This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Dwivedi DK. Surface engineering: Enhancing life of tribological components. Springer; 2018.DwivediDKSpringer201810.1007/978-81-322-3779-2Search in Google Scholar
Heimann RB. Plasma-spray coating: Principles and applications. 2nd ed. John Wiley & Sons; 2008.HeimannRB2nd ed.John Wiley & Sons2008Search in Google Scholar
Pawłowski L. The science and engineering of thermal spray coatings. 2nd ed. John Wiley & Sons; 2008PawłowskiL2nd ed.John Wiley & Sons200810.1002/9780470754085Search in Google Scholar
Donadei V, Koivoluoto H, Sarlin E, Vuoristo P. Lubricated icephobic coatings prepared by flame spraying with hybrid feedstock injection. Surf Coat Tech. 2020;403:126396. https://doi.org/10.1016/j.surfcoat.2020.126396.DonadeiVKoivoluotoHSarlinEVuoristoPLubricated icephobic coatings prepared by flame spraying with hybrid feedstock injection2020403126396. https://doi.org/10.1016/j.surfcoat.2020.126396.10.1016/j.surfcoat.2020.126396Search in Google Scholar
Czupryński A. Flame spraying of aluminum coatings reinforced with particles of carbonaceous materials as an alternative for laser cladding technologies. Materials. 2019;12:3467. https://doi.org/10.3390/ma12213467.CzupryńskiAFlame spraying of aluminum coatings reinforced with particles of carbonaceous materials as an alternative for laser cladding technologies2019123467https://doi.org/10.3390/ma12213467.10.3390/ma12213467686193731652697Search in Google Scholar
Devaraj S, McDonald A, Chandra S. Metallization of porous polyethylene using a wire-arc spray process for heat transfer applications. J Therm Spray Techn. 2021;30:145–56. https://doi.org/10.1007/s11666-020-01119-1.DevarajSMcDonaldAChandraSMetallization of porous polyethylene using a wire-arc spray process for heat transfer applications20213014556https://doi.org/10.1007/s11666-020-01119-1.10.1007/s11666-020-01119-1Search in Google Scholar
Chmielewski T, Siwek P, Chmielewski M, Piątkowska A, Grabias A, Golański D. Structure and selected properties of arc sprayed coatings containing in-situ fabricated Fe-Al intermetallic phases. Metals. 2018;8:1059. https://doi.org/10.3390/met8121059.ChmielewskiTSiwekPChmielewskiMPiątkowskaAGrabiasAGolańskiDStructure and selected properties of arc sprayed coatings containing in-situ fabricated Fe-Al intermetallic phases201881059https://doi.org/10.3390/met8121059.10.3390/met8121059Search in Google Scholar
de la Roche J, Alvarado-Orozco JM, Gomez PA, Cano IG, Dosta S, Toro A. Hot corrosion behavior of dense CYSZ/YSZ bilayer coatings deposited by atmospheric plasma spray in Na2SO4 + V2O5 molten salts. Surf Coat Tech. 2022;432:128066. https://doi.org/10.1016/j.surfcoat.2021.128066.de la RocheJAlvarado-OrozcoJMGomezPACanoIGDostaSToroAHot corrosion behavior of dense CYSZ/YSZ bilayer coatings deposited by atmospheric plasma spray in Na2SO4 + V2O5 molten salts2022432128066. https://doi.org/10.1016/j.surfcoat.2021.128066.10.1016/j.surfcoat.2021.128066Search in Google Scholar
