Non-destructive Test Methods for Corrosion Detection in Reinforced Concrete Structures

1. Bertolini L, Elsener B, Pedeferri P, Redaelli E & Polder R B: “Corrosion of Steel in Concrete: Prevention, Diagnosis, Repair”, 2^nd Edition. Wiley-VCH Verlag GmbH & Co, 2013.10.1002/9783527651696Search in Google Scholar

2. Broomfield J P: “Corrosion of steel in concrete: understanding, investigation, and repair”. 1. ed. E & FN Spon. xxi, London and New York, 1997, 240 pp.10.4324/9780203414606Search in Google Scholar

3. Elsener B, Andrade C, Gulikers J, Polder R B & Raupach M: “Half-cell potential measurements - Potential mapping on reinforced concrete structures”. Materials and Structures, Vol. 36, No. 261, 2003, pp. 461-471.10.1617/13718Search in Google Scholar

4. ASTM: “ASTM C876 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete”. 2015.Search in Google Scholar

5. Gulikers J & Elsener B: “Development of a calculation procedure for the statistical interpretation of the results of potential mapping performed on reinforced concrete structures”. Materials and Corrosion-Werkstoffe Und Korrosion, Vol. 60, No. 2, 2009, pp. 87-92.10.1002/maco.200805089Search in Google Scholar

6. SIA: “Planung, Durchfuhrung und Interpretation der Potenzialmessung an Stahlbeton (in German)”. Zurich, Switzerland, 2013,Search in Google Scholar

7. Gjørv O E, Vennesland Ø & El-Busaidy A H S: “Electrical Resistivity of Concrete in the Oceans”. Proceedings, 9^th Annual Offshore Technology Conference, Houston, Texas, USAm 1977, pp. 581-588.10.4043/2803-MSSearch in Google Scholar

8. Bertolini L & Polder R B: “Concrete resistivity and reinforcement corrosion rate as a function of temperature and humidity of the environment”. TNO report, TNO Building and Construction Research. The Nethrelands, 1997.Search in Google Scholar

9. Elkey W & Sellevold E J: “Electrical resistivity of concrete”. Norwegian Roads Research Laboratory, Oslo, Norway, 1995.Search in Google Scholar

10. Whiting D A & Nagi M A: “Electrical Resistivity of Concrete - A Literature Review”. R&D Serial No. 2457. Portland Cemente Association: Skokie, Illinois, USA, 2003.Search in Google Scholar

11. Hornbostel K: “The role of concrete resistivity in chloride-induced macro-cell corrosion of reinforcement”. Doctoral Thesis, Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway, 2015.Search in Google Scholar

12. Polder R B: “Test methods for on site measurement of resistivity of concrete - a RILEM TC-154 technical recommendation”. Construction and Building Materials, Vol. 15, No. 2-3, 2001, pp. 125-131.10.1016/S0950-0618(00)00061-1Search in Google Scholar

13. Andrade C, Alonso C, Gulikers J, Polder R B, Cigna R, Vennesland Ø, Salta M, Raharinaivo A & Elsener B: “Rilem TC 154-EMC: Electrochemical techniques for measuring metallic corrosion - Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method”. Materials and Structures, Vol. 37, No. 273, 2004, pp. 623-643.10.1617/13952Search in Google Scholar

14. Elsener B: “Corrosion rate of steel in concrete - Measurements beyond the Tafel law”. Corrosion Science, Vol. 47, No. 12, 2005, pp. 3019-3033.10.1016/j.corsci.2005.06.021Search in Google Scholar

15. Stern M & Geary A L: “Electrochemical polarization. I. A theoretical analysis of the shape of polarization curves.”. Journal of the Electrochemical Society, Vol. 104, No. 1, 1957, pp. 56-63.10.1149/1.2428473Search in Google Scholar

16. Bertolini L, Gastaldi M, Pedeferri M P, Pedeferri P & Pastore T: “Effects of galvanic coupling between carbon steel and stainless steel reinforcement in concrete”. Proceedings, International Conference on Corrosion and Rehabilitation of Reinforced Concrete Structures, Orlando, Florida, USA, 1998.Search in Google Scholar

17. Nygaard P V, Geiker M R & Elsener B: “Corrosion rate of steel in concrete: evaluation of confinement techniques for on-site corrosion rate measurements”. Materials and Structures, Vol. 42, No. 8, 2009, pp. 1059-1076.10.1617/s11527-008-9443-1Search in Google Scholar

18. Raupach M: „Zur chloridinduzierten Makroelementkorrosion von Stahl in Beton”. Vol. Heft 433, Deutscher Ausschuss für Stahlbeton. Beuth Verlag GmbH, Berlin, Germany, 1992. (In German).Search in Google Scholar

19. Jäggi S, Böhni H & Elsener B: “Macrocell corrosion of steel in concrete - experiments and numerical modelling”. In “Corrosion of reinforcement in concrete - mechanisms, monitoring, inhibitors and rehabilitation techniques”. (M Raupach et al., Editors). Woodhead Publishing Limited / CRC Press, 2007, pp. 75-88.10.1533/9781845692285.75Search in Google Scholar

