1. bookVolume 27 (2019): Issue 4 (December 2019)
Journal Details
License
Format
Journal
eISSN
2450-5781
First Published
30 Mar 2017
Publication timeframe
4 times per year
Languages
English
access type Open Access

Measurement of Residual Stresses of Locomotive Wheel Treads During the Manufacturing Technological Cycle

Published Online: 04 Dec 2019
Volume & Issue: Volume 27 (2019) - Issue 4 (December 2019)
Page range: 236 - 241
Received: 01 Apr 2019
Accepted: 01 Aug 2019
Journal Details
License
Format
Journal
eISSN
2450-5781
First Published
30 Mar 2017
Publication timeframe
4 times per year
Languages
English
Abstract

The production of two-wheeled rolling stock represents, at first glance, a simple assembly process that significantly affects the overall functionality and safety of the vehicle. This is due to residual stresses that arise after assembly by pressing the wheel on the axle. The state of stress after assembly remains in the design has a decisive influence on the load-bearing capacity of the two-wheel drive, its lifespan but also the transfer of the pulling force in the case of locomotives. Therefore, it is very important to find suitable methods for determining residual stresses. Numerical and experimental approaches are already in place to gain information on the state of stress after compression, or during a real operation. The developed techniques and tools for estimation of residual stresses in locomotive wheel treads based on the acoustoelasticity effect using electromagnetic acoustic transformation are described in the paper. The original results of residual stress measurement in the treads during a technological cycle of locomotive wheel pair manufacturing are presented.

Keywords

[1] Kamyshev, A.V., Nikitina, N.E., Smirnov, V.A. (2010). Measurement of the residual stresses in the treads of railway wheels by the acoustoelasticity method. Russian Journal of Nondestructive Testing, 46 (3), 189-193.10.1134/S106183091003006XSearch in Google Scholar

[2] Murav’ev, V. V., Volkova, L. V. (2013). Evaluation of the interference value for the treads of locomotive wheels by the acoustic elasticity method. Russian Journal of Nondestructive Testing, 49 (9), 524-529.10.1134/S1061830913090064Search in Google Scholar

[3] Croccolo, D., De Agostinis, M., Ceschini, L., Morri, A., Marconi A. (2013). Interference fit effect on improving fatigue life of a holed single plate. Fatigue & Fracture of Engineering Materials & Structures, 36 (7), 689-698.10.1111/ffe.12039Search in Google Scholar

[4] Mädler, K., Geburtig, T., Detlev U. (2016). An experimental approach to determining the residual lifetimes of wheelset axles on a full-scale wheel-rail roller test rig. International Journal of Fatigue, 86, 58-63.10.1016/j.ijfatigue.2015.06.016Search in Google Scholar

[5] Motova, E.A., Nikitina, N.E., Tarasenko, Yu. P. (2013). Concerning the Possibility of Examining Compressor Blades according to Attenuation and Speed of Ultrasound. Journal of Machinery Manufacture and Reliability, 42 (4), 335-340.10.3103/S1052618813040109Search in Google Scholar

[6] Kostin V.N., Vasilenko O.N., Filatenkov D.Yu., Chekasina Yu.A., Serbin E.D. (2015). Magnetic and magnetoacoustic testing parameters of the stressed-strained state of carbon steels that were subjected to a cold plastic deformation and annealing. Russian Journal of Nondestructive Testing, 51 (10), 624-632.10.1134/S1061830915100071Search in Google Scholar

[7] Filinov V.V., Kuznetsov A.N., Arakelov P.G. (2017). Monitoring stressed state of pipelines by magnetic parameters of metal. Russian Journal of Nondestructive Testing, 53 (1), 51-61.10.1134/S1061830917010065Search in Google Scholar

[8] Wentao Song, Chunguang Xu, Qinxue Pan, Jianfeng Song (2016). Nondestructive testing and characterization of residual stress field using an ultrasonic method. Chinese Journal of Mechanical Engineering, 29 (2), 365-371.10.3901/CJME.2015.1023.126Search in Google Scholar

[9] Yashar Javadi, Seyed Hatef Mosteshary (2015). Evaluation of Welding Residual Stress in a Nickel Alloy Pressure Vessel using the Ultrasonic Stress Measurement Technique. Materials Evaluation, 73 (6), 862-868.Search in Google Scholar

[10] Allen, D.R., Sayers, C.M. (1984). The measurement of residual stress in textured steel using an ultrasonic velocity combinations technique. Ultrasonics, 22 (4), 179-188.10.1016/0041-624X(84)90034-9Search in Google Scholar