Łatka L, Michalak M, Szala M, Walczak M, Sokołowski P, Ambroziak A. Influence of 13 wt% TiO2 content in alumina-titania powders on microstructure, sliding wear and cavitation erosion resistance of APS sprayed coatings. Surf Coat Tech. 2021;410:126979. https://doi.org/10.1016/j.surfcoat.2021.126979.ŁatkaLMichalakMSzalaMWalczakMSokołowskiPAmbroziakAInfluence of 13 wt% TiO2 content in alumina-titania powders on microstructure, sliding wear and cavitation erosion resistance of APS sprayed coatings2021410126979. https://doi.org/10.1016/j.surfcoat.2021.126979.10.1016/j.surfcoat.2021.126979Search in Google Scholar
Huang C, Arseenko M, Zhao L, Xie Y, Elsenberg A, Li W, et al. Property prediction and crack growth behavior in cold sprayed Cu deposits. Mater Design. 2021;206:109826. https://doi.org/10.1016/j.matdes.2021.109826.HuangCArseenkoMZhaoLXieYElsenbergALiWProperty prediction and crack growth behavior in cold sprayed Cu deposits2021206109826. https://doi.org/10.1016/j.matdes.2021.109826.10.1016/j.matdes.2021.109826Search in Google Scholar
Winnicki M, Gibas A, Baszczuk A, Jasiorski M. Low pressure cold spraying of TiO2 on acrylonitrile butadiene styrene (ABS). Surf Coat Tech. 2021;406:126717. https://doi.org/10.1016/j.surfcoat.2020.126717.WinnickiMGibasABaszczukAJasiorskiMLow pressure cold spraying of TiO2 on acrylonitrile butadiene styrene (ABS)2021406126717. https://doi.org/10.1016/j.surfcoat.2020.126717.10.1016/j.surfcoat.2020.126717Search in Google Scholar
Singh V, Singh I, Bansal A, Omer A, Singla AK, Rampal A, Goyal DK. Cavitation erosion behavior of high velocity oxy fuel (HVOF) sprayed (VC + CuNi-Cr) based novel coatings on SS316 steel. Surf Coat Tech. 2022;432:128052. https://doi.org/10.1016/j.surfcoat.2021.128052.SinghVSinghIBansalAOmerASinglaAKRampalAGoyalDKCavitation erosion behavior of high velocity oxy fuel (HVOF) sprayed (VC + CuNi-Cr) based novel coatings on SS316 steel2022432128052https://doi.org/10.1016/j.surfcoat.2021.128052.10.1016/j.surfcoat.2021.128052Search in Google Scholar
Praveen AS, Arjunan A. High-temperature oxidation and erosion of HVOF sprayed NiCrSiB/Al2O3 and NiCrSiB/WC–Co coatings. Appl Sur Sci Adv. 2022;7:100191. https://doi.org/10.1016/j.apsadv.2021.100191.PraveenASArjunanAHigh-temperature oxidation and erosion of HVOF sprayed NiCrSiB/Al2O3 and NiCrSiB/WC–Co coatings20227100191. https://doi.org/10.1016/j.apsadv.2021.100191.10.1016/j.apsadv.2021.100191Search in Google Scholar
Fauchais PL, Heberlein JVR, Boulos MI. Thermal spray fundamentals, from powder to part. Springer; 2014.FauchaisPLHeberleinJVRBoulosMISpringer201410.1007/978-0-387-68991-3Search in Google Scholar
Lima RS, Marple BR. Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: A review. J Therm Spray Techn. 2007;16:40–63. https://doi.org/10.1007/s11666-006-9010-7.LimaRSMarpleBRThermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: A review2007164063https://doi.org/10.1007/s11666-006-9010-7.10.1007/s11666-006-9010-7Search in Google Scholar
Picas JA, Forn A, Matthaus G. HVOF coatings as an alternative to hard chrome for pistons and valves. Wear. 2006;261:477–84. https://doi.org/10.1016/j.wear.2005.12.005.PicasJAFornAMatthausGHVOF coatings as an alternative to hard chrome for pistons and valves200626147784https://doi.org/10.1016/j.wear.2005.12.005.10.1016/j.wear.2005.12.005Search in Google Scholar