20. Elsener B: “Macrocell corrosion of steel in concrete - implications for corrosion monitoring”. Cement and Concrete Composites, Vol. 24, No. 1, 2002, pp. 65-72.10.1016/S0958-9465(01)00027-0Search in Google Scholar

21. Angst U & Büchler M: “On the applicability of the Stern-Geary relationship to determine instantaneous corrosion rates in macro-cell corrosion”. Materials and Corrosion-Werkstoffe und Korrosion, Vol. doi: 10.1002/maco.201407997, 2014.10.1002/maco.201407997Search in Google Scholar

22. Andrade C & González J A: “Quantitative measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements”. Materials and Corrosion-Werkstoffe und Korrosion, Vol. 29, 1978, pp. 515-519.10.1002/maco.19780290804Search in Google Scholar

23. Andrade C & Alonso C: “Corrosion rate monitoring in the laboratory and on-site”. Construction and Building Materials, Vol. 10, No. 5, 1996, pp. 315-328.10.1016/0950-0618(95)00044-5Search in Google Scholar

24. Tang L & Fu Y: “A rapid technique using handheld instrument for mapping corrosion of steel in reinforced concrete”. Restoration of Buildings and Monuments, Vol. 12 (5-6), 2006, pp. 387-400.10.1515/rbm-2006-6078Search in Google Scholar

25. Tang L & Utgenannt P: “Verification of a rapid technique for corrosion measurement using reinforced concrete slabs after long-term field exposure”. Proceedings, Concrete Platform 2007, Belfast, UK, 2007.Search in Google Scholar

26. Hope B B, Page J A & Ip A K C: “Corrosion Rates of Steel in Concrete”. Cement and Concrete Research, Vol. 16, No. 5, 1986, pp. 771-781.10.1016/0008-8846(86)90051-7Search in Google Scholar

27. Danner T, Revert A B & Gelker M R: “Field station Sandnessjøen. Effect of cracks in concrete after 25 years - Data report”. Norway, 2020,Search in Google Scholar

28. Geiker M, Danner T, Michel A, Belda Revert A, Linderoth O & Hornbostel K: “25 years’ field exposure of pre-cracked concrete beams; combined impact of spacers and cracks on reinforcement corrosion.”. Submitted to Cement and Concrete Research, 2020.10.1016/j.conbuildmat.2021.122801Search in Google Scholar

29. Isaksen H R & Holtmon J P: “Rapport fra produksjon av prøveelementer”. 94-13 BRU Vegvesen, Norway, 1994. (In Norwegian).Search in Google Scholar

30. Liestøl G, Kompen R, Sellevold E J & Isaksen H R: “Resepter og fasthet”. 95-07 BRU Vegvesen, Norway, 1995. (In Norwegian).Search in Google Scholar

31. Officials A A o S H a T. AASHTO T260 Standard method of test for sampling and testing for chloride ion in concrete and concrete raw materials. 2009.Search in Google Scholar

32. Wenner F “A method of measuring earth resistivity”. National Bureau of Standards, Bulletin 12 (4): Washington, USA, 1915, pp. 478-496.10.6028/bulletin.282Search in Google Scholar

33. Angst U M & Elsener B: “On the Applicability of the Wenner Method for Resistivity Measurements of Concrete”. ACI Materials Journal, Vol. 111, No. 6, 2014, pp. 661-672.10.14359/51686831Search in Google Scholar

34. Fahim A, Ghods P, Alizadeh R, Salehi M & Decarufel S: “CEPRA - A new test method for rebar corrosion rate measurement”. STP: Selected Technical Papers, 2017.Search in Google Scholar

35. Elsener B & Bohni H: “Potential Mapping and Corrosion of Steel in Concrete”. In: “Corrosion Rates of Steel tn Concrete, ASTM STP 1065”. (N S Berke, V Chaker & D Whiting, Editors). American Society for Testing and Materials, Philadelphia, USA, 1990, pp. 143-156.Search in Google Scholar

36. Hornbostel K, Larsen C K & Geiker M R: “Relationship between concrete resistivity and corrosion rate - A literature review”. Cement and Concrete Composites, Vol. 39, 2013, pp. 60-72.10.1016/j.cemconcomp.2013.03.019Search in Google Scholar

37. Hornbostel K, Angst U M, Elsener B, Larsen C K & Geiker M R: “Influence of mortar resistivity on the rate-limiting step of chloride-induced macro-cell corrosion of reinforcing steel”. Corrosion Science, Vol. 110, 2016, pp. 46-56.10.1016/j.corsci.2016.04.011Search in Google Scholar

38. Hornbostel K, Elsener B, Angst U M, Larsen C K & Geiker M R: “Limitations of the use of concrete bulk resistivity as an indicator for the rate of chloride-induced macro-cell corrosion”. Structural Concrete, Vol. 18, No. 2, 2017, pp. 326-333.10.1002/suco.201500141Search in Google Scholar