X-Ray Diffraction Measurements for Inconel 718 Alloy Elements Created by Incremental Methods

Amato, K.N., Gaytan, S.M., Murr, L.E., Martinez, E., Shindo, P.W., Hernandez, J., Collins, S., Medina, F. (2012). Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting. Acta Materialia, 60(5), 2229–2239. https://doi.org/10.1016/j.actamat.2011.12.032 Amato K.N. Gaytan S.M. Murr L.E. Martinez E. Shindo P.W. Hernandez J. Collins S. Medina F . ( 2012 ). Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting . Acta Materialia , 60 ( 5 ), 2229 – 2239 . https://doi.org/ 10.1016/j.actamat.2011.12.032 Open DOISearch in Google Scholar

Ardila, L.C., Garciandia, F., González-Díaz, J.B., Álvarez, P., Echeverria, A., Petite, M.M., Deffley, R., Ochoa, J. (2014). Effect of IN718 Recycled Powder Reuse on Properties of Parts Manufactured by Means of Selective Laser Melting. Physics Procedia, 56, 99–107. https://doi.org/10.1016/j.phpro.2014.08.152 Ardila L.C. Garciandia F. González-Díaz J.B. Álvarez P. Echeverria A. Petite M.M. Deffley R. Ochoa J . ( 2014 ). Effect of IN718 Recycled Powder Reuse on Properties of Parts Manufactured by Means of Selective Laser Melting . Physics Procedia , 56 , 99 – 107 . https://doi.org/ 10.1016/j.phpro.2014.08.152 Open DOISearch in Google Scholar

Blackwell, P. L. (2005). The mechanical and microstructural characteristics of laser-deposited IN718. Journal of Materials Processing Technology, 170(1), 240–246. https://doi.org/10.1016/j.jmatprotec.2005.05.005 Blackwell P. L. ( 2005 ). The mechanical and microstructural characteristics of laser-deposited IN718 . Journal of Materials Processing Technology , 170 ( 1 ), 240 – 246 . https://doi.org/ 10.1016/j.jmatprotec.2005.05.005 Open DOISearch in Google Scholar

Burke, M. G., & Miller, M. K. (1991). Precipitation in Alloy 718: A combined AEM and APFIM Investigation. In E.A. Loria (Ed), Superalloys 718, 625 and Various Derivatives (pp. 337–350). TMS. https://doi.org/10.7449/1991/Superalloys_1991_337_350 Burke M. G. & Miller M. K. ( 1991 ). Precipitation in Alloy 718: A combined AEM and APFIM Investigation . In Loria E.A. (Ed), Superalloys 718, 625 and Various Derivatives (pp. 337 – 350 ). TMS . https://doi.org/ 10.7449/1991/Superalloys_1991_337_350 Open DOISearch in Google Scholar

Ezugwu, E. O. (2004). High speed machining of aero-engine alloys. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 26(1), 1–11. https://doi.org/10.1590/S1678-58782004000100001 Ezugwu E. O. ( 2004 ). High speed machining of aero-engine alloys . Journal of the Brazilian Society of Mechanical Sciences and Engineering , 26 ( 1 ), 1 – 11 . https://doi.org/ 10.1590/S1678-58782004000100001 Open DOISearch in Google Scholar

Ferreri, N. C., Vogel, S. C., & Knezevic, M. (2020). Determining volume fractions of γ, γ′, γ″, δ, and MC-carbide phases in Inconel 718 as a function of its processing history using an advanced neutron diffraction procedure. Materials Science and Engineering: A, 781, 139228. https://doi.org/10.1016/j.msea.2020.139228 Ferreri N. C. Vogel S. C. & Knezevic M . ( 2020 ). Determining volume fractions of γ, γ′, γ″, δ, and MC-carbide phases in Inconel 718 as a function of its processing history using an advanced neutron diffraction procedure . Materials Science and Engineering: A , 781 , 139228 . https://doi.org/ 10.1016/j.msea.2020.139228 Open DOISearch in Google Scholar