Kiilakoski J, Langlade C, Koivuluoto H, Vuoristo P. Characterizing the micro-impact fatigue behavior of APS and HVOF sprayed ceramic coatings. Surf Coat Tech. 2019;371:245–54. https://doi.org/10.1016/j.surfcoat.2018.10.097.KiilakoskiJLangladeCKoivuluotoHVuoristoPCharacterizing the micro-impact fatigue behavior of APS and HVOF sprayed ceramic coatings201937124554https://doi.org/10.1016/j.surfcoat.2018.10.097.10.1016/j.surfcoat.2018.10.097Search in Google Scholar
Mousavi SE, Naghshehkesh N, Amirnejad M, Shammakhi H, Sonboli A. Wear and corrosion properties of stellite-6 coating fabricated by HVOF on nickel–aluminium bronze substrate. Met Mater Int. 2020;27:3269–81. https://doi.org/10.1007/s12540-020-00697-7.MousaviSENaghshehkeshNAmirnejadMShammakhiHSonboliAWear and corrosion properties of stellite-6 coating fabricated by HVOF on nickel–aluminium bronze substrate202027326981https://doi.org/10.1007/s12540-020-00697-7.10.1007/s12540-020-00697-7Search in Google Scholar
Qiao L, Wu Y, Hong S, Long W, Cheng J. Wet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying. Ceram Int. 2021;47:1829–36. https://doi.org/10.1016/j.ceramint.2020.09.009.QiaoLWuYHongSLongWChengJWet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying202147182936https://doi.org/10.1016/j.ceramint.2020.09.009.10.1016/j.ceramint.2020.09.009Search in Google Scholar
Jackson L, Ivosevic M, Knight R, Cairncross RA. Sliding wear properties of HVOF thermally sprayed nylon-11 and nylon-11/ceramic composites on steel. J Therm Spray Technol. 2007;16:927–32. https://doi.org/10.1007/s11666-007-9088-6.JacksonLIvosevicMKnightRCairncrossRASliding wear properties of HVOF thermally sprayed nylon-11 and nylon-11/ceramic composites on steel20071692732https://doi.org/10.1007/s11666-007-9088-6.10.1007/s11666-007-9088-6Search in Google Scholar
Houdkova S, Zahalka F, Kasparova M, Berger L-M. Comparative study of thermally sprayed coatings under different types of wear conditions for hard chromium replacement. Tribol Lett. 2011;43:139–54. https://doi.org/10.1007/s11249-011-9791-9.HoudkovaSZahalkaFKasparovaMBergerL-MComparative study of thermally sprayed coatings under different types of wear conditions for hard chromium replacement20114313954https://doi.org/10.1007/s11249-011-9791-9.10.1007/s11249-011-9791-9Search in Google Scholar
Krelling AP, de Souza MM, da Costa CE, Giubilei Milan JC. HVOF-sprayed coating over AISI 4140 steel for hard chromium replacement. Mater Res. 2018;21:e20180138. https://doi.org/10.1590/1980-5373-MR-2018-0138.KrellingAPde SouzaMMda CostaCEGiubilei MilanJCHVOF-sprayed coating over AISI 4140 steel for hard chromium replacement201821e20180138https://doi.org/10.1590/1980-5373-MR-2018-0138.10.1590/1980-5373-mr-2018-0138Search in Google Scholar
Berger L-M. Application of hardmetals as thermal spray coatings. Int J Refract Hard Met. 2015;49:350–64. https://doi.org/10.1016/j.ijrmhm.2014.09.029.BergerL-MApplication of hardmetals as thermal spray coatings20154935064https://doi.org/10.1016/j.ijrmhm.2014.09.029.10.1016/j.ijrmhm.2014.09.029Search in Google Scholar
Ma N, Guo L, Cheng Z, Wu H, Ye F, Zhang K. Improvement on mechanical properties and wear resistance of HVOF sprayed WC-12Co coatings by optimizing feedstock structure. Appl Surf Sci. 2014;320:364–71. https://doi.org/10.1016/j.apsusc.2014.09.081.MaNGuoLChengZWuHYeFZhangKImprovement on mechanical properties and wear resistance of HVOF sprayed WC-12Co coatings by optimizing feedstock structure201432036471https://doi.org/10.1016/j.apsusc.2014.09.081.10.1016/j.apsusc.2014.09.081Search in Google Scholar
