This work is licensed under the Creative Commons Attribution 4.0 International License.
Abe, S., V. Boros, W. Hancock, and D. Weatherley (2014), ESyS-particle tutorial and user's guide. Version 2.3.1, https://launchpad.net/esys-particle.AbeS.BorosV.HancockW.WeatherleyD.2014Version 2.3.1, https://launchpad.net/esys-particle.Search in Google Scholar
Basu, A., D. A. Mishra, and K. Roychowdhury (2013), Rock failure modes under uniaxial compression, Brazilian, and point load tests, Bull Eng Geol Environ, 72:457–475, DOI 10.1007/s10064-013-0505-4BasuA.MishraD. A.RoychowdhuryK.2013Rock failure modes under uniaxial compression, Brazilian, and point load tests7245747510.1007/s10064-013-0505-4Open DOISearch in Google Scholar
Carmona, H.A., F.K. Wittel, F. Kun, and H.J. Herrmann (2008), Fragmentation processes in impact of spheres, Phys. Rev. E 77, 5, 051302, DOI: 10.1103/PhysRevE.77.051302.CarmonaH.A.WittelF.K.KunF.HerrmannH.J.2008Fragmentation processes in impact of spheres77505130210.1103/PhysRevE.77.05130218643061Open DOISearch in Google Scholar
Courtney, T.H. (1990), Mechanical Behavior of Materials, McGraw-Hill, New York.CourtneyT.H.1990McGraw-HillNew YorkSearch in Google Scholar
Cundall, P.A. (1971), A computer model for simulating progressive, large-scale movement in blocky rock systems, Proc. Symp. Int. Soc. Rock Mech. 2, 8.CundallP.A.1971A computer model for simulating progressive, large-scale movement in blocky rock systems28Search in Google Scholar
Cundall, P.A. (1974), A computer model for rock-mass behavior using interactive graphics for the input and output of geometrical data, National Technical Information Service, Report no. AD/A-001 602.CundallP.A.1974Search in Google Scholar
Cundall, P.A., and O.D.L. Strack (1979), A discrete numerical model for granular assemblies, Geotechnique 29, 1, 47–65, DOI: 10.1680/geot.1979.29.1.47.CundallP.A.StrackO.D.L.1979A discrete numerical model for granular assemblies291476510.1680/geot.1979.29.1.47Open DOISearch in Google Scholar
Do, H. Q., Aragón, A. M., and Schott, D. L. (2017). Automated discrete element method calibration using genetic and optimization algorithms. In EPJ Web of Conferences (Vol. 140). EDP Sciences. https://doi.org/10.1051/epjconf/201714015011.DoH. Q.AragónA. M.SchottD. L.2017InEPJ Web of Conferences140EDP Sciences. https://doi.org/10.1051/epjconf/201714015011.10.1051/epjconf/201714015011Search in Google Scholar
Egholm, D.L. (2007), A new strategy for discrete element numerical models: 1. Theory, J. Geophys. Res. 112, B5, B05203, DOI: 10.1029/2006JB004557.EgholmD.L.2007A new strategy for discrete element numerical models: 1112B5B0520310.1029/2006JB004557Open DOISearch in Google Scholar
Ferdowsi, B. (2014), Discrete element modeling of triggered slip in faults with granular gouge: application to dynamic earthquake triggering, doctoral dissertationFerdowsiB.2014Search in Google Scholar
Fraige, F.Y., and P.A. Langston (2004), Integration schemes and damping algorithms in distinct element models, Adv. Powder Technol. 15, 2, 227–245, DOI: 10.1163/156855204773644454.FraigeF.Y.LangstonP.A.2004Integration schemes and damping algorithms in distinct element models15222724510.1163/156855204773644454Open DOISearch in Google Scholar
Griffith, A.A. (1921), The phenomena of rupture and flow in solids, Philosophic. Trans. Roy. Soc. London A, 221, 582–593, DOI: 10.1098/rsta.1921.0006.GriffithA.A.1921The phenomena of rupture and flow in solids22158259310.1098/rsta.1921.0006Open DOISearch in Google Scholar