Gadalińska, E., Michałowski, A., & Czarnewicz, S. (2019). Determination of Stress Values in the Surface Layer of Inconel 718 Samples Dedicated to Fatigue Tests. Fatigue of Aircraft Structures, 2019(11), 78–86. https://doi.org/10.2478/fas-2019-0008 Gadalińska E. Michałowski A. & Czarnewicz S . ( 2019 ). Determination of Stress Values in the Surface Layer of Inconel 718 Samples Dedicated to Fatigue Tests . Fatigue of Aircraft Structures , 2019 ( 11 ), 78 – 86 . https://doi.org/ 10.2478/fas-2019-0008 Open DOISearch in Google Scholar

Ghorbanpour, S., Deshmukh, K, Sahu, S., Riemslag, T., Reinton, E., Borisov, E., Popovich, A., Bertolo, V., Jiang, Q., Sanchez, M. T., Knezevic, M., & Popovich, V. (2022). Additive manufacturing of functionally graded inconel 718: Effect of heat treatment and building orientation on microstructure and fatigue behaviour. Journal of Materials Processing Technology, 306, 117573. https://doi.org/10.1016/j.jmatprotec.2022.117573 Ghorbanpour S. Deshmukh K Sahu S. Riemslag T. Reinton E. Borisov E. Popovich A. Bertolo V. Jiang Q. Sanchez M. T. Knezevic M. & Popovich V . ( 2022 ). Additive manufacturing of functionally graded inconel 718: Effect of heat treatment and building orientation on microstructure and fatigue behaviour . Journal of Materials Processing Technology , 306 , 117573 . https://doi.org/ 10.1016/j.jmatprotec.2022.117573 Open DOISearch in Google Scholar

Gribbin, S., Ghorbanpour, S., Ferreri, N. C., Bicknell, J., Tsukrov, I., & Knezevic, M. (2019). Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures. Materials Characterization, 149, 184–197. https://doi.org/10.1016/j.matchar.2019.01.028 Gribbin S. Ghorbanpour S. Ferreri N. C. Bicknell J. Tsukrov I. & Knezevic M . ( 2019 ). Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures . Materials Characterization , 149 , 184 – 197 . https://doi.org/ 10.1016/j.matchar.2019.01.028 Open DOISearch in Google Scholar

Hilley, M. E. (Ed.). (1971). Residual stress measurement by X-ray diffraction-SAE J784a. Society of Automotive Engineers. Hilley M. E. (Ed.). ( 1971 ). Residual stress measurement by X-ray diffraction-SAE J784a . Society of Automotive Engineers . Search in Google Scholar

Hönnige, J., Seow, C.E., Ganguly, S., Xu, X., Cabeza, S., Coules, H., & Williams, S. (2021). Study of residual stress and microstructural evolution in as-deposited and inter-pass rolled wire plus arc additively manufactured Inconel 718 alloy after ageing treatment. Materials Science and Engineering: A, 801, 140368. https://doi.org/10.1016/j.msea.2020.140368 Hönnige J. Seow C.E. Ganguly S. Xu X. Cabeza S. Coules H. & Williams S . ( 2021 ). Study of residual stress and microstructural evolution in as-deposited and inter-pass rolled wire plus arc additively manufactured Inconel 718 alloy after ageing treatment . Materials Science and Engineering: A , 801 , 140368 . https://doi.org/ 10.1016/j.msea.2020.140368 Open DOISearch in Google Scholar

Hosseini, E., & Popovich, V. A. (2019). A review of mechanical properties of additively manufactured Inconel 718. Additive Manufacturing, 30, 100877. https://doi.org/10.1016/j.addma.2019.100877 Hosseini E. & Popovich V. A. ( 2019 ). A review of mechanical properties of additively manufactured Inconel 718 . Additive Manufacturing , 30 , 100877 . https://doi.org/ 10.1016/j.addma.2019.100877 Open DOISearch in Google Scholar

Huang, X., Chaturvedi, M. C., & Richards, N. L. (1996). Effect of homogenization heat treatment on the microstructure and heat-affected zone microfissuring in welded cast alloy 718. Metallurgical and Materials Transactions A, 27(3), 785–790. https://doi.org/10.1007/BF02648966 Huang X. Chaturvedi M. C. & Richards N. L. ( 1996 ). Effect of homogenization heat treatment on the microstructure and heat-affected zone microfissuring in welded cast alloy 718 . Metallurgical and Materials Transactions A , 27 ( 3 ), 785 – 790 . https://doi.org/ 10.1007/BF02648966 Open DOISearch in Google Scholar

Kruth, J. P. (1991). Material Incress Manufacturing by Rapid Prototyping Techniques. CIRP Annals, 40(2), 603–614. https://doi.org/10.1016/S0007-8506(07)61136-6 Kruth J. P. ( 1991 ). Material Incress Manufacturing by Rapid Prototyping Techniques . CIRP Annals , 40 ( 2 ), 603 – 614 . https://doi.org/ 10.1016/S0007-8506(07)61136-6 Open DOISearch in Google Scholar

Liu, F., Lin, X., Yang, G., Song, M., Chen, J., & Huang, W. (2011). Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy. Optics & Laser Technology, 43(1), 208–213. https://doi.org/10.1016/j.optlastec.2010.06.015 Liu F. Lin X. Yang G. Song M. Chen J. & Huang W . ( 2011 ). Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy . Optics & Laser Technology , 43 ( 1 ), 208 – 213 . https://doi.org/ 10.1016/j.optlastec.2010.06.015 Open DOISearch in Google Scholar

Malicki, M., Gadalińska, E., & Chmiel, M. (2016). The Impact of Damage in Anneling Inconel 718 on Hardness Measured by the Vickers Method. Fatigue of Aircraft Structures, 2016(8), 92–96. https://doi.org/10.1515/fas-2016-0007 Malicki M. Gadalińska E. & Chmiel M . ( 2016 ). The Impact of Damage in Anneling Inconel 718 on Hardness Measured by the Vickers Method . Fatigue of Aircraft Structures , 2016 ( 8 ), 92 – 96 . https://doi.org/ 10.1515/fas-2016-0007 Open DOISearch in Google Scholar

Mercelis, P., & Kruth, J.-P. (2006). Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyping Journal, 12(5), 254–265. https://doi.org/10.1108/13552540610707013 Mercelis P. & Kruth J.-P. ( 2006 ). Residual stresses in selective laser sintering and selective laser melting . Rapid Prototyping Journal , 12 ( 5 ), 254 – 265 . https://doi.org/ 10.1108/13552540610707013 Open DOISearch in Google Scholar

Mostafa, A., Rubio, I. P., Brailovski, V., Jahazi, M., & Medraj, M. (2017). Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments. Metals, 7(6), 196. https://doi.org/10.3390/met7060196 Mostafa A. Rubio I. P. Brailovski V. Jahazi M. & Medraj M . ( 2017 ). Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments . Metals , 7 ( 6 ), 196 . https://doi.org/ 10.3390/met7060196 Open DOISearch in Google Scholar

Nezhadfar, P. D., Johnson, A. S., & Shamsaei, N. (2020). Fatigue behavior and microstructural evolution of additively manufactured Inconel 718 under cyclic loading at elevated temperature. International Journal of Fatigue, 136, 105598. https://doi.org/10.1016/j.ijfatigue.2020.105598 Nezhadfar P. D. Johnson A. S. & Shamsaei N . ( 2020 ). Fatigue behavior and microstructural evolution of additively manufactured Inconel 718 under cyclic loading at elevated temperature . International Journal of Fatigue , 136 , 105598 . https://doi.org/ 10.1016/j.ijfatigue.2020.105598 Open DOISearch in Google Scholar

Pinkerton, A. J., & Li, L. (2004). Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances. Journal of Physics D: Applied Physics, 37(14), 1885. https://doi.org/10.1088/0022-3727/37/14/003 Pinkerton A. J. & Li L . ( 2004 ). Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances . Journal of Physics D: Applied Physics , 37 ( 14 ), 1885 . https://doi.org/ 10.1088/0022-3727/37/14/003 Open DOISearch in Google Scholar

Popovich, V. A., Borisov, E. V., Popovich, A. A., Sufiiarov, V. Sh., Masaylo, D. V., & Alzina, L. (2017). Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting. Materials & Design, 131, 12–22. https://doi.org/10.1016/j.matdes.2017.05.065 Popovich V. A. Borisov E. V. Popovich A. A. Sufiiarov V. Sh. Masaylo D. V. & Alzina L . ( 2017 ). Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting . Materials & Design , 131 , 12 – 22 . https://doi.org/ 10.1016/j.matdes.2017.05.065 Open DOISearch in Google Scholar