Chen H, Gou GQ, Tu MJ, Liu Y. Structure and wear behaviour of nanostructured and ultrafine HVOF spraying WC-17Co coatings. Surface Eng. 2009;25:502–6. https://doi.org/10.1179/026708408X329489.ChenHGouGQTuMJLiuYStructure and wear behaviour of nanostructured and ultrafine HVOF spraying WC-17Co coatings2009255026https://doi.org/10.1179/026708408X329489.10.1179/026708408X329489Search in Google Scholar
Ward LP, Pilkington A. The dry sliding wear behavior of HVOF-sprayed WC: Metal composite coatings. J Mater Eng Perform. 2014;23:3266–78. https://doi.org/10.1007/s11665-014-1122-5.WardLPPilkingtonAThe dry sliding wear behavior of HVOF-sprayed WC: Metal composite coatings201423326678https://doi.org/10.1007/s11665-014-1122-5.10.1007/s11665-014-1122-5Search in Google Scholar
Murthy JKN, Venkataraman B. Abrasive wear behaviour of WC-CoCr and Cr3C2-20(NiCr) deposited by HVOF and detonation spray processes. Surf Coat Tech. 2006;200:2642–52. https://doi.org/10.1016/j.surfcoat.2004.10.136.MurthyJKNVenkataramanBAbrasive wear behaviour of WC-CoCr and Cr3C2-20(NiCr) deposited by HVOF and detonation spray processes2006200264252https://doi.org/10.1016/j.surfcoat.2004.10.136.10.1016/j.surfcoat.2004.10.136Search in Google Scholar
Fang W, Cho TY, Yoon JH, Song KO, Hur SK, Youn SJ, et al. Processing optimization, surface properties and wear behavior of HVOF spraying WC–CrC–Ni coating. J Mater Process Tech. 2009;209:3561–7. https://doi.org/10.1016/j.jmatprotec.2008.08.024.FangWChoTYYoonJHSongKOHurSKYounSJProcessing optimization, surface properties and wear behavior of HVOF spraying WC–CrC–Ni coating200920935617https://doi.org/10.1016/j.jmatprotec.2008.08.024.10.1016/j.jmatprotec.2008.08.024Search in Google Scholar
Bang SS, Park YC, Lee JW, Hyun SK, Kim TB, Lee JK, et al. Effect of the spray distance on the properties of high velocity oxygen-fuel (HVOF) sprayed WC-12Co coatings. J Nanosci Nanotechnol. 2018;18:1931–4. https://doi.org/10.1166/jnn.2018.14990.BangSSParkYCLeeJWHyunSKKimTBLeeJKEffect of the spray distance on the properties of high velocity oxygen-fuel (HVOF) sprayed WC-12Co coatings20181819314https://doi.org/10.1166/jnn.2018.14990.10.1166/jnn.2018.1499029448686Search in Google Scholar
Hong S, Wu Y, Zheng Y, Wang B, Gao W, Li G, et al. Effect of spray parameters on the corrosion behavior of HVOF sprayed WC-Co-Cr coatings. J Mater Eng Perform. 2014;23:1434–9. https://doi.org/10.1007/s11665-014-0865-3.HongSWuYZhengYWangBGaoWLiGEffect of spray parameters on the corrosion behavior of HVOF sprayed WC-Co-Cr coatings20142314349https://doi.org/10.1007/s11665-014-0865-3.10.1007/s11665-014-0865-3Search in Google Scholar
Lee L, Kim S. Influence of thermally sprayed WC-Co-Cr coatings on the corrosion characteristics of Ni-Al bronze alloy. Int J Electrochem Sci. 2021;16:210769. https://doi.org/10.20964/2021.07.40.LeeLKimSInfluence of thermally sprayed WC-Co-Cr coatings on the corrosion characteristics of Ni-Al bronze alloy202116210769. https://doi.org/10.20964/2021.07.40.10.20964/2021.07.40Search in Google Scholar
