This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Yi XS’ Du S, Zhang L, editors. Composite materials engineering. Volume 1, Fundamentals of composite materials. Beijing: Springer; Chemical Industry Press Singapore, 2018.YiXS’DuSZhangL, editors. .Beijing: Springer; Chemical Industry PressSingapore, 2018.Search in Google Scholar
Olaleye K, Roik T, Kurzawa A, Gavrysh O, Vit-siuk I, Jamroziak K. Structure formation in antifriction composites with a nickel matrix and its effect on properties. Materials. 2022;15(9):3404. doi: 10.3390/ ma15093404OlaleyeKRoikTKurzawaAGavryshOVit-siukIJamroziakK.Structure formation in antifriction composites with a nickel matrix and its effect on properties. .2022;15(9):3404. doi: 10.3390/ma15093404Open DOISearch in Google Scholar
Cheng J, Zhen J, Zhu S, Yang J, Ma J, Li W, et al. Friction and wear behavior of Ni-based solid-lubricating composites at high temperature in a vacuum environment. Mater Des. 2017;122:405-13. doi: 10.1016/ j.matdes.2017.03.030ChengJZhenJZhuSYangJMaJLiWFriction and wear behavior of Ni-based solid-lubricating composites at high temperature in a vacuum environment. .2017;122:405-13. doi: 10.1016/j.matdes.2017.03.030Open DOISearch in Google Scholar
Neale MJ. Tribology Handbook. 2nd edition. Butterworth-Heinemann: Elsevier Ltd.; 1996.NealeMJ..2nd edition. Butterworth-Heinemann: Elsevier Ltd.; 1996.Search in Google Scholar
Samal PK, Newkirk JW, editors. Powder metallurgy. Vol. 7. New York: ASM International; 2015.SamalPKNewkirkJW, editors. .7. New York: ASM International; 2015.Search in Google Scholar
Jamroziak K, Roik T. Structure and properties of the new antifriction composite materials for high-temperature friction units. In: Abdel-Wahab M, editor. Proceedings of the 7thInternational Conference on Fracture Fatigue and Wear. Singapore: Springer Singapore; 2019. p. 628-37.JamroziakKRoikT.. In: Abdel-WahabM, editor. Proceedings of the 7th International Conference on Fracture Fatigue and Wear. Singapore: Springer Singapore; 2019. p. 628-37.Search in Google Scholar
Attaei M, Calado LM, Taryba MG, Morozov Y, Shakoor RA, Kahraman R, et al. Autonomous selfhealing in epoxy coatings provided by high efficiency isophorone diisocyanate (IPDI) microcapsules for protection of carbon steel. Prog Org Coatings. 2020;139:105445. doi: 10.1016/j.porgcoat.2019.105445AttaeiMCaladoLMTarybaMGMorozovYShakoorRAKahramanRAutonomous selfhealing in epoxy coatings provided by high efficiency isophorone diisocyanate (IPDI) microcapsules for protection of carbon steel. .2020;139:105445. doi: 10.1016/j.porgcoat.2019.105445Open DOISearch in Google Scholar
Dangsheng X. Lubrication behavior of Ni-Cr-based alloys containing MoS2 at high temperature. Wear. 2001;251(1):1094-9. doi: 10.1016/S0043-1648(01)00 803-1DangshengX.Lubrication behavior of Ni-Cr-based alloys containing MoS2 at high temperature. .2001;251(1):1094-9. doi: 10.1016/S0043-1648(01)00803-1Open DOISearch in Google Scholar
Zhu S, Cheng J, Qiao Z, Yang J. High temperature solid-lubricating materials: a review. Tribol Int. 2019 May;133:206-23. doi: 10.1016/j.triboint.2018.12.037ZhuSChengJQiaoZYangJ.High temperature solid-lubricating materials: a review. .2019May;133:206-23. doi: 10.1016/j.triboint.2018.12.037Open DOISearch in Google Scholar
Adamov AA, Kamenskikh AA, Pankova AP. Influence analysis of the antifriction layer materials and thickness on the contact interaction of spherical bearings elements. Lubricants. 2022;10(2):1-13. doi: 10.3390/lubri-cants10020030AdamovAAKamenskikhAAPankovaAP.Influence analysis of the antifriction layer materials and thickness on the contact interaction of spherical bearings elements. . 2022;10(2):1-13. doi: 10.3390/lubri-cants10020030Open DOISearch in Google Scholar
