Effect of Temperature and Time on Decomposition of δ-ferrite in Austenitic Stainless Steel
, , and
Jul 27, 2020
About this article
Article Category: Original scientific paper
Published Online: Jul 27, 2020
Page range: 65 - 71
Received: Mar 20, 2020
Accepted: May 18, 2020
DOI: https://doi.org/10.2478/rmzmag-2020-0007
Keywords
© 2020 Almaida Gigović-Gekić et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Microstructure of austenitic stainless steel is primarily monophasic, i.e. austenitic. However, precipitation of the δ-ferrite in the austenite matrix is possible depending on the chemical composition of steel. δ-Ferrite is stable on room temperature but it transforms into σ-phase, carbides and austenite during heat treatment. In this work, the results of analysis of influence of temperature and time on decomposition of δ-ferrite are presented. Magnetic induction method, microstructure and hardness analyses were used for testing the degree of decomposition of the δ-ferrite. Analysis of results showed that increase in temperature and time increases the degree of decomposition of δ-ferrite.