Gui M, Eybel R, Asselin B, Radhakrishnan S, Cerps J. Influence of processing parameters on residual stress of high velocity oxy-fuel thermally sprayed WC-Co-Cr coating. J Mater Eng Perform. 2012;21:2090–8. https://doi.org/10.1007/s11665-012-0134-2.GuiMEybelRAsselinBRadhakrishnanSCerpsJInfluence of processing parameters on residual stress of high velocity oxy-fuel thermally sprayed WC-Co-Cr coating20122120908https://doi.org/10.1007/s11665-012-0134-2.10.1007/s11665-012-0134-2Search in Google Scholar
Jonda E, Łatka L. Comparative analysis of mechanical properties of WC-based cermet coatings sprayed by HVOF onto AZ31 magnesium alloy substrates. Adv Sci Technol Res J. 2021;15:57–64. https://doi.org/10.12913/22998624/135979.JondaEŁatkaLComparative analysis of mechanical properties of WC-based cermet coatings sprayed by HVOF onto AZ31 magnesium alloy substrates2021155764https://doi.org/10.12913/22998624/135979.10.12913/22998624/135979Search in Google Scholar
Oliver WC, Pharr GM. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7:1564–83. https://doi.org/10.1557/JMR.1992.1564.OliverWCPharrGMAn improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments19927156483https://doi.org/10.1557/JMR.1992.1564.10.1557/JMR.1992.1564Search in Google Scholar
Łatka L, Chicot D, Cattini A, Pawłowski L, Ambroziak A. Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings. Surf Coat Technol. 2013;220:131–9. https://doi.org/10.1016/j.surfcoat.2012.07.025.ŁatkaLChicotDCattiniAPawłowskiLAmbroziakAModeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings20132201319https://doi.org/10.1016/j.surfcoat.2012.07.025.10.1016/j.surfcoat.2012.07.025Search in Google Scholar
Lancaster JK. The influence of substrate hardness on the formation and endurance of molybdenum disulphide films. Wear. 1967;10:103–17. https://doi.org/10.1016/0043-1648(67)90082-8.LancasterJKThe influence of substrate hardness on the formation and endurance of molybdenum disulphide films19671010317https://doi.org/10.1016/0043-1648(67)90082-8.10.1016/0043-1648(67)90082-8Search in Google Scholar
Aguero A, Camon F, Garcıa de Blas J, del Hoyo JC, Muelas R, Santaballa A, et al. HVOF-deposited WCCoCr as replacement for hard Cr in landing gear actuators. J Therm Spray Techn. 2011;20:1292–309. https://doi.org/10.1007/s11666-011-9686-1.AgueroACamonFGarcıa de BlasJdel HoyoJCMuelasRSantaballaAHVOF-deposited WCCoCr as replacement for hard Cr in landing gear actuators2011201292309https://doi.org/10.1007/s11666-011-9686-1.10.1007/s11666-011-9686-1Search in Google Scholar
Ding X, Ke D, Yuan C, Ding Z, Cheng X. Microstructure and cavitation erosion resistance of HVOF deposited WC-Co coatings with different sized WC. Coatings. 2018;8:307. https://doi.org/10.3390/coatings8090307.DingXKeDYuanCDingZChengXMicrostructure and cavitation erosion resistance of HVOF deposited WC-Co coatings with different sized WC20188307https://doi.org/10.3390/coatings8090307.10.3390/coatings8090307Search in Google Scholar
Hong S, Wu Y, Wang B, Lin J. Improvement in tribological properties of Cr12MoV coldWork die steel by HVOF sprayed WC-Co-Cr cermet coatings. Coatings. 2019;9:825. https://doi.org/10.3390/coatings9120825.HongSWuYWangBLinJImprovement in tribological properties of Cr12MoV coldWork die steel by HVOF sprayed WC-Co-Cr cermet coatings20199825https://doi.org/10.3390/coatings9120825.10.3390/coatings9120825Search in Google Scholar
