This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
Amato, K.N., Gaytan, S.M., Murr, L.E., Martinez, E., Shindo, P.W., Hernandez, J., Collins, S., Medina, F. (2012). Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting. Acta Materialia, 60(5), 2229–2239. https://doi.org/10.1016/j.actamat.2011.12.032AmatoK.N.GaytanS.M.MurrL.E.MartinezE.ShindoP.W.HernandezJ.CollinsS.MedinaF. (2012).Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting.,60(5),2229–2239. https://doi.org/10.1016/j.actamat.2011.12.032Open DOISearch in Google Scholar
Ardila, L.C., Garciandia, F., González-Díaz, J.B., Álvarez, P., Echeverria, A., Petite, M.M., Deffley, R., Ochoa, J. (2014). Effect of IN718 Recycled Powder Reuse on Properties of Parts Manufactured by Means of Selective Laser Melting. Physics Procedia, 56, 99–107. https://doi.org/10.1016/j.phpro.2014.08.152ArdilaL.C.GarciandiaF.González-DíazJ.B.ÁlvarezP.EcheverriaA.PetiteM.M.DeffleyR.OchoaJ. (2014).Effect of IN718 Recycled Powder Reuse on Properties of Parts Manufactured by Means of Selective Laser Melting.,56,99–107. https://doi.org/10.1016/j.phpro.2014.08.152Open DOISearch in Google Scholar
Blackwell, P. L. (2005). The mechanical and microstructural characteristics of laser-deposited IN718. Journal of Materials Processing Technology, 170(1), 240–246. https://doi.org/10.1016/j.jmatprotec.2005.05.005BlackwellP. L.(2005).The mechanical and microstructural characteristics of laser-deposited IN718.,170(1),240–246. https://doi.org/10.1016/j.jmatprotec.2005.05.005Open DOISearch in Google Scholar
Burke, M. G., & Miller, M. K. (1991). Precipitation in Alloy 718: A combined AEM and APFIM Investigation. In E.A. Loria (Ed), Superalloys 718, 625 and Various Derivatives (pp. 337–350). TMS. https://doi.org/10.7449/1991/Superalloys_1991_337_350BurkeM. G. & MillerM. K.(1991).Precipitation in Alloy 718: A combined AEM and APFIM Investigation. InLoriaE.A.(Ed),(pp.337–350).TMS. https://doi.org/10.7449/1991/Superalloys_1991_337_350Open DOISearch in Google Scholar
Ezugwu, E. O. (2004). High speed machining of aero-engine alloys. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 26(1), 1–11. https://doi.org/10.1590/S1678-58782004000100001EzugwuE. O.(2004).High speed machining of aero-engine alloys.,26(1),1–11. https://doi.org/10.1590/S1678-58782004000100001Open DOISearch in Google Scholar
Ferreri, N. C., Vogel, S. C., & Knezevic, M. (2020). Determining volume fractions of γ, γ′, γ″, δ, and MC-carbide phases in Inconel 718 as a function of its processing history using an advanced neutron diffraction procedure. Materials Science and Engineering: A, 781, 139228. https://doi.org/10.1016/j.msea.2020.139228FerreriN. C.VogelS. C. & KnezevicM. (2020).Determining volume fractions of γ, γ′, γ″, δ, and MC-carbide phases in Inconel 718 as a function of its processing history using an advanced neutron diffraction procedure.,781,139228. https://doi.org/10.1016/j.msea.2020.139228Open DOISearch in Google Scholar
Gadalińska, E., Michałowski, A., & Czarnewicz, S. (2019). Determination of Stress Values in the Surface Layer of Inconel 718 Samples Dedicated to Fatigue Tests. Fatigue of Aircraft Structures, 2019(11), 78–86. https://doi.org/10.2478/fas-2019-0008GadalińskaE.MichałowskiA. & CzarnewiczS. (2019).Determination of Stress Values in the Surface Layer of Inconel 718 Samples Dedicated to Fatigue Tests.,2019(11),78–86. https://doi.org/10.2478/fas-2019-0008Open DOISearch in Google Scholar
Ghorbanpour, S., Deshmukh, K, Sahu, S., Riemslag, T., Reinton, E., Borisov, E., Popovich, A., Bertolo, V., Jiang, Q., Sanchez, M. T., Knezevic, M., & Popovich, V. (2022). Additive manufacturing of functionally graded inconel 718: Effect of heat treatment and building orientation on microstructure and fatigue behaviour. Journal of Materials Processing Technology, 306, 117573. https://doi.org/10.1016/j.jmatprotec.2022.117573GhorbanpourS.DeshmukhKSahuS.RiemslagT.ReintonE.BorisovE.PopovichA.BertoloV.JiangQ.SanchezM. T.KnezevicM. & PopovichV. (2022).Additive manufacturing of functionally graded inconel 718: Effect of heat treatment and building orientation on microstructure and fatigue behaviour.,306,117573. https://doi.org/10.1016/j.jmatprotec.2022.117573Open DOISearch in Google Scholar
