Strength of industrial sandstones modelled with the Discrete Element Method

[1] Abe, S., V. Boros, W. Hancock, and D. Weatherley (2014), ESyS-particle tutorial and user's guide. Version 2.3.1, https://launchpad.net/esys-particle. AbeS. BorosV. HancockW. WeatherleyD. 2014 ESyS-particle tutorial and user's guide Version 2.3.1, https://launchpad.net/esys-particle. Search in Google Scholar

[2] Basu, A., D. A. Mishra, and K. Roychowdhury (2013), Rock failure modes under uniaxial compression, Brazilian, and point load tests, Bull Eng Geol Environ, 72:457–475, DOI 10.1007/s10064-013-0505-4 BasuA. MishraD. A. RoychowdhuryK. 2013 Rock failure modes under uniaxial compression, Brazilian, and point load tests Bull Eng Geol Environ 72 457 475 10.1007/s10064-013-0505-4 Open DOISearch in Google Scholar

[3] Carmona, H.A., F.K. Wittel, F. Kun, and H.J. Herrmann (2008), Fragmentation processes in impact of spheres, Phys. Rev. E 77, 5, 051302, DOI: 10.1103/PhysRevE.77.051302. CarmonaH.A. WittelF.K. KunF. HerrmannH.J. 2008 Fragmentation processes in impact of spheres Phys. Rev. E 77 5 051302 10.1103/PhysRevE.77.051302 18643061 Open DOISearch in Google Scholar

[4] Courtney, T.H. (1990), Mechanical Behavior of Materials, McGraw-Hill, New York. CourtneyT.H. 1990 Mechanical Behavior of Materials McGraw-Hill New York Search in Google Scholar

[5] Cundall, P.A. (1971), A computer model for simulating progressive, large-scale movement in blocky rock systems, Proc. Symp. Int. Soc. Rock Mech. 2, 8. CundallP.A. 1971 A computer model for simulating progressive, large-scale movement in blocky rock systems Proc. Symp. Int. Soc. Rock Mech. 2 8 Search in Google Scholar

[6] Cundall, P.A. (1974), A computer model for rock-mass behavior using interactive graphics for the input and output of geometrical data, National Technical Information Service, Report no. AD/A-001 602. CundallP.A. 1974 A computer model for rock-mass behavior using interactive graphics for the input and output of geometrical data, National Technical Information Service, Report no. AD/A-001 602 Search in Google Scholar

[7] Cundall, P.A., and O.D.L. Strack (1979), A discrete numerical model for granular assemblies, Geotechnique 29, 1, 47–65, DOI: 10.1680/geot.1979.29.1.47. CundallP.A. StrackO.D.L. 1979 A discrete numerical model for granular assemblies Geotechnique 29 1 47 65 10.1680/geot.1979.29.1.47 Open DOISearch in Google Scholar

[8] Do, H. Q., Aragón, A. M., and Schott, D. L. (2017). Automated discrete element method calibration using genetic and optimization algorithms. In EPJ Web of Conferences (Vol. 140). EDP Sciences. https://doi.org/10.1051/epjconf/201714015011. DoH. Q. AragónA. M. SchottD. L. 2017 Automated discrete element method calibration using genetic and optimization algorithms In EPJ Web of Conferences 140 EDP Sciences. https://doi.org/10.1051/epjconf/201714015011. 10.1051/epjconf/201714015011 Search in Google Scholar

[9] Egholm, D.L. (2007), A new strategy for discrete element numerical models: 1. Theory, J. Geophys. Res. 112, B5, B05203, DOI: 10.1029/2006JB004557. EgholmD.L. 2007 A new strategy for discrete element numerical models: 1 Theory, J. Geophys. Res. 112 B5 B05203 10.1029/2006JB004557 Open DOISearch in Google Scholar

[10] Ferdowsi, B. (2014), Discrete element modeling of triggered slip in faults with granular gouge: application to dynamic earthquake triggering, doctoral dissertation FerdowsiB. 2014 Discrete element modeling of triggered slip in faults with granular gouge: application to dynamic earthquake triggering, doctoral dissertation Search in Google Scholar

[11] Fraige, F.Y., and P.A. Langston (2004), Integration schemes and damping algorithms in distinct element models, Adv. Powder Technol. 15, 2, 227–245, DOI: 10.1163/156855204773644454. FraigeF.Y. LangstonP.A. 2004 Integration schemes and damping algorithms in distinct element models Adv. Powder Technol. 15 2 227 245 10.1163/156855204773644454 Open DOISearch in Google Scholar

[12] Griffith, A.A. (1921), The phenomena of rupture and flow in solids, Philosophic. Trans. Roy. Soc. London A, 221, 582–593, DOI: 10.1098/rsta.1921.0006. GriffithA.A. 1921 The phenomena of rupture and flow in solids Philosophic. Trans. Roy. Soc. London A 221 582 593 10.1098/rsta.1921.0006 Open DOISearch in Google Scholar