[11] Chunguang Xu, Wentao Song, Qinxue Pan, Huanxin Li, Shuai Liu. (2015). Nondestructive Testing Residual Stress Using Ultrasonic Critical Refracted Longitudinal Wave. Physics Procedia, 70, 594-598.10.1016/j.phpro.2015.08.030Search in Google Scholar

[12] Uglov A.L., Khlybov A.A. (2015). On the inspection of the stressed state of anisotropic steel pipelines using the acoustoelasticity method. Russian Journal of Nondestructive Testing, 51 (4), 210-216.10.1134/S1061830915040087Search in Google Scholar

[13] Smirnov A.N., Knyazkov V.L., Abakov N.V., Ozhiganov E.A., Koneva N.A., Popova N.A. (2018) Acoustic evaluation of the stress-strained state of welded carbon steel joints after different modes of heat input. Russian Journal of Nondestructive Testing, 54 (1), 37-43.10.1134/S1061830918010072Search in Google Scholar

[14] Hirao M., Ogi H. Electromagnetic Acoustic Transducers: Noncontacting Ultrasonic Measurements Using EMATs. Tokyo: Springer Japan, 2017. 380 с.10.1007/978-4-431-56036-4Search in Google Scholar

[15] Murav’ev V.V., Volkova L.V., Platunov A.V., Kulikov V.A. (2016). An electromagnetic-acoustic method for studying stress-strain states of rails. Russian Journal of Nondestructive Testing, 52 (7), 370-376.10.1134/S1061830916070044Search in Google Scholar

[16] Murav’ev V.V., Tapkov K.A. (2017). Evaluation of Strain-Stress State of the Rails in the Production. Devices and Methods of Measurements, 8 (3), 236-245.10.21122/2220-9506-2017-8-3-263-270Search in Google Scholar

[17] Murav’ev V.V., Murav’eva O.V., Petrov K.V. (2017). Connection between the properties of 40kh-steel bar stock and the speed of bulk and Rayleigh waves. Russian Journal of Nondestructive Testing, 53 (8), 560-567.10.1134/S1061830917080046Search in Google Scholar

[18] Murav’ev V.V., Volkova L.V., Platunov A.V., Buldakova I.V., Gushchina L.V. (2018) Investigations of the structural and strain-stress state of the rails of current production by the acoustic elasticity method. Bulletin of Kalashnikov ISTU, 21(2), 13-23.10.22213/2413-1172-2018-2-13-23Search in Google Scholar

[19] Murav’ev V.V., Murav’eva O.V., Petrov K.V. (2018) Contactless electromagnetic acoustic techniques of diagnostics and assessment of mechanical properties of steel rolled bars. Materials physics and mechanics, 38 (1), 48-53.Search in Google Scholar

[20] Dovica, M., Busa, J., Palencar, R., Duris, S., Soos, L., Vrba, I., Kelemenova, T., Skovranek, T. (2013). Comparison of methods for analysis of deviations from roundness. Measurement Techniques, 56 (9), 1021-1025.10.1007/s11018-013-0323-xSearch in Google Scholar

[21] Jančárik, V., Harťanský, R., Slížik, J., Mierka, M., Halgoš,J., Hallon,J., Hricko, J. (2019). Autonomous sensor of electromagnetic field. In Review of Scientific Instruments. Vol. 90, Iss. 6 Art. No. 64705.10.1063/1.509018531255044Search in Google Scholar

[22] Hornik, J.; Peslova, F.; Krum, S. (2016) Selection of basic input variables for computational modeling of brake shoes. Procedia Engineering, 136, 300-305.10.1016/j.proeng.2016.01.214Search in Google Scholar

[23] Horník, J., Zuna, P., Málek, J. (2017) Evaluation of changes of mechanical properties of selected Cr-Ni-Mo steels for heavy forgings during long time annealing. Materials Science Forum, 891, 149-154.10.4028/www.scientific.net/MSF.891.149Search in Google Scholar

[24] Slížik, J., Harťanský, R. (2013). Metrology of Electromagnetic Intensity Measurement in Near Field. In Quality Innovation Prosperity. Vol. 17, Iss. 1 (2013), pp. 57-66.10.12776/qip.v17i1.79Search in Google Scholar

[25] Budenkov G.A., Korobeinikova O.V. (2009) Influence of the chemical composition and temperature of metals on the efficiency of electromagnetic-acoustic transformation. Russian Journal of Nondestructive Testing. 45 (4), 252-258.10.1134/S1061830909040056Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo