<abstract xmlns="http://www.w3.org/1999/xhtml"><p>A new photovoltaic system combining electrical power production with snow mitigation intends to reduce the snow load on flat roofs. Applying electrical power to PV modules causes heat production on the module surface, allowing the ablation of snow. This study combines measurements and theoretical analysis to investigate which conditions are favourable for snow load reduction and discusses the system’s feasibility to perform a controlled snow load reduction in a heavy snow load scenario for buildings with flat roofs. Both melting and sublimating of snow are investigated as means to reduce the load. The results show that the potential for load reduction is highly dependent upon weather conditions and snowpack characteristics during system operation. The refreezing of meltwater and water saturation of snow are identified as phenomena potentially preventing sufficient load reduction in cold conditions. Due to such temperature sensitivity, the system is likely to be more suitable for warm climates occasionally experiencing heavy snow loads than for climates with long and cold winters.</p></abstract>

A new photovoltaic system combining electrical power production with snow mitigation intends to reduce the snow load on flat roofs. Applying electrical power to PV modules causes heat production on the module surface, allowing the ablation of snow. This study combines measurements and theoretical analysis to investigate which conditions are favourable for snow load reduction and discusses the system’s feasibility to perform a controlled snow load reduction in a heavy snow load scenario for buildings with flat roofs. Both melting and sublimating of snow are investigated as means to reduce the load. The results show that the potential for load reduction is highly dependent upon weather conditions and snowpack characteristics during system operation. The refreezing of meltwater and water saturation of snow are identified as phenomena potentially preventing sufficient load reduction in cold conditions. Due to such temperature sensitivity, the system is likely to be more suitable for warm climates occasionally experiencing heavy snow loads than for climates with long and cold winters.

A Feasibility Study of Photovoltaic Snow Mitigation Systems for Flat Roofs

Department of Mathematical Sciences and Technology

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

{"article-title":"A Feasibility Study of Photovoltaic Snow Mitigation Systems for Flat Roofs"}

A new photovoltaic system combining electrical power production with snow mitigation intends to reduce the snow load on flat roofs. Applying electrical power...

A Feasibility Study of Photovoltaic Snow Mitigation Systems for Flat Roofs

Data publikacji: 16 maj 2020

Zakres stron: 81 - 96

Otrzymano: 14 cze 2019

DOI: https://doi.org/10.4467/2353737XCT.19.073.10724

Słowa kluczowe
snow, PV systems, load reduction, roofs, reliability, climate robustness

© 2019 Iver Frimannslund et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

A Feasibility Study of Photovoltaic Snow Mitigation Systems for Flat Roofs

Data publikacji: 16 maj 2020

Zakres stron: 81 - 96

Otrzymano: 14 cze 2019

DOI: https://doi.org/10.4467/2353737XCT.19.073.10724

Słowa kluczowesnow, PV systems, load reduction, roofs, reliability, climate robustness

© 2019 Iver Frimannslund et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Słowa kluczowe
snow, PV systems, load reduction, roofs, reliability, climate robustness