Prevey, P. S. (1986). X-ray diffraction residual stress techniques. Lambda Technologies. Prevey P. S. ( 1986 ). X-ray diffraction residual stress techniques . Lambda Technologies . Search in Google Scholar

Radhakrishna, C., & Prasad Rao, K. (1997). The formation and control of Laves phase in superalloy 718 welds. Journal of Materials Science, 32(8), 1977–1984. https://doi.org/10.1023/A:1018541915113 Radhakrishna C. & Prasad Rao K . ( 1997 ). The formation and control of Laves phase in superalloy 718 welds . Journal of Materials Science , 32 ( 8 ), 1977 – 1984 . https://doi.org/ 10.1023/A:1018541915113 Open DOISearch in Google Scholar

Sanchez, S., Gaspard, G., Hyde, C. J., Ashcroft, I. A., Ravi, G. A., & Clare, A. T. (2021). The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion. Materials & Design, 204, 109647. https://doi.org/10.1016/j.matdes.2021.109647 Sanchez S. Gaspard G. Hyde C. J. Ashcroft I. A. Ravi G. A. & Clare A. T. ( 2021 ). The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion . Materials & Design , 204 , 109647 . https://doi.org/ 10.1016/j.matdes.2021.109647 Open DOISearch in Google Scholar

Sharman, A. R. C., Hughes, J. I., & Ridgway, K. (2006). An analysis of the residual stresses generated in Inconel 718TM when turning. Journal of Materials Processing Technology, 173(3), 359–367. Sharman A. R. C. Hughes J. I. & Ridgway K . ( 2006 ). An analysis of the residual stresses generated in Inconel 718TM when turning . Journal of Materials Processing Technology , 173 ( 3 ), 359 – 367 . Search in Google Scholar

Shiomi, M., Osakada, K., Nakamura, K., Yamashita, T., & Abe, F. (2004). Residual Stress within Metallic Model Made by Selective Laser Melting Process. CIRP Annals, 53(1), 195–198. https://doi.org/10.1016/S0007-8506(07)60677-5 Shiomi M. Osakada K. Nakamura K. Yamashita T. & Abe F . ( 2004 ). Residual Stress within Metallic Model Made by Selective Laser Melting Process . CIRP Annals , 53 ( 1 ), 195 – 198 . https://doi.org/ 10.1016/S0007-8506(07)60677-5 Open DOISearch in Google Scholar

Standard EN 15305:2008. (2008). Non-destructive testing – Test method for residual stress analysis by X-ray diffraction. Standard EN 15305:2008 . ( 2008 ). Non-destructive testing – Test method for residual stress analysis by X-ray diffraction . Search in Google Scholar

Sui, S., Chen, J., Fan, E., Yang, H., Lin, X., & Huang, W. (2017). The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 718. Materials Science and Engineering: A, 695, 6–13. https://doi.org/10.1016/j.msea.2017.03.098 Sui S. Chen J. Fan E. Yang H. Lin X. & Huang W . ( 2017 ). The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 718 . Materials Science and Engineering: A , 695 , 6 – 13 . https://doi.org/ 10.1016/j.msea.2017.03.098 Open DOISearch in Google Scholar

Wang, X., Gong, X., & Chou, K. (2017). Review on powder-bed laser additive manufacturing of Inconel 718 parts. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(11), 1890–1903. https://doi.org/10.1177/0954405415619883 Wang X. Gong X. & Chou K . ( 2017 ). Review on powder-bed laser additive manufacturing of Inconel 718 parts . Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , 231 ( 11 ), 1890 – 1903 . https://doi.org/ 10.1177/0954405415619883 Open DOISearch in Google Scholar

Yao, C. F., Jin, Q. C., Huang, X. C., Wu, D. X., Ren, J. X., & Zhang, D. H. (2013). Research on surface integrity of grinding Inconel718. International Journal of Advanced Manufacturing Technology, 65(5), 1019–1030. https://doi.org/10.1007/s00170-012-4236-7 Yao C. F. Jin Q. C. Huang X. C. Wu D. X. Ren J. X. & Zhang D. H. ( 2013 ). Research on surface integrity of grinding Inconel718 . International Journal of Advanced Manufacturing Technology , 65 ( 5 ), 1019 – 1030 . https://doi.org/ 10.1007/s00170-012-4236-7 Open DOISearch in Google Scholar