Hertzberg, R.W. (1976), Deformation and Fracture Mechanics of Engineering Materials, Wiley, New York.HertzbergR.W.1976WileyNew YorkSearch in Google Scholar
Jaeger, J.C., N.G.W. Cook, and R. Zimmerman (2007), Fundamentals of Rock Mechanics, 4th ed., Blackwell Publ., Malden, 488 pp.JaegerJ.C.CookN.G.W.ZimmermanR.20074th ed.Blackwell Publ.Malden488Search in Google Scholar
Kazerani, T. (2013), A discontinuum-based model to simulate compressive and tensile failure in sedimentary rock, J. Rock Mech. Geotech. Eng. 5, 5, 378–388, DOI: 10.1016/j.jrmge.2013.07.002.KazeraniT.2013A discontinuum-based model to simulate compressive and tensile failure in sedimentary rock5537838810.1016/j.jrmge.2013.07.002Open DOISearch in Google Scholar
Klejment P. (2020), The Microscopic Insight into Fracturing of Brittle Materials with the Discrete Element Method (Doctoral Dissertation), Publications of the Institute of Geophysics Polish Academy of Sciences – Geophysical Data Bases, Processing and Instrumentation 427 (A-31), DOI: 10.25171/InstGeoph_PAS_Publs-2020-001KlejmentP.2020Publications of the Institute of Geophysics Polish Academy of Sciences – Geophysical Data Bases, Processing and Instrumentation 427 (A-31),10.25171/InstGeoph_PAS_Publs-2020-001Open DOISearch in Google Scholar
Klemm A., D. Wiggins (2016), Sustainability of Construction Materials. Second edition, Woodhead Publishing, Cambridge.KlemmA.WigginsD.2016Second editionWoodhead PublishingCambridgeSearch in Google Scholar
Li, Y.-G., ed. (2012), Imaging, Modeling and Assimilation in Seismology, De Gruyter, Berlin.LiY.-G.ed.2012De GruyterBerlin10.1515/9783110259032Search in Google Scholar
Łukaszewski, P. (2003), Development of fracture processes in Silesian Carboniferous sandstones, Geological Quarterly, vol. 47, (1), 29–38.ŁukaszewskiP.2003Development of fracture processes in Silesian Carboniferous sandstones4712938Search in Google Scholar
Łukaszewski, P. (2013), The deformation of flysch sandstones in a complex state of stress, Wydawnictwo Uniwersytetu Warszawskiego, 221, (in Polish, with English summary).ŁukaszewskiP.2013Wydawnictwo Uniwersytetu Warszawskiego221(in Polish, with English summary).Search in Google Scholar
Mora, P., and D. Place (1993), A lattice solid model for the nonlinear dynamics of earthquakes, Int. J. Modern Phys. C 4, 6, 1059–1074, DOI: 10.1142/S0129183193000823.MoraP.PlaceD.1993A lattice solid model for the nonlinear dynamics of earthquakes461059107410.1142/S0129183193000823Open DOISearch in Google Scholar
Mora, P., and D. Place (1994), Simulation of the frictional stick-slip instability, Pure Appl. Geophys. 143, 61–87, DOI: 10.1007/BF00874324.MoraP.PlaceD.1994Simulation of the frictional stick-slip instability143618710.1007/BF00874324Open DOISearch in Google Scholar
Mora, P. and D. Place (2002). “Stress correlation function evolution in lattice solid elasto-dynamic models of shear and fracture zones and earthquake prediction.” Pure and Applied Geophysics, 159(10): 2413–2427.MoraP.PlaceD.2002“Stress correlation function evolution in lattice solid elasto-dynamic models of shear and fracture zones and earthquake prediction.”159102413242710.1007/978-3-0348-8197-5_13Search in Google Scholar
Munjiza, A. (2004), The Combined Finite-Discrete Element Method, John Wiley & Sons, Chichester.MunjizaA.2004John Wiley & SonsChichester10.1002/0470020180Search in Google Scholar
Nitka, M., and J. Tejchman (2015), Modelling of concrete behaviour in uniaxial compression and tension with DEM, Granular Matter 17, 1, 145–164, DOI: 10.1007/s10035-015-0546-4.NitkaM.TejchmanJ.2015Modelling of concrete behaviour in uniaxial compression and tension with DEM17114516410.1007/s10035-015-0546-4Open DOISearch in Google Scholar