Wu G, Xu C, Xiao G, Yi M, Chen Z. Structure design of Al2 O3/TiC/CaF2 multicomponent gradient self-lubricating ceramic composite and its tribological behaviors. Ceram Int. 2018;44(5):5550-63. doi: 10. 1016/j.ceramint.2017.12.199WuGXuCXiaoGYiMChenZ.Structure design of Al2 O3/TiC/CaF2 multicomponent gradient self-lubricating ceramic composite and its tribological behaviors. .2018;44(5):5550-63. doi: 10.1016/j.ceramint.2017.12.199Open DOISearch in Google Scholar
Mohan S, Anand A, Arvind Singh R, Jayalak-shmi S, Chen X, Konovalov S. Friction and wear study of Fe-Cu-C-CaF2 self-lubricating composite at high speed and high temperature. IOP Conf Ser Mater Sci Eng. 2020;834(1):012010. doi: 10.1088/1757-899X/834/1/012010MohanSAnandAArvind SinghRJayalak-shmiSChenXKonovalovS.. IOP Conf Ser Mater Sci Eng.2020;834(1):012010. doi: 10.1088/1757-899X/834/1/012010Open DOISearch in Google Scholar
Fangyi Zhai BH, Mi G. Effect of MoS2 content on anti-friction and wear-resistance of nickel-based alloy cladding layer. Ferroelectrics. 2023;607(1):117-25. doi: 10.1080/00150193.2023.2198379Fangyi ZhaiBHMiG.Effect of MoS2 content on anti-friction and wear-resistance of nickel-based alloy cladding layer. . 2023;607(1):117-25. doi: 10.1080/00150193.2023.2198379Open DOISearch in Google Scholar
Ramesh CS, Keshavamurthy R, Channabasappa BH, Pramod S. Friction and wear behavior of Ni-P coated Si3N4 reinforced Al6061 composites. Tribol Int. 2010;43(3):623-34. doi: 10.1016/j.triboint.2009.0 9.011RameshCSKeshavamurthyRChannabasappaBHPramodS.Friction and wear behavior of Ni-P coated Si3N4 reinforced Al6061 composites. .2010;43(3):623-34. doi: 10.1016/j.triboint.2009.09.011Open DOISearch in Google Scholar
Buketov AV, Brailo M, Sapronov OO, Kruglyj DG, Appazov ES, Dulebova L, et al. Nanofilled antifriction polymeric composite materials for parts of friction unitsof sea and river transport. J Nano-Electron Phys. 2020;l2(5):l-6. doi: 10.21272/jnep.12(5).05025BuketovAVBrailoMSapronovOOKruglyjDGAppazovESDulebovaLNanofilled antifriction polymeric composite materials for parts of friction units of sea and river transport. .2020;12(5):1-6. doi: 10.21272/jnep.12(5).05025Open DOISearch in Google Scholar
Lu Y, Yang X, Yang X, Xiao R, Wang P. Research of anti-friction performance of Ni60 alloy coating optimized by multiple high aluminum bronze. J Funct Mater. 2016;47(1):1097-101. doi: 10.3969/j.issn.1001-9731.2016.01.020LuYYangXYangXXiaoRWangP.Research of anti-friction performance of Ni60 alloy coating optimized by multiple high aluminum bronze. .2016;47(1):1097-101. doi: 10.3969/j.issn.1001-9731.2016.01.020Open DOISearch in Google Scholar
Changchuan W, Wang R, Peng C, Feng Y, Wei X. Effects of hBN surface plated nickel on properties of Ni-20Cr/hBN self-lubricating composites. Chinese J Mater Res. 2011;25(5):509-16.ChangchuanWWangRPengCFengYWeiX.Effects of hBN surface plated nickel on properties of Ni-20Cr/hBN self-lubricating composites. .2011;25(5):509-16.Search in Google Scholar
Bin C, Tan Y, Tang J, Tan H, Wang W. Research on friction and wear properties of CaF2/TiC/Ni-base alloy composite coatings at different temperatures. Acta Armamentarii. 2014;35(6):900-7. doi: 10.3969/j.issn. 1000-1093.2014.06.022BinCTanYTangJTanHWangW.Research on friction and wear properties of CaF2/TiC/Ni-base alloy composite coatings at different temperatures. .2014;35(6):900-7. doi: 10.3969/j.issn.1000-1093.2014.06.022Open DOISearch in Google Scholar
Shekhar C, Wani MF, Seghal R. Fabrication and self-lubricating tribological characterisation of Cu-Ni/ TiC/CaF2 composite for railway switch slide baseplate. Wear 2023 August 15;526:204890. doi: 10.1016/j.wear. 2023.204890ShekharCWaniMFSeghalR.Fabrication and self-lubricating tribological characterisation of Cu-Ni/ TiC/CaF2 composite for railway switch slide baseplate. 2023Augustl5;526:204890. doi: 10.1016/j.wear.2023.204890Open DOISearch in Google Scholar