Gribbin, S., Ghorbanpour, S., Ferreri, N. C., Bicknell, J., Tsukrov, I., & Knezevic, M. (2019). Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures. Materials Characterization, 149, 184–197. https://doi.org/10.1016/j.matchar.2019.01.028GribbinS.GhorbanpourS.FerreriN. C.BicknellJ.TsukrovI. & KnezevicM. (2019).Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures.,149,184–197. https://doi.org/10.1016/j.matchar.2019.01.028Open DOISearch in Google Scholar
Hilley, M. E. (Ed.). (1971). Residual stress measurement by X-ray diffraction-SAE J784a. Society of Automotive Engineers.HilleyM. E.(Ed.). (1971)..Society of Automotive Engineers.Search in Google Scholar
Hönnige, J., Seow, C.E., Ganguly, S., Xu, X., Cabeza, S., Coules, H., & Williams, S. (2021). Study of residual stress and microstructural evolution in as-deposited and inter-pass rolled wire plus arc additively manufactured Inconel 718 alloy after ageing treatment. Materials Science and Engineering: A, 801, 140368. https://doi.org/10.1016/j.msea.2020.140368HönnigeJ.SeowC.E.GangulyS.XuX.CabezaS.CoulesH. & WilliamsS. (2021).Study of residual stress and microstructural evolution in as-deposited and inter-pass rolled wire plus arc additively manufactured Inconel 718 alloy after ageing treatment.,801,140368. https://doi.org/10.1016/j.msea.2020.140368Open DOISearch in Google Scholar
Hosseini, E., & Popovich, V. A. (2019). A review of mechanical properties of additively manufactured Inconel 718. Additive Manufacturing, 30, 100877. https://doi.org/10.1016/j.addma.2019.100877HosseiniE. & PopovichV. A.(2019).A review of mechanical properties of additively manufactured Inconel 718.,30,100877. https://doi.org/10.1016/j.addma.2019.100877Open DOISearch in Google Scholar
Huang, X., Chaturvedi, M. C., & Richards, N. L. (1996). Effect of homogenization heat treatment on the microstructure and heat-affected zone microfissuring in welded cast alloy 718. Metallurgical and Materials Transactions A, 27(3), 785–790. https://doi.org/10.1007/BF02648966HuangX.ChaturvediM. C. & RichardsN. L.(1996).Effect of homogenization heat treatment on the microstructure and heat-affected zone microfissuring in welded cast alloy 718.,27(3),785–790. https://doi.org/10.1007/BF02648966Open DOISearch in Google Scholar
Kruth, J. P. (1991). Material Incress Manufacturing by Rapid Prototyping Techniques. CIRP Annals, 40(2), 603–614. https://doi.org/10.1016/S0007-8506(07)61136-6KruthJ. P.(1991).Material Incress Manufacturing by Rapid Prototyping Techniques.,40(2),603–614. https://doi.org/10.1016/S0007-8506(07)61136-6Open DOISearch in Google Scholar
Liu, F., Lin, X., Yang, G., Song, M., Chen, J., & Huang, W. (2011). Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy. Optics & Laser Technology, 43(1), 208–213. https://doi.org/10.1016/j.optlastec.2010.06.015LiuF.LinX.YangG.SongM.ChenJ. & HuangW. (2011).Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy.,43(1),208–213. https://doi.org/10.1016/j.optlastec.2010.06.015Open DOISearch in Google Scholar
Malicki, M., Gadalińska, E., & Chmiel, M. (2016). The Impact of Damage in Anneling Inconel 718 on Hardness Measured by the Vickers Method. Fatigue of Aircraft Structures, 2016(8), 92–96. https://doi.org/10.1515/fas-2016-0007MalickiM.GadalińskaE. & ChmielM. (2016).The Impact of Damage in Anneling Inconel 718 on Hardness Measured by the Vickers Method.,2016(8),92–96. https://doi.org/10.1515/fas-2016-0007Open DOISearch in Google Scholar
Mercelis, P., & Kruth, J.-P. (2006). Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyping Journal, 12(5), 254–265. https://doi.org/10.1108/13552540610707013MercelisP. & KruthJ.-P.(2006).Residual stresses in selective laser sintering and selective laser melting.,12(5),254–265. https://doi.org/10.1108/13552540610707013Open DOISearch in Google Scholar
Mostafa, A., Rubio, I. P., Brailovski, V., Jahazi, M., & Medraj, M. (2017). Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments. Metals, 7(6), 196. https://doi.org/10.3390/met7060196MostafaA.RubioI. P.BrailovskiV.JahaziM. & MedrajM. (2017).Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments.,7(6),196. https://doi.org/10.3390/met7060196Open DOISearch in Google Scholar
Nezhadfar, P. D., Johnson, A. S., & Shamsaei, N. (2020). Fatigue behavior and microstructural evolution of additively manufactured Inconel 718 under cyclic loading at elevated temperature. International Journal of Fatigue, 136, 105598. https://doi.org/10.1016/j.ijfatigue.2020.105598NezhadfarP. D.JohnsonA. S. & ShamsaeiN. (2020).Fatigue behavior and microstructural evolution of additively manufactured Inconel 718 under cyclic loading at elevated temperature.,136,105598. https://doi.org/10.1016/j.ijfatigue.2020.105598Open DOISearch in Google Scholar