Wang H, Qiu Q, Gee M, Hou C, Liu X, Song X. Wear resistance enhancement of HVOF-sprayed WC-Co coating by complete densification of starting powder. Mater Des. 2020;191:108586. https://doi.org/10.1016/j.matdes.2020.108586.WangHQiuQGeeMHouCLiuXSongXWear resistance enhancement of HVOF-sprayed WC-Co coating by complete densification of starting powder2020191108586. https://doi.org/10.1016/j.matdes.2020.108586.10.1016/j.matdes.2020.108586Search in Google Scholar
Song B, Murray JW, Wellman RG, Pala Z, Hussain T. Dry sliding wear behaviour of HVOF thermal sprayed WC-Co-Cr and WC-CrxCy-Ni coatings. Wear. 2020;442–443:203114. https://doi.org/10.1016/j.wear.2019.203114.SongBMurrayJWWellmanRGPalaZHussainTDry sliding wear behaviour of HVOF thermal sprayed WC-Co-Cr and WC-CrxCy-Ni coatings2020442–443203114. https://doi.org/10.1016/j.wear.2019.203114.10.1016/j.wear.2019.203114Search in Google Scholar
Zhan S-H, Cho T-Y, Yoon J-H, Li M-X, Shum PW, Kwon S-C. Investigation on microstructure, surface properties and anti-wear performance of HVOF sprayed WC-Cr-Ni coatings modified by laser heat treatment. Mater Sci Eng B. 2009;162:127–34. https://doi.org/10.1016/j.mseb.2009.03.017.ZhanS-HChoT-YYoonJ-HLiM-XShumPWKwonS-CInvestigation on microstructure, surface properties and anti-wear performance of HVOF sprayed WC-Cr-Ni coatings modified by laser heat treatment200916212734https://doi.org/10.1016/j.mseb.2009.03.017.10.1016/j.mseb.2009.03.017Search in Google Scholar
Yao H-L, Yang C, Yi D-L, Zhang M-X, Wang H-T, Chen Q-Y, et al. Microstructure and mechanical property of high velocity oxy-fuel sprayed WC-Cr3C2-Ni coatings. Surf Coat Tech. 2020;397:126010. https://doi.org/10.1016/j.surfcoat.2020.126010.YaoH-LYangCYiD-LZhangM-XWangH-TChenQ-YMicrostructure and mechanical property of high velocity oxy-fuel sprayed WC-Cr3C2-Ni coatings2020397126010. https://doi.org/10.1016/j.surfcoat.2020.126010.10.1016/j.surfcoat.2020.126010Search in Google Scholar
Murugan K, Ragupathy A, Balasubramanian V, Sridhar K. Optimizing HVOF spray process parameters to attain minimum porosity and maximum hardness in WC-10Co-4Cr coatings. Surf Coat Tech. 2014;247:90–102. https://doi.org/10.1016/j.surfcoat.2014.03.022.MuruganKRagupathyABalasubramanianVSridharKOptimizing HVOF spray process parameters to attain minimum porosity and maximum hardness in WC-10Co-4Cr coatings201424790102https://doi.org/10.1016/j.surfcoat.2014.03.022.10.1016/j.surfcoat.2014.03.022Search in Google Scholar
Myalska H, Lusvarghi L, Bolelli G, Sassatelli P, Moskal G. Tribological behavior of WC-Co HVAF-sprayed composite coatings modified by nano-sized TiC addition. Surf Coat Tech. 2019;371:401–16. https://doi.org/10.1016/j.surfcoat.2018.09.017.MyalskaHLusvarghiLBolelliGSassatelliPMoskalGTribological behavior of WC-Co HVAF-sprayed composite coatings modified by nano-sized TiC addition201937140116https://doi.org/10.1016/j.surfcoat.2018.09.017.10.1016/j.surfcoat.2018.09.017Search in Google Scholar
Mateen A, Saha GC, Khan TI, Khalid F. Tribological behavior of HVOF sprayed near-nanostructured and microstructured WC-17wt.%Co coatings. Surf Coat Tech. 2011;206:1077–84. https://doi.org/10.1016/j.surfcoat.2011.07.075.MateenASahaGCKhanTIKhalidFTribological behavior of HVOF sprayed near-nanostructured and microstructured WC-17wt.%Co coatings2011206107784https://doi.org/10.1016/j.surfcoat.2011.07.075.10.1016/j.surfcoat.2011.07.075Search in Google Scholar