Roik TA, Vitsiuk I, Gavrysh OA. Wear resistant composite material based on nickel. Patent of Ukraine; 135075, 2019. p. 4.RoikTAVitsiukIGavryshOA.Wear resistant composite material based on nickel. ; 135075, 2019. p. 4.Search in Google Scholar
Tang S, Wang R, Liu P, Niu Q, Yang G, Liu W, et al. Preparation of WC-TiC-Ni3Al-CaF2 functionally graded self-lubricating tool material by microwave sintering and its cutting performance. High Temp Mater Process. 2020;39:45-53. doi: 10.1515/htmp-2020-0004TangSWangRLiuPNiuQYangGLiuWPreparation of WC-TiC-Ni3Al-CaF2 functionally graded self-lubricating tool material by microwave sintering and its cutting performance. .2020;39:45-53. doi: 10.1515/htmp-2020-0004Open DOISearch in Google Scholar
Guo N, Chen Z, Xiao G, Li Q, Zhang S, Yi M, et al. Cutting performance and wear resistance of Al2O3/ TiC/CaF2@Al2O3 ceramic tools in dry machining of hardened steel. J Ceram Soc Japan. 2021;129(12):697-706. doi: 10.2109/jcersj2.21123GuoNChenZXiaoGLiQZhangSYiMCutting performance and wear resistance of Al2O3/ TiC/CaF2@Al2O3 ceramic tools in dry machining of hardened steel. .2021;129(12):697-706. doi: 10.2109/jcersj2.21123Open DOISearch in Google Scholar
Ji L, Chen Z, Guo R, Xu C, Guo N. Preparia-tion of nano-coating powder CaF2@ Al(OH)3 and its application in Al2O3/Ti(C,N) self-lubricating ceramic tool materials. Ceram Int. 2020;46:15949-57. doi: 10.1016/j.ceraint.2020.03.144JiLChenZGuoRXuCGuoN.Preparia-tion of nano-coating powder CaF2@ Al(OH)3 and its application in Al2O3/Ti(C,N) self-lubricating ceramic tool materials. .2020;46:15949-57. doi: 10.1016/j.ceraint.2020.03.144Open DOISearch in Google Scholar
Zhang Y, Chromik RR. Tribology of self-lubricating metal matrix composites. In: L. Menezes, K. Rohatgi, Omranie E, editors. Self-lubricating composites monograph. Berlin: Springer Nature; 2018. p. 33-73.ZhangYChromikRR.Tribology of self-lubricating metal matrix composites. In: MenezesL.RohatgiK.OmranieE, editors. .Berlin: Springer Nature; 2018. p. 33-73.Search in Google Scholar
Cai B, Tan Y, Tu Y, Wang X, Tan H. Tribological properties of Ni-base alloy composite coating modified by both graphite and TiC particles. Trans Nonferrous Met Soc China. 2011;21(11):2426-32. doi: 10.1016/S1003-6326(11)61031-5CaiBTanYTuYWangXTanH.Tribological properties of Ni-base alloy composite coating modified by both graphite and TiC particles. .2011;21(11):2426-32. doi: 10.1016/S1003-6326(11)61031-5Open DOISearch in Google Scholar
Li JL, Xiong DS. Tribological properties of nickel-based self-lubricating composite at elevated temperature and counterface material selection. Wear 2008 Jul 3l;265(3-4):533-9. doi: 10.1016/j.wear.2007.09.005LiJLXiongDS.Tribological properties of nickel-based self-lubricating composite at elevated temperature and counterface material selection. 2008Jul3l;265(3-4):533-9. doi: 10.1016/j.wear.2007.09.005Open DOISearch in Google Scholar
Kotkowiak M, Piasecki A, Kulka M. The influence of solid lubricant on tribological properties of sintered Ni-20%CaF2 composite material. Ceram Int. 2019. doi: 10.1016/j.ceramint.2019.05.262KotkowiakMPiaseckiAKulkaM.The influence of solid lubricant on tribological properties of sintered Ni-20%CaF2 composite material. .2019. doi: 10.1016/j.ceramint.2019.05.262Open DOISearch in Google Scholar