Pinkerton, A. J., & Li, L. (2004). Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances. Journal of Physics D: Applied Physics, 37(14), 1885. https://doi.org/10.1088/0022-3727/37/14/003PinkertonA. J. & LiL. (2004).Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances.,37(14),1885. https://doi.org/10.1088/0022-3727/37/14/003Open DOISearch in Google Scholar
Popovich, V. A., Borisov, E. V., Popovich, A. A., Sufiiarov, V. Sh., Masaylo, D. V., & Alzina, L. (2017). Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting. Materials & Design, 131, 12–22. https://doi.org/10.1016/j.matdes.2017.05.065PopovichV. A.BorisovE. V.PopovichA. A.SufiiarovV. Sh.MasayloD. V. & AlzinaL. (2017).Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting.,131,12–22. https://doi.org/10.1016/j.matdes.2017.05.065Open DOISearch in Google Scholar
Prevey, P. S. (1986). X-ray diffraction residual stress techniques. Lambda Technologies.PreveyP. S.(1986)..Lambda Technologies.Search in Google Scholar
Radhakrishna, C., & Prasad Rao, K. (1997). The formation and control of Laves phase in superalloy 718 welds. Journal of Materials Science, 32(8), 1977–1984. https://doi.org/10.1023/A:1018541915113RadhakrishnaC. & Prasad RaoK. (1997).The formation and control of Laves phase in superalloy 718 welds.,32(8),1977–1984. https://doi.org/10.1023/A:1018541915113Open DOISearch in Google Scholar
Sanchez, S., Gaspard, G., Hyde, C. J., Ashcroft, I. A., Ravi, G. A., & Clare, A. T. (2021). The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion. Materials & Design, 204, 109647. https://doi.org/10.1016/j.matdes.2021.109647SanchezS.GaspardG.HydeC. J.AshcroftI. A.RaviG. A. & ClareA. T.(2021).The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion.,204,109647. https://doi.org/10.1016/j.matdes.2021.109647Open DOISearch in Google Scholar
Sharman, A. R. C., Hughes, J. I., & Ridgway, K. (2006). An analysis of the residual stresses generated in Inconel 718TM when turning. Journal of Materials Processing Technology, 173(3), 359–367.SharmanA. R. C.HughesJ. I. & RidgwayK. (2006).An analysis of the residual stresses generated in Inconel 718TM when turning.,173(3),359–367.Search in Google Scholar
Shiomi, M., Osakada, K., Nakamura, K., Yamashita, T., & Abe, F. (2004). Residual Stress within Metallic Model Made by Selective Laser Melting Process. CIRP Annals, 53(1), 195–198. https://doi.org/10.1016/S0007-8506(07)60677-5ShiomiM.OsakadaK.NakamuraK.YamashitaT. & AbeF. (2004).Residual Stress within Metallic Model Made by Selective Laser Melting Process.,53(1),195–198. https://doi.org/10.1016/S0007-8506(07)60677-5Open DOISearch in Google Scholar
Standard EN 15305:2008. (2008). Non-destructive testing – Test method for residual stress analysis by X-ray diffraction.Standard EN 15305:2008. (2008)..Search in Google Scholar
Sui, S., Chen, J., Fan, E., Yang, H., Lin, X., & Huang, W. (2017). The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 718. Materials Science and Engineering: A, 695, 6–13. https://doi.org/10.1016/j.msea.2017.03.098SuiS.ChenJ.FanE.YangH.LinX. & HuangW. (2017).The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 718.,695,6–13. https://doi.org/10.1016/j.msea.2017.03.098Open DOISearch in Google Scholar
Wang, X., Gong, X., & Chou, K. (2017). Review on powder-bed laser additive manufacturing of Inconel 718 parts. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(11), 1890–1903. https://doi.org/10.1177/0954405415619883WangX.GongX. & ChouK. (2017).Review on powder-bed laser additive manufacturing of Inconel 718 parts.,231(11),1890–1903. https://doi.org/10.1177/0954405415619883Open DOISearch in Google Scholar
Yao, C. F., Jin, Q. C., Huang, X. C., Wu, D. X., Ren, J. X., & Zhang, D. H. (2013). Research on surface integrity of grinding Inconel718. International Journal of Advanced Manufacturing Technology, 65(5), 1019–1030. https://doi.org/10.1007/s00170-012-4236-7YaoC. F.JinQ. C.HuangX. C.WuD. X.RenJ. X. & ZhangD. H.(2013).Research on surface integrity of grinding Inconel718.,65(5),1019–1030. https://doi.org/10.1007/s00170-012-4236-7Open DOISearch in Google Scholar