[1. Bertolini L, Elsener B, Pedeferri P, Redaelli E & Polder R B: “Corrosion of Steel in Concrete: Prevention, Diagnosis, Repair”, 2nd Edition. Wiley-VCH Verlag GmbH & Co, 2013.10.1002/9783527651696]Search in Google Scholar
[2. Broomfield J P: “Corrosion of steel in concrete: understanding, investigation, and repair”. 1. ed. E & FN Spon. xxi, London and New York, 1997, 240 pp.10.4324/9780203414606]Search in Google Scholar
[3. Elsener B, Andrade C, Gulikers J, Polder R B & Raupach M: “Half-cell potential measurements - Potential mapping on reinforced concrete structures”. Materials and Structures, Vol. 36, No. 261, 2003, pp. 461-471.10.1617/13718]Search in Google Scholar
[4. ASTM: “ASTM C876 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete”. 2015.]Search in Google Scholar
[5. Gulikers J & Elsener B: “Development of a calculation procedure for the statistical interpretation of the results of potential mapping performed on reinforced concrete structures”. Materials and Corrosion-Werkstoffe Und Korrosion, Vol. 60, No. 2, 2009, pp. 87-92.10.1002/maco.200805089]Search in Google Scholar
[6. SIA: “Planung, Durchfuhrung und Interpretation der Potenzialmessung an Stahlbeton (in German)”. Zurich, Switzerland, 2013,]Search in Google Scholar
[7. Gjørv O E, Vennesland Ø & El-Busaidy A H S: “Electrical Resistivity of Concrete in the Oceans”. Proceedings, 9th Annual Offshore Technology Conference, Houston, Texas, USAm 1977, pp. 581-588.10.4043/2803-MS]Search in Google Scholar
[8. Bertolini L & Polder R B: “Concrete resistivity and reinforcement corrosion rate as a function of temperature and humidity of the environment”. TNO report, TNO Building and Construction Research. The Nethrelands, 1997.]Search in Google Scholar
[9. Elkey W & Sellevold E J: “Electrical resistivity of concrete”. Norwegian Roads Research Laboratory, Oslo, Norway, 1995.]Search in Google Scholar
[10. Whiting D A & Nagi M A: “Electrical Resistivity of Concrete - A Literature Review”. R&D Serial No. 2457. Portland Cemente Association: Skokie, Illinois, USA, 2003.]Search in Google Scholar
[11. Hornbostel K: “The role of concrete resistivity in chloride-induced macro-cell corrosion of reinforcement”. Doctoral Thesis, Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway, 2015.]Search in Google Scholar
[12. Polder R B: “Test methods for on site measurement of resistivity of concrete - a RILEM TC-154 technical recommendation”. Construction and Building Materials, Vol. 15, No. 2-3, 2001, pp. 125-131.10.1016/S0950-0618(00)00061-1]Search in Google Scholar
[13. Andrade C, Alonso C, Gulikers J, Polder R B, Cigna R, Vennesland Ø, Salta M, Raharinaivo A & Elsener B: “Rilem TC 154-EMC: Electrochemical techniques for measuring metallic corrosion - Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method”. Materials and Structures, Vol. 37, No. 273, 2004, pp. 623-643.10.1617/13952]Search in Google Scholar
[14. Elsener B: “Corrosion rate of steel in concrete - Measurements beyond the Tafel law”. Corrosion Science, Vol. 47, No. 12, 2005, pp. 3019-3033.10.1016/j.corsci.2005.06.021]Search in Google Scholar
[15. Stern M & Geary A L: “Electrochemical polarization. I. A theoretical analysis of the shape of polarization curves.”. Journal of the Electrochemical Society, Vol. 104, No. 1, 1957, pp. 56-63.10.1149/1.2428473]Search in Google Scholar
[16. Bertolini L, Gastaldi M, Pedeferri M P, Pedeferri P & Pastore T: “Effects of galvanic coupling between carbon steel and stainless steel reinforcement in concrete”. Proceedings, International Conference on Corrosion and Rehabilitation of Reinforced Concrete Structures, Orlando, Florida, USA, 1998.]Search in Google Scholar
[17. Nygaard P V, Geiker M R & Elsener B: “Corrosion rate of steel in concrete: evaluation of confinement techniques for on-site corrosion rate measurements”. Materials and Structures, Vol. 42, No. 8, 2009, pp. 1059-1076.10.1617/s11527-008-9443-1]Search in Google Scholar
[18. Raupach M: „Zur chloridinduzierten Makroelementkorrosion von Stahl in Beton”. Vol. Heft 433, Deutscher Ausschuss für Stahlbeton. Beuth Verlag GmbH, Berlin, Germany, 1992. (In German).]Search in Google Scholar
[19. Jäggi S, Böhni H & Elsener B: “Macrocell corrosion of steel in concrete - experiments and numerical modelling”. In “Corrosion of reinforcement in concrete - mechanisms, monitoring, inhibitors and rehabilitation techniques”. (M Raupach et al., Editors). Woodhead Publishing Limited / CRC Press, 2007, pp. 75-88.10.1533/9781845692285.75]Search in Google Scholar
