<abstract xmlns="http://www.w3.org/1999/xhtml">
<p>The test procedures for determining Young’s modulus in concrete are complicated and time-consuming. Therefore, attempts to search for alternative methods of its determination are not surprising. The relationship between the value of compressive strength and Young’s modulus in concrete is known. However, the strength of this relationship in fibre-reinforced concrete has not been exactly described. The article attempts to investigate the strength of the correlation between Young’s modulus and the compressive strength of fibre-reinforced concrete. The influence of the amount of fibres on this relationship was also checked. Two types of specimen were used for the tests. The specimens differed in the content of steel fibres, 0.25% and 0.50%, respectively. In order to determine the correlation relationship, the method of linear regression and the coefficient of linear correlation were used. The use of the determination coefficient allowed us to examine the degree of explanation of one variable by another. </p>
</abstract>

The test procedures for determining Young’s modulus in concrete are complicated and time-consuming. Therefore, attempts to search for alternative methods of its determination are not surprising. The relationship between the value of compressive strength and Young’s modulus in concrete is known. However, the strength of this relationship in fibre-reinforced concrete has not been exactly described. The article attempts to investigate the strength of the correlation between Young’s modulus and the compressive strength of fibre-reinforced concrete. The influence of the amount of fibres on this relationship was also checked. Two types of specimen were used for the tests. The specimens differed in the content of steel fibres, 0.25% and 0.50%, respectively. In order to determine the correlation relationship, the method of linear regression and the coefficient of linear correlation were used. The use of the determination coefficient allowed us to examine the degree of explanation of one variable by another.

Determination of the linear correlation coefficient between Young’s modulus and the compressive strength in fibre-reinforced concrete based on experimental studies

Production Engineering Archives

This work is licensed under the Creative Commons Attribution 4.0 International License.

The test procedures for determining Young’s modulus in concrete are complicated and time-consuming. Therefore, attempts to search for alternative methods of...

Determination of the linear correlation coefficient between Young’s modulus and the compressive strength in fibre-reinforced concrete based on experimental studies

Data publikacji: 28 sie 2023

Zakres stron: 288 - 297

Otrzymano: 15 lis 2022

Przyjęty: 28 kwi 2023

DOI: https://doi.org/10.30657/pea.2023.29.33

Słowa kluczowe
Young’s modulus, compressive strength, fibre-reinforced concrete, linear regression method, linear correlation coefficient

© 2023 Agnieszka Czajkowska et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Determination of the linear correlation coefficient between Young’s modulus and the compressive strength in fibre-reinforced concrete based on experimental studies

Data publikacji: 28 sie 2023

Zakres stron: 288 - 297

Otrzymano: 15 lis 2022

Przyjęty: 28 kwi 2023

DOI: https://doi.org/10.30657/pea.2023.29.33

Słowa kluczoweYoung’s modulus, compressive strength, fibre-reinforced concrete, linear regression method, linear correlation coefficient

© 2023 Agnieszka Czajkowska et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Słowa kluczowe
Young’s modulus, compressive strength, fibre-reinforced concrete, linear regression method, linear correlation coefficient