[13] Hertzberg, R.W. (1976), Deformation and Fracture Mechanics of Engineering Materials, Wiley, New York. HertzbergR.W. 1976 Deformation and Fracture Mechanics of Engineering Materials Wiley New York Search in Google Scholar

[14] Jaeger, J.C., N.G.W. Cook, and R. Zimmerman (2007), Fundamentals of Rock Mechanics, 4th ed., Blackwell Publ., Malden, 488 pp. JaegerJ.C. CookN.G.W. ZimmermanR. 2007 Fundamentals of Rock Mechanics 4th ed. Blackwell Publ. Malden 488 Search in Google Scholar

[15] Kazerani, T. (2013), A discontinuum-based model to simulate compressive and tensile failure in sedimentary rock, J. Rock Mech. Geotech. Eng. 5, 5, 378–388, DOI: 10.1016/j.jrmge.2013.07.002. KazeraniT. 2013 A discontinuum-based model to simulate compressive and tensile failure in sedimentary rock J. Rock Mech. Geotech. Eng. 5 5 378 388 10.1016/j.jrmge.2013.07.002 Open DOISearch in Google Scholar

[16] Klejment P. (2020), The Microscopic Insight into Fracturing of Brittle Materials with the Discrete Element Method (Doctoral Dissertation), Publications of the Institute of Geophysics Polish Academy of Sciences – Geophysical Data Bases, Processing and Instrumentation 427 (A-31), DOI: 10.25171/InstGeoph_PAS_Publs-2020-001 KlejmentP. 2020 The Microscopic Insight into Fracturing of Brittle Materials with the Discrete Element Method (Doctoral Dissertation) Publications of the Institute of Geophysics Polish Academy of Sciences – Geophysical Data Bases, Processing and Instrumentation 427 (A-31), 10.25171/InstGeoph_PAS_Publs-2020-001 Open DOISearch in Google Scholar

[17] Klemm A., D. Wiggins (2016), Sustainability of Construction Materials. Second edition, Woodhead Publishing, Cambridge. KlemmA. WigginsD. 2016 Sustainability of Construction Materials Second edition Woodhead Publishing Cambridge Search in Google Scholar

[18] Li, Y.-G., ed. (2012), Imaging, Modeling and Assimilation in Seismology, De Gruyter, Berlin. LiY.-G. ed. 2012 Imaging, Modeling and Assimilation in Seismology De Gruyter Berlin 10.1515/9783110259032 Search in Google Scholar

[19] Łukaszewski, P. (2003), Development of fracture processes in Silesian Carboniferous sandstones, Geological Quarterly, vol. 47, (1), 29–38. ŁukaszewskiP. 2003 Development of fracture processes in Silesian Carboniferous sandstones Geological Quarterly 47 1 29 38 Search in Google Scholar

[20] Łukaszewski, P. (2013), The deformation of flysch sandstones in a complex state of stress, Wydawnictwo Uniwersytetu Warszawskiego, 221, (in Polish, with English summary). ŁukaszewskiP. 2013 The deformation of flysch sandstones in a complex state of stress Wydawnictwo Uniwersytetu Warszawskiego 221 (in Polish, with English summary). Search in Google Scholar

[21] Mora, P., and D. Place (1993), A lattice solid model for the nonlinear dynamics of earthquakes, Int. J. Modern Phys. C 4, 6, 1059–1074, DOI: 10.1142/S0129183193000823. MoraP. PlaceD. 1993 A lattice solid model for the nonlinear dynamics of earthquakes Int. J. Modern Phys. C 4 6 1059 1074 10.1142/S0129183193000823 Open DOISearch in Google Scholar

[22] Mora, P., and D. Place (1994), Simulation of the frictional stick-slip instability, Pure Appl. Geophys. 143, 61–87, DOI: 10.1007/BF00874324. MoraP. PlaceD. 1994 Simulation of the frictional stick-slip instability Pure Appl. Geophys. 143 61 87 10.1007/BF00874324 Open DOISearch in Google Scholar

[23] Mora, P. and D. Place (2002). “Stress correlation function evolution in lattice solid elasto-dynamic models of shear and fracture zones and earthquake prediction.” Pure and Applied Geophysics, 159(10): 2413–2427. MoraP. PlaceD. 2002 “Stress correlation function evolution in lattice solid elasto-dynamic models of shear and fracture zones and earthquake prediction.” Pure and Applied Geophysics 159 10 2413 2427 10.1007/978-3-0348-8197-5_13 Search in Google Scholar

[24] Munjiza, A. (2004), The Combined Finite-Discrete Element Method, John Wiley & Sons, Chichester. MunjizaA. 2004 The Combined Finite-Discrete Element Method John Wiley & Sons Chichester 10.1002/0470020180 Search in Google Scholar

[25] Nitka, M., and J. Tejchman (2015), Modelling of concrete behaviour in uniaxial compression and tension with DEM, Granular Matter 17, 1, 145–164, DOI: 10.1007/s10035-015-0546-4. NitkaM. TejchmanJ. 2015 Modelling of concrete behaviour in uniaxial compression and tension with DEM Granular Matter 17 1 145 164 10.1007/s10035-015-0546-4 Open DOISearch in Google Scholar

[26] O’Sullivan, C. (2011), Particulate Discrete Element Modelling: A Geomechanics Perspective, Spon Press/Taylor and Francis, London. O’SullivanC. 2011 Particulate Discrete Element Modelling: A Geomechanics Perspective Spon Press/Taylor and Francis London 10.1201/9781482266498 Search in Google Scholar

[27] O’Sullivan, C., and J.D. Bray (2004), Selecting a suitable time step for discrete element simulations that use the central difference time integration scheme, Eng. Comput. 21, 2–4, 278–303, DOI: 10.1108/02644400410519794. O’SullivanC. BrayJ.D. 2004 Selecting a suitable time step for discrete element simulations that use the central difference time integration scheme Eng. Comput. 21 2–4 278 303 10.1108/02644400410519794 Open DOISearch in Google Scholar

[28] Onate, E., and J. Rojek (2004), Combination of discrete element and finite element methods for dynamic analysis of geomechanics problems, Computer Meth. Appl. Mech. Eng. 193, 27–29, 3087–3128, DOI: 10.1016/j.cma.2003.12.056. OnateE. RojekJ. 2004 Combination of discrete element and finite element methods for dynamic analysis of geomechanics problems Computer Meth. Appl. Mech. Eng. 193 27–29 3087 3128 10.1016/j.cma.2003.12.056 Open DOISearch in Google Scholar

[29] Orowan, E. (1949), Fracture and strength of solids, Rep. Prog. Phys. 12, 1, 185–232, DOI: 10.1088/0034-4885/12/1/309. OrowanE. 1949 Fracture and strength of solids Rep. Prog. Phys. 12 1 185 232 10.1088/0034-4885/12/1/309 Open DOISearch in Google Scholar

[30] Potyondy, D.O., and P.A. Cundall (2004), A bonded-particle model for rock, Int. J. Rock Mech. Min. Sci. 41, 8, 1329–1364, DOI: 10.1016/j.ijrmms.2004.09.011. PotyondyD.O. CundallP.A. 2004 A bonded-particle model for rock Int. J. Rock Mech. Min. Sci. 41 8 1329 1364 10.1016/j.ijrmms.2004.09.011 Open DOISearch in Google Scholar

[31] Rojek, J. (2007), Modelowanie i symulacja komputerowa złożonych zagadnień mechaniki nieliniowej metodami elementów skończonych i dyskretnych, Prace IPPT PAN, Warszawa (in Polish). RojekJ. 2007 Modelowanie i symulacja komputerowa złożonych zagadnień mechaniki nieliniowej metodami elementów skończonych i dyskretnych Prace IPPT PAN Warszawa (in Polish) Search in Google Scholar

[32] Sochor, M. (1998), Strength of Materials I, CTU Publishing House, Prague. SochorM. 1998 Strength of Materials I CTU Publishing House Prague Search in Google Scholar

[33] Wang Y., S. Abe, S. Latham and, P. Mora (2006), Implementation of Particle-scale Rotation in the 3-D Lattice Solid Model, Pure and Applied Geophysics 163, 1769–1785, doi 10.1007/s00024-006-0096-0 WangY. AbeS. LathamS. MoraP. 2006 Implementation of Particle-scale Rotation in the 3-D Lattice Solid Model Pure and Applied Geophysics 163 1769 1785 10.1007/s00024-006-0096-0 Open DOISearch in Google Scholar

[34] Wang, Y.C. (2009), A new algorithm to model the dynamics of 3-D bonded rigid bodies with rotations, Acta Geotech. 4, 2, 117–127, DOI: 10.1007/s11440-008-0072-1. WangY.C. 2009 A new algorithm to model the dynamics of 3-D bonded rigid bodies with rotations Acta Geotech. 4 2 117 127 10.1007/s11440-008-0072-1 Open DOISearch in Google Scholar

[35] Wang, Y.C., S. Xue, and J. Xie (2012), Discrete element method and its applications in earthquake and rock fracture modelling. In: Y.-G. Li (ed.) Imaging, Modeling and Assimilation in Seismology, De Gruyter, 235–262. WangY.C. XueS. XieJ. 2012 Discrete element method and its applications in earthquake and rock fracture modelling In: LiY.-G. (ed.) Imaging, Modeling and Assimilation in Seismology De Gruyter 235 262 10.1515/9783110259032.235 Search in Google Scholar

[36] Weatherley, D.K., V.E. Boros, W.R. Hancock, and S. Abe (2010), Scaling benchmark of EsyS-Particle for elastic wave propagation simulations, 2010 IEEE Sixth Int. Conf. e-Science, Brisbane, Australia, 277–283, DOI: 10.1109/eScience.2010.40. WeatherleyD.K. BorosV.E. HancockW.R. AbeS. 2010 Scaling benchmark of EsyS-Particle for elastic wave propagation simulations 2010 IEEE Sixth Int. Conf. e-Science Brisbane, Australia 277 283 10.1109/eScience.2010.40 Open DOISearch in Google Scholar