[20. Elsener B: “Macrocell corrosion of steel in concrete - implications for corrosion monitoring”. Cement and Concrete Composites, Vol. 24, No. 1, 2002, pp. 65-72.10.1016/S0958-9465(01)00027-0]Search in Google Scholar
[21. Angst U & Büchler M: “On the applicability of the Stern-Geary relationship to determine instantaneous corrosion rates in macro-cell corrosion”. Materials and Corrosion-Werkstoffe und Korrosion, Vol. doi: 10.1002/maco.201407997, 2014.10.1002/maco.201407997]Search in Google Scholar
[22. Andrade C & González J A: “Quantitative measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements”. Materials and Corrosion-Werkstoffe und Korrosion, Vol. 29, 1978, pp. 515-519.10.1002/maco.19780290804]Search in Google Scholar
[23. Andrade C & Alonso C: “Corrosion rate monitoring in the laboratory and on-site”. Construction and Building Materials, Vol. 10, No. 5, 1996, pp. 315-328.10.1016/0950-0618(95)00044-5]Search in Google Scholar
[24. Tang L & Fu Y: “A rapid technique using handheld instrument for mapping corrosion of steel in reinforced concrete”. Restoration of Buildings and Monuments, Vol. 12 (5-6), 2006, pp. 387-400.10.1515/rbm-2006-6078]Search in Google Scholar
[25. Tang L & Utgenannt P: “Verification of a rapid technique for corrosion measurement using reinforced concrete slabs after long-term field exposure”. Proceedings, Concrete Platform 2007, Belfast, UK, 2007.]Search in Google Scholar
[26. Hope B B, Page J A & Ip A K C: “Corrosion Rates of Steel in Concrete”. Cement and Concrete Research, Vol. 16, No. 5, 1986, pp. 771-781.10.1016/0008-8846(86)90051-7]Search in Google Scholar
[27. Danner T, Revert A B & Gelker M R: “Field station Sandnessjøen. Effect of cracks in concrete after 25 years - Data report”. Norway, 2020,]Search in Google Scholar
[28. Geiker M, Danner T, Michel A, Belda Revert A, Linderoth O & Hornbostel K: “25 years’ field exposure of pre-cracked concrete beams; combined impact of spacers and cracks on reinforcement corrosion.”. Submitted to Cement and Concrete Research, 2020.10.1016/j.conbuildmat.2021.122801]Search in Google Scholar
[29. Isaksen H R & Holtmon J P: “Rapport fra produksjon av prøveelementer”. 94-13 BRU Vegvesen, Norway, 1994. (In Norwegian).]Search in Google Scholar
[30. Liestøl G, Kompen R, Sellevold E J & Isaksen H R: “Resepter og fasthet”. 95-07 BRU Vegvesen, Norway, 1995. (In Norwegian).]Search in Google Scholar
[31. Officials A A o S H a T. AASHTO T260 Standard method of test for sampling and testing for chloride ion in concrete and concrete raw materials. 2009.]Search in Google Scholar
[32. Wenner F “A method of measuring earth resistivity”. National Bureau of Standards, Bulletin 12 (4): Washington, USA, 1915, pp. 478-496.10.6028/bulletin.282]Search in Google Scholar
[33. Angst U M & Elsener B: “On the Applicability of the Wenner Method for Resistivity Measurements of Concrete”. ACI Materials Journal, Vol. 111, No. 6, 2014, pp. 661-672.10.14359/51686831]Search in Google Scholar
[34. Fahim A, Ghods P, Alizadeh R, Salehi M & Decarufel S: “CEPRA - A new test method for rebar corrosion rate measurement”. STP: Selected Technical Papers, 2017.]Search in Google Scholar
[35. Elsener B & Bohni H: “Potential Mapping and Corrosion of Steel in Concrete”. In: “Corrosion Rates of Steel tn Concrete, ASTM STP 1065”. (N S Berke, V Chaker & D Whiting, Editors). American Society for Testing and Materials, Philadelphia, USA, 1990, pp. 143-156.]Search in Google Scholar
[36. Hornbostel K, Larsen C K & Geiker M R: “Relationship between concrete resistivity and corrosion rate - A literature review”. Cement and Concrete Composites, Vol. 39, 2013, pp. 60-72.10.1016/j.cemconcomp.2013.03.019]Search in Google Scholar
[37. Hornbostel K, Angst U M, Elsener B, Larsen C K & Geiker M R: “Influence of mortar resistivity on the rate-limiting step of chloride-induced macro-cell corrosion of reinforcing steel”. Corrosion Science, Vol. 110, 2016, pp. 46-56.10.1016/j.corsci.2016.04.011]Search in Google Scholar
[38. Hornbostel K, Elsener B, Angst U M, Larsen C K & Geiker M R: “Limitations of the use of concrete bulk resistivity as an indicator for the rate of chloride-induced macro-cell corrosion”. Structural Concrete, Vol. 18, No. 2, 2017, pp. 326-333.10.1002/suco.201500141]Search in Google Scholar