Karimi A, Verdon Ch, Barbezat G. Microstructure and hydroabrasive wear behaviour of high velocity oxy-fuel thermally sprayed WC-Co(Cr) coatings. Surf Coat Tech. 1993;57:81–9. https://doi.org/10.1016/0257-8972(93)90340-T.KarimiAVerdonChBarbezatGMicrostructure and hydroabrasive wear behaviour of high velocity oxy-fuel thermally sprayed WC-Co(Cr) coatings199357819https://doi.org/10.1016/0257-8972(93)90340-T.10.1016/0257-8972(93)90340-TSearch in Google Scholar
Bartuli C, Valente T, Cipri F, Bemporad E, Tului M. Parametric study of an HVOF process for the deposition of nanostructured WC-Co coatings. J Therm Spray Techn. 2005;14:187–95. https://doi.org/10.1361/10599630523746.BartuliCValenteTCipriFBemporadETuluiMParametric study of an HVOF process for the deposition of nanostructured WC-Co coatings20051418795https://doi.org/10.1361/10599630523746.10.1361/10599630523746Search in Google Scholar
Picas JA, Ruperez E, Punset M, Forn A. Influence of HVOF spraying parameters on the corrosion resistance of WC–CoCr coatings in strong acidic environment. Surf Coat Tech. 2013;225:47–57. https://doi.org/10.1016/j.surfcoat.2013.03.015.PicasJARuperezEPunsetMFornAInfluence of HVOF spraying parameters on the corrosion resistance of WC–CoCr coatings in strong acidic environment20132254757https://doi.org/10.1016/j.surfcoat.2013.03.015.10.1016/j.surfcoat.2013.03.015Search in Google Scholar
Bolelli G, Berger L-M, Borner T, Koivuluoto H, Lusvarghi L, Lyphout C, et al. Tribology of HVOF- and HVAF-sprayed WC–10Co4Cr hardmetal coatings: A comparative assessment. Surf Coat Tech. 2015;265:125–44. https://doi.org/10.1016/j.surfcoat.2015.01.048.BolelliGBergerL-MBornerTKoivuluotoHLusvarghiLLyphoutCTribology of HVOF- and HVAF-sprayed WC–10Co4Cr hardmetal coatings: A comparative assessment201526512544https://doi.org/10.1016/j.surfcoat.2015.01.048.10.1016/j.surfcoat.2015.01.048Search in Google Scholar
Bolelli G, Berger L-M, Bonetti M, Lusvarghi L. Comparative study of the dry sliding wear behaviour of HVOF-sprayed WC–(W,Cr)2C–Ni and WC–CoCr hard metal coatings. Wear. 2014;309:96–111. https://doi.org/10.1016/j.wear.2013.11.001.BolelliGBergerL-MBonettiMLusvarghiLComparative study of the dry sliding wear behaviour of HVOF-sprayed WC–(W,Cr)2C–Ni and WC–CoCr hard metal coatings201430996111https://doi.org/10.1016/j.wear.2013.11.001.10.1016/j.wear.2013.11.001Search in Google Scholar
Matikainen V, Peregrina SR, Ojala N, Koivuluoto H, Schubert J, Houdkova S, et al. Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes. Surf Coat Tech. 2019;370:196–212. https://doi.org/10.1016/j.surfcoat.2019.04.067.MatikainenVPeregrinaSROjalaNKoivuluotoHSchubertJHoudkovaSErosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes2019370196212https://doi.org/10.1016/j.surfcoat.2019.04.067.10.1016/j.surfcoat.2019.04.067Search in Google Scholar
Santana YY, La J, Barbera-Sosa G, Caro J, Puchi-Cabrera ES, Staia MH. Mechanical properties and microstructure of WC–10Co–4Cr and WC–12Co thermal spray coatings deposited by HVOF. Surf Eng. 2008;24:374–82. https://doi.org/10.1179/174329408X326380.SantanaYYLaJBarbera-SosaGCaroJPuchi-CabreraESStaiaMHMechanical properties and microstructure of WC–10Co–4Cr and WC–12Co thermal spray coatings deposited by HVOF20082437482https://doi.org/10.1179/174329408X326380.10.1179/174329408X326380Search in Google Scholar
