfully used and progressive production technologies are implemented. In most cases, there is an integral part of a management system that operates the challenging technological processes. These processes would not be executable without the system’s precise control, which provides a suitable precondition for ensuring the high quality of manufactured products. However, the customer’s demanding requirements are not always met. These involve increased requests for the quality of the final product due to the reduction of the tolerance band and application of high-strength materials. This paper aims to describe one of the solutions by which it is possible to achieve a higher quality of the machined surface after wire electrical discharge machining (WEDM). The solution proposes that through dynamic management, the WEDM process eliminates the vibrations of the wire tool electrode and thereby achieves a substantial increase in the quality of the eroded area in terms of its geometric accuracy. With the support of an extensive database of information with precise exchange of information, the proposed system will allow to control the electro discharge process with regard to the optimal way of operation of the electro discharge machine on the basis of individually selected conditions.

Keywords

[1] S.K. Barik and P.S. Rao. “Design of Pulse Circuit of EDM Die-sinker.” International Research Journal of Engineering and Technology, vol. 3(5), pp. 2762-2765, 2016. Search in Google Scholar

[2] F. Botko, M. Hatala, P. Beraxa, J. Duplák and J. Zajac. “Determination of CVD coating thickness for shaped surface tool.” TEM Journal, vol. 7(2), pp. 428-432, 2018. Search in Google Scholar

[3] R. Davis, A. Singh, S. Kachhap and N. Nath. “A comparative study of EDD and PM-EDD in producing holes in inconel 718 alloy.” Key Engineering Materials, vol. 833, pp. 48-53, 2020.10.4028/www.scientific.net/KEM.833.48 Search in Google Scholar

[4] E. Evin, M. Tomáš and J. Kmec. “Optimization of electro-discharge texturing parameters for steel sheets’ finishing rollers.” Materials, vol. 13(5), art. no. 1223, 2020.10.3390/ma13051223708503832182783 Search in Google Scholar

[5] S. Hamed, L.A. Al-Juboori, V.N. Najm and A.M. Saleh. “Analysis the impact of WEDM parameters on surface microstructure using response surface methodology.” ASET 2020, Advances in Science and Engineering Technology International Conferences, Dubai, 4-9 February 2020, art no. 9118208, 2020. Search in Google Scholar

[6] S. Hašová and Ľ. Straka. “Design and verification of software for simulation of selected quality indicators of machined surface after WEDM.” Academic Journal of Manufacturing Engineering, vol. 14(2), pp. 13-20, 2016. Search in Google Scholar

[7] E. Kuznetsov, V. Nahornyi and T. Krenicky. “Gas Flow Simulation in the Working Gap of Impulse Gas-barrier Face Seal.” Management Systems in Production Engineering, vol. 28(4), pp. 298-303, 2020.10.2478/mspe-2020-0042 Search in Google Scholar

[8] J. Maščenik. “Implementation of the designed program for calculation and check of chain gears.” MM Science Journal, vol. 2019 (december), pp. 3431-3434, 2019.10.17973/MMSJ.2019_12_2019008 Search in Google Scholar

[9] K. Mouralova, L. Benes, J. Bednar, R. Zahradnicek, T. Prokes and J. Fries. “Analysis of machinability and crack occurrence of steels 1.2363 and 1.2343ESR machined by die-sinking EDM.” Coatings, vol. 10(4), art. no. 406, 2020. Search in Google Scholar

[10] V. Ngocpi, D.T. Tam, N.M. Cuong and T.H. Tran. “Multi-objective optimization of PMEDM process parameters for processing cylindrical shaped parts using taguchi method and grey relational analysis.” International Journal of Mechanical and Production Engineering Research and Development, vol. 10(2), pp. 669-678, 2020. Search in Google Scholar

[11] Š. Olejarova and T. Krenicky. “Monitoring the condition of the spindle of the milling machine using vibration.” MM Science Journal, vol. 2016(11), pp. 1227-1231, 2016. Search in Google Scholar

[12] A. Panda, Š. Olejárová, J. Valíček and M. Harničárová.” Monitoring of the condition of turning machine bearing housing through vibrations.” The International Journal of Advanced Manufacturing Technology, vol. 97(1-4), pp. 401-411, 2018.10.1007/s00170-018-1871-7 Search in Google Scholar

[13] A. Panda, V. Nahornyi, I. Pandová, M. Harničárová, M. Kušnerová, J. Valíček and J. Kmec. “Development of the method for predicting the resource of mechanical systems.” The International Journal of Advanced Manufacturing Technology, vol. 105(1-4), pp. 1563-1571, 2019. Search in Google Scholar

[14] M. Pollák and J. Tkáč. “Enterprise information data management system for small manufacturing company.” TEM Journal – Technology, Education, Management, Informatics, vol. 8(4), pp. 1169-1175, 2019. Search in Google Scholar

[15] J.E.A. Qudeiri, A. Saleh, A. Ziout, A.H.I. Mourad, M.H. Abidi and A. Elkaseer. “Advanced Electric Discharge Machining of Stainless Steels: Assessment of the State of the Art, Gaps and Future Prospect.” Materials, vol. 2019(12), a.no. 907, 2019. Search in Google Scholar

[16] M. Rimár, M. Fedák, A. Kulikov and P. Šmeringai. “Study of gaseous flows in closed area with forced ventilation.” MM Science Journal, vol. 2018(3), pp. 2188-2191, 2018. Search in Google Scholar

[17] P. Shandilya, P.K. Jain and N.K. Jain. “Modelling and process optimisation for wire electric discharge machining of metal matrix composites.” International Journal of Machining and Machinability of Materials, vol. 18, pp. 119-1207, 2016.10.1504/IJMMM.2016.077713 Search in Google Scholar

[18] Ľ. Straka and G. Dittrich. “Influence of tool steel properties on surface quality after electrical discharge machining by wire electrode.” The International Journal of Advanced Manufacturing Technology, vol. 106(5-6), pp. 1617-1632, 2020. Search in Google Scholar

[19] Ľ. Straka, I. Čorný, J. Piteľ and S. Hašová. “Statistical Approach to Optimize the Process Parameters of HAZ of Tool Steel EN X32CrMoV12-28 after Die-Sinking EDM with SFCu Electrode.” Metals, vol. 7(2), pp. 1-22, 2017.10.3390/met7020035 Search in Google Scholar

[20] Ľ. Straka and S. Hašová. “The critical failure determination of the constructional parts of autonomous electroerosion equipment by applying Boolean logic.” Academic Journal of Manufacturing Engineering, vol. 14(2), pp. 80-86, 2016. Search in Google Scholar

[21] Ľ. Straka and G. Dittrich. “Intelligent control system of generated electrical pulses at discharge machining.” Emerging trends in mechatronics, IntechOpen, 26 p., 2020.10.5772/intechopen.88454 Search in Google Scholar

[22] L. Sukhodub, A. Panda, K. Dyadyura, I. Pandová and T. Krenický. “The design criteria for biodegradable magnesium alloy implants.” MM Science Journal, vol. 2018(December), pp. 2673-2679, 2018. Search in Google Scholar

[23] D. Oniszczuk-Swiercz, R. Swiercz, T. Chmielewski and T. Salacinski. “Experimental investigation of influence WEDM parameters on surface roughness and flatness deviation.” Metal 2020, vol. 29, p. 611-617, 2020.10.37904/metal.2020.3567 Search in Google Scholar

[24] D.O. Świercz and R. Świercz. “EDM – analyses of current and voltage waveforms.” Mechanik, vol. 2, pp. 1-3, 2017. Search in Google Scholar

[25] R. Swiercz, and R. Holubek. “Experimental investigation of influence electrical discharge energy on the surface layer properties after EDM.” Welding Technology Review, vol. 92(5), pp. 7-13, 2020.10.26628/wtr.v92i5.1115 Search in Google Scholar

[26] J. Wang, J.A. Sánchez, B. Izquierdo and I. Ayesta. “Experimental and numerical study of crater volume in wire electrical discharge machining.” Materials, vol. 13(3), art. no. 577, 2020.10.3390/ma13030577704067231991856 Search in Google Scholar

[27] M.T. Yan and T.Ch. Lin. “Development of a Pulse Generator for Rough Cutting of Oil-based Micro Wire-EDM.” ISEM XVIII, Procedia CIRP, vol. 42, pp. 709-714, 2016.10.1016/j.procir.2016.02.306 Search in Google Scholar

[28] D. Zhou, Ch. Sun, Y. Zhang and P. Wang. “A noncontact full-field flatness measuring system based on fringe projection.” Proceedings of SPIE, vol. 11439, art.no. 114391B, 2020. Search in Google Scholar

Artículos recomendados de Trend MD

Planifique su conferencia remota con Sciendo