<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Renovation of multi-family residentials, including mainly thermal renovation, which includes adding thermal insulation, contributes to the improvement of living conditions. Above all, it reduces the operating costs of renovated buildings by reducing the consumption of heat energy for central heating. This article discusses the impact of light wet thermal renovation on the temperature distribution in the vertical cross-section of the partition wall and the calculation value of the temperature on the inner surface of the partition wall, as well as on the reduction of thermal energy consumption in buildings. The subject of the research was residentials erected in the large-panel, large- -block, and traditional technology between 1984 and 1994, managed by Łomża Housing Cooperative (ŁSM).</p>
</abstract>

Renovation of multi-family residentials, including mainly thermal renovation, which includes adding thermal insulation, contributes to the improvement of living conditions. Above all, it reduces the operating costs of renovated buildings by reducing the consumption of heat energy for central heating. This article discusses the impact of light wet thermal renovation on the temperature distribution in the vertical cross-section of the partition wall and the calculation value of the temperature on the inner surface of the partition wall, as well as on the reduction of thermal energy consumption in buildings. The subject of the research was residentials erected in the large-panel, large- -block, and traditional technology between 1984 and 1994, managed by Łomża Housing Cooperative (ŁSM).

Impact of thermal renovation on selected characteristics of partition walls and the consumption of heat energy

University of Agriculture in Krakow, Faculty of Production and Power Engineering

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Renovation of multi-family residentials, including mainly thermal renovation, which includes adding thermal insulation, contributes to the improvement of...

Impact of thermal renovation on selected characteristics of partition walls and the consumption of heat energy

Published Online: Nov 09, 2021

Page range: -

Received: Jul 22, 2021

Accepted: Oct 20, 2021

DOI: https://doi.org/10.37705/TechTrans/e2021018

Keywords
thermal renovation, heat transfer coefficient, temperature distribution, thermal protection of buildings

© 2021 Krzysztof Cieśliński et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Impact of thermal renovation on selected characteristics of partition walls and the consumption of heat energy

Published Online: Nov 09, 2021

Page range: -

Received: Jul 22, 2021

Accepted: Oct 20, 2021

DOI: https://doi.org/10.37705/TechTrans/e2021018

Keywordsthermal renovation, heat transfer coefficient, temperature distribution, thermal protection of buildings

© 2021 Krzysztof Cieśliński et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Keywords
thermal renovation, heat transfer coefficient, temperature distribution, thermal protection of buildings