Ang A, Berndt CC. A review of testing methods for thermal spray coatings. Int Mater Rev. 2014;59:179–223. https://doi.org/10.1179/1743280414Y.0000000029.AngABerndtCCA review of testing methods for thermal spray coatings201459179223https://doi.org/10.1179/1743280414Y.0000000029.10.1179/1743280414Y.0000000029Search in Google Scholar
Garfias Bulnes A, Albaladejo Fuentes V, Garcia Cano I, Dosta S. Understanding the influence of high velocity thermal spray techniques on the properties of different anti-wear WC-based coatings. Coatings. 2020;10:1157. https://doi.org/10.3390/coatings10121157.Garfias BulnesAAlbaladejo FuentesVGarcia CanoIDostaSUnderstanding the influence of high velocity thermal spray techniques on the properties of different anti-wear WC-based coatings2020101157https://doi.org/10.3390/coatings10121157.10.3390/coatings10121157Search in Google Scholar
Wesmann JAR, Kuroda S, Espallargas N. The role of oxide tribofilms on friction and wear of different thermally sprayed WC-CoCr. J Therm Spray Technol. 2017;26:492–502. https://doi.org/10.1007/s11666-017-0522-0.WesmannJARKurodaSEspallargasNThe role of oxide tribofilms on friction and wear of different thermally sprayed WC-CoCr201726492502https://doi.org/10.1007/s11666-017-0522-0.10.1007/s11666-017-0522-0Search in Google Scholar
Xie M, Zhang S, Li M. Comparative investigation on HVOF sprayed Carbide-based coatings. Appl Surf Sci. 2013;273:799–805. https://doi.org/10.1016/j.apsusc.2013.03.010.XieMZhangSLiMComparative investigation on HVOF sprayed Carbide-based coatings2013273799805https://doi.org/10.1016/j.apsusc.2013.03.010.10.1016/j.apsusc.2013.03.010Search in Google Scholar
Wang H, Wang X, Song X, Liu XX, Liu XX. Sliding wear behavior of nanostructured WC-Co-Cr coatings. Appl Surf Sci. 2015;355:453–60 https://doi.org/10.1016/j.apsusc.2015.07.144.WangHWangXSongXLiuXXLiuXXSliding wear behavior of nanostructured WC-Co-Cr coatings201535545360https://doi.org/10.1016/j.apsusc.2015.07.144.10.1016/j.apsusc.2015.07.144Search in Google Scholar
Federeci M, Menapace C, Moscatelli A, Gialanella S, Straffelini G. Pin-on-disc study of a friction material dry sliding against HVOF coated discs at room temperature and 300°C. Tribol Int. 2017;115:89–99. https://doi.org/10.1016/j.triboint.2017.05.030.FedereciMMenapaceCMoscatelliAGialanellaSStraffeliniGPin-on-disc study of a friction material dry sliding against HVOF coated discs at room temperature and 300°C20171158999https://doi.org/10.1016/j.triboint.2017.05.030.10.1016/j.triboint.2017.05.030Search in Google Scholar
Bhosale DG, Rathod WS. Tribological behaviour of atmospheric plasma and high velocity oxy-fuel sprayed WC-Cr3C2-Ni coatings at elevated temperatures. Ceram Int. 2020;46:12373–85. https://doi.org/10.1016/j.ceramint.2020.01.288.BhosaleDGRathodWSTribological behaviour of atmospheric plasma and high velocity oxy-fuel sprayed WC-Cr3C2-Ni coatings at elevated temperatures2020461237385https://doi.org/10.1016/j.ceramint.2020.01.288.10.1016/j.ceramint.2020.01.288Search in Google Scholar