Naim Katea S, Tai CW, Ström P, Larsson PO, Vidarsson H, Westin G. Niobium carbide-Nickelniobium alloy composites from a nickel coated powder: microstructural development during sintering. Open Ceram. 2021;6:100096. doi: 10.1016/j.oceram.2021. 100096Naim KateaSTaiCWStrömPLarssonPOVidarssonHWestinG.Niobium carbide-Nickelniobium alloy composites from a nickel coated powder: microstructural development during sintering. .2021;6:100096. doi: 10.1016/j.oceram.2021.100096Open DOISearch in Google Scholar
Kruzhanov VS. Modern manufacturing of powder-metallurgical products with high density and performance by press-sinter technology. Powder Metal Met Ceram. 2018;57(7):43l-46. doi: 10.1007/s11106-018-0002-1KruzhanovVS.Modern manufacturing of powder-metallurgical products with high density and performance by press-sinter technology. .2018;57(7):431-46. doi: 10.1007/s11106-018-0002-1Open DOISearch in Google Scholar
Ogbonna VE, Popoola PI, Popoola OM, Adeosun SO. A review on recent advances on improving polyimide matrix nanocomposites for mechanical, thermal, and tribological applications: challenges and recommendations for future improvement. J Thermoplast Compos Mater. 2023;36(2):836-65. doi: 10.1177/08927057211007904OgbonnaVEPopoolaPIPopoolaOMAdeosunSO.A review on recent advances on improving polyimide matrix nanocomposites for mechanical, thermal, and tribological applications: challenges and recommendations for future improvement. .2023;36(2):836-65. doi: 10.1177/08927057211007904Open DOISearch in Google Scholar
Ji Z, Zhang L, Xie G, Xu W, Guo D, Luo J, et al. Mechanical and tribological properties of nanocomposites incorporated with two-dimensional materials. Friction. 2020;8(5):813-46. doi: 10.1007/s40544-020-0401-4JiZZhangLXieGXuWGuoDLuoJMechanical and tribological properties of nanocomposites incorporated with two-dimensional materials. .2020;8(5):8l3-46. doi: 10.1007/s40544-020-0401-4Open DOISearch in Google Scholar
Atkinson HV, Davies S. Fundamental aspects of hot isostatic pressing: an overview. Metal Mater TransA. 2000;31(12):2981-3000. doi: 10.1007/s11661-000-0078-2AtkinsonHVDaviesS.Fundamental aspects of hot isostatic pressing: an overview. .2000;31(12):2981-3000. doi: 10.1007/s11661-000-0078-2Open DOISearch in Google Scholar
Dempster I, Wallis R. Heat treatment metallurgy of nickel-base alloys. In: George E. Totten, editor. Heat treating of nonferrous alloys. 4th ed. ASM International; 2016. p. 399-425.DempsterIWallisR.Heat treatment metallurgy of nickel-base alloys. In: TottenGeorge E., editor. .4th ed. ASM International; 2016. p. 399-425.Search in Google Scholar
Kluczyfiski J, Sniezek L, Grzelak K, Oziêbło A, Perkowski K, Torzewski J, et al. Hot isostatic pressing influence on the mechanical properties of selectively laser-melted 316L steel. Bull Polish Acad Sci Tech Sci. 2020;68(6):1413-24. doi: 10.24425/bpasts.2020. 135396KluczyfiskiJSniezekLGrzelakKOziêbłoAPerkowskiKTorzewskiJHot isostatic pressing influence on the mechanical properties of selectively laser-melted 316L steel. .2020;68(6):1413-24. doi: 10.24425/bpasts.2020.135396Open DOISearch in Google Scholar
Sniezek L, Kosturek R, Wachowski M, Kania B. Microstructure and residual stresses of AA2519 friction stir welded joints under different heat treatment conditions. Materials. 2020;13(4):834. doi: 10.3390/ma1304 0834SniezekLKosturekRWachowskiMKaniaB.Microstructure and residual stresses of AA2519 friction stir welded joints under different heat treatment conditions. .2020;13(4):834. doi: 10.3390/ma13040834Open DOISearch in Google Scholar
Li Y, Zhu W, Li Q, Qiu S, Zhang J. Phase equilibria in the Nb-Ti side of the Nb-Si-Ti system at l2OO°C and its oxidation behavior. J Alloys Compd. 2017;704:311-21. doi: 10.1016/j.jallcom.2017.02.007LiYZhuWLiQQiuSZhangJ.Phase equilibria in the Nb-Ti side of the Nb-Si-Ti system at 1200°C and its oxidation behavior. .2017;704:311-21. doi: 10.1016/j.jallcom.2017.02.007Open DOISearch in Google Scholar