O’Sullivan, C. (2011), Particulate Discrete Element Modelling: A Geomechanics Perspective, Spon Press/Taylor and Francis, London.O’SullivanC.2011Spon Press/Taylor and FrancisLondon10.1201/9781482266498Search in Google Scholar
O’Sullivan, C., and J.D. Bray (2004), Selecting a suitable time step for discrete element simulations that use the central difference time integration scheme, Eng. Comput. 21, 2–4, 278–303, DOI: 10.1108/02644400410519794.O’SullivanC.BrayJ.D.2004Selecting a suitable time step for discrete element simulations that use the central difference time integration scheme212–427830310.1108/02644400410519794Open DOISearch in Google Scholar
Onate, E., and J. Rojek (2004), Combination of discrete element and finite element methods for dynamic analysis of geomechanics problems, Computer Meth. Appl. Mech. Eng. 193, 27–29, 3087–3128, DOI: 10.1016/j.cma.2003.12.056.OnateE.RojekJ.2004Combination of discrete element and finite element methods for dynamic analysis of geomechanics problems19327–293087312810.1016/j.cma.2003.12.056Open DOISearch in Google Scholar
Orowan, E. (1949), Fracture and strength of solids, Rep. Prog. Phys. 12, 1, 185–232, DOI: 10.1088/0034-4885/12/1/309.OrowanE.1949Fracture and strength of solids12118523210.1088/0034-4885/12/1/309Open DOISearch in Google Scholar
Potyondy, D.O., and P.A. Cundall (2004), A bonded-particle model for rock, Int. J. Rock Mech. Min. Sci. 41, 8, 1329–1364, DOI: 10.1016/j.ijrmms.2004.09.011.PotyondyD.O.CundallP.A.2004A bonded-particle model for rock4181329136410.1016/j.ijrmms.2004.09.011Open DOISearch in Google Scholar
Rojek, J. (2007), Modelowanie i symulacja komputerowa złożonych zagadnień mechaniki nieliniowej metodami elementów skończonych i dyskretnych, Prace IPPT PAN, Warszawa (in Polish).RojekJ.2007Prace IPPT PANWarszawa (in Polish)Search in Google Scholar
Sochor, M. (1998), Strength of Materials I, CTU Publishing House, Prague.SochorM.1998CTU Publishing HousePragueSearch in Google Scholar
Wang Y., S. Abe, S. Latham and, P. Mora (2006), Implementation of Particle-scale Rotation in the 3-D Lattice Solid Model, Pure and Applied Geophysics 163, 1769–1785, doi 10.1007/s00024-006-0096-0WangY.AbeS.LathamS.MoraP.2006Implementation of Particle-scale Rotation in the 3-D Lattice Solid Model1631769178510.1007/s00024-006-0096-0Open DOISearch in Google Scholar
Wang, Y.C. (2009), A new algorithm to model the dynamics of 3-D bonded rigid bodies with rotations, Acta Geotech. 4, 2, 117–127, DOI: 10.1007/s11440-008-0072-1.WangY.C.2009A new algorithm to model the dynamics of 3-D bonded rigid bodies with rotations4211712710.1007/s11440-008-0072-1Open DOISearch in Google Scholar
Wang, Y.C., S. Xue, and J. Xie (2012), Discrete element method and its applications in earthquake and rock fracture modelling. In: Y.-G. Li (ed.) Imaging, Modeling and Assimilation in Seismology, De Gruyter, 235–262.WangY.C.XueS.XieJ.2012Discrete element method and its applications in earthquake and rock fracture modellingIn:LiY.-G.(ed.)De Gruyter23526210.1515/9783110259032.235Search in Google Scholar
Weatherley, D.K., V.E. Boros, W.R. Hancock, and S. Abe (2010), Scaling benchmark of EsyS-Particle for elastic wave propagation simulations, 2010 IEEE Sixth Int. Conf. e-Science, Brisbane, Australia, 277–283, DOI: 10.1109/eScience.2010.40.WeatherleyD.K.BorosV.E.HancockW.R.AbeS.20102010 IEEE Sixth Int. Conf. e-ScienceBrisbane, Australia27728310.1109/eScience.2010.40Open DOISearch in Google Scholar