1. bookVolume 24 (2020): Issue 2 (June 2020)
Journal Details
License
Format
Journal
First Published
12 Mar 2016
Publication timeframe
4 times per year
Languages
English
access type Open Access

Impact Assessment of Farm Tractor Engine Fuel Injector Damage on Engine Oil Properties

Published Online: 30 Jun 2020
Page range: 65 - 75
Received: 01 Mar 2020
Accepted: 01 May 2020
Journal Details
License
Format
Journal
First Published
12 Mar 2016
Publication timeframe
4 times per year
Languages
English

It is justified that the problems related to changes in physico-chemical properties, concentration of trace elements in lubricat-ing oil and the impact of these changes and their dynamics on vehicle structural elements should be considered in detail. It is important that empirical data, theoretical relationships and test results should be taken into account. The paper presents re-search results of the selected physico-chemical parameters and the content of metals in samples of the used engine oil. The samples were collected both after the fuel system failure and during the operation of the farm tractor according to the date of changing engine oil assumed by the producer. An instrumental chemical analysis method HDXRF was used to determine chang-es of the content of trace elements Fe, Sn, Cu, Pb, P, Zn, Ca in engine oil. Additionally, changes in physico-chemical properties were determined with the use of FT-IR spectrometry. Courses of these changes were analysed on account of their impact on the utility properties of the engine oil.

Keywords

Booser, E.R. (1997). Tribology data handbook: an excellent friction, lubrication, and wear resource. CRC Press, New York, USA.Search in Google Scholar

Chmielewski, Z. (2017). Stany niezawodnościowe oleju silnikowego w eksploatacji. Autobusy: technika, eksploatacja, systemy transportowe, 18, 761-764.Search in Google Scholar

Dostál, P., Rozlivka, J., Kumbár, V. (2019). Operational degradation of engine oil in agricultural technology. Acta Technologica Agriculturae, 22(1), 17-21.Search in Google Scholar

Gołębiowski, W., Wolak, A., Zając, G. (2018a). Definition of oil change intervals based on the analysis of selected physicochemical properties of used engine oils. Combustion Engines, 57, 44-50.Search in Google Scholar

Gołębiowski, W., Zając, G., Wolak, A. (2018b). Contents of metals in engine oils from agricultural tractors. Przemysł Chemiczny, 97, 696-699.Search in Google Scholar

Gołębiowski, W., Zając, G., Wolak, A. (2019a). Analysis of engine oils from farm tractors in the aspect of their change. Agricultural Engineering, 23(1), 25-38.Search in Google Scholar

Gołębiowski, W., Wolak, A., Zając, G. (2019b). The influence of the presence of a diesel particulate filter (DPF) on the physical and chemical properties as well as the degree of concentration of trace elements in used engine oils. Petroleum Science and Technology, 37(7), 746-755.Search in Google Scholar

Holloway, M. (2007). The Oil Analysis Handbook: A Comprehensive Guide to Using and Understanding Oil Analysis. NCH Corporation: Irving, TX, USA.Search in Google Scholar

Krupowies, J. (2007). Analiza zmian właściwości olejów smarowych użytkowanych w przekładni napędu głównego statków. Problemy Eksploatacji, 4, 175-187.Search in Google Scholar

Ljubas, D., Krpan, H., Matanović, I. (2010). Influence of engine oils dilution by fuels on their viscosity, flash point and fire point. Nafta: Exploration, Production, Processing, Petrochemistry, 61(2), 73-79.Search in Google Scholar

Malinowska, M. (2014). Analiza zanieczyszczeń oleju silnikowego stosowanego w silniku Cegielski-Sulzer 3AL25/30. Zeszyty Naukowe Akademii Morskiej w Gdyni, 83, 194-202.Search in Google Scholar

Raposo, H., Farinha, J.T., Fonseca, I., Ferreira, L.A. (2019). Condition Monitoring with Prediction Based on Diesel Engine Oil Analysis: A Case Study for Urban Buses. Actuators 8, 14.Search in Google Scholar

ASTM International. Standard practice for condition monitoring of in-service lubricants by trend analysis using Fourier transform infrared (FT-IR) spectrometry. ASTM International; 2010. New York: American Society for Testing and Materials.Search in Google Scholar

ASTM International. (2017). D7094-17a, Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester, West Conshohocken, PA.Search in Google Scholar

Stępień, Z., Urzędowska, W., Oleksiak, S., Czerwiński, J., Andersen, O. (2011). Oddziaływanie olejów napędowych zawierających FAME na procesy degradacji smarowych olejów silnikowych i wielkość emisji cząstek stałych. Nafta-Gaz, 67(4), 272-281.Search in Google Scholar

Urzędowska, W., Stępień, Z. (2012). Wybrane zagadnienia dotyczące zmian właściwości silnikowego oleju smarowego w eksploatacji. Nafta-Gaz, 12(LX), 1102-1110.Search in Google Scholar

Wolak, A., Zając, G., Gołębiowski, W. (2019). Determination of the content of metals in used lubricating oils using AAS. Petroleum Science and Technology, 37(1), 93-102.Search in Google Scholar

Wolak, A., Zając, G., & Żółty, M. (2018). Changes of properties of engine oils diluted with diesel oil under real operating conditions. Combustion Engines, 57.Search in Google Scholar

Zając, G., Szyszlak-Bargłowicz, J., Słowik, T., Kuranc, A., Kamińska, A. (2015). Designation of chosen heavy metals in used engine oils using the XRF method. Polish Journal of Environmental Studies, 24(5), 2277-2283.Search in Google Scholar

Zhi-Na, X., Jiu-Xiang, W., Jun, Q. (2012). Rapid Measurement of Diesel Engine Oil Quality By Near Infrared Spectroscopy (NIRS). The Open Petroleum Engineering Journal, 5(1), 58-62.Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo