<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml">The aim of the work is to describe a capability of the active carbon CARBON L-2-4 (AC) and of the nanocarbon (NC) materials containing iron nanoparticles to continuously remove SO2 from air. The carbon nanomaterials (NC) containing iron nanoparticles were synthesised using a chemical vapor deposition method - through catalytic decomposition of ethylene on nanocrystalline iron.The process of SO2 removal was carried out on dry and wet with water carbon catalyst (AC or NC) and was studied for inlet SO2 concentration 0.3 vol.% in the presence of O2, N2 and H2O, in the temperature range of 40-80°C.</abstract>

The aim of the work is to describe a capability of the active carbon CARBON L-2-4 (AC) and of the nanocarbon (NC) materials containing iron nanoparticles to continuously remove SO2 from air. The carbon nanomaterials (NC) containing iron nanoparticles were synthesised using a chemical vapor deposition method - through catalytic decomposition of ethylene on nanocrystalline iron.The process of SO2 removal was carried out on dry and wet with water carbon catalyst (AC or NC) and was studied for inlet SO2 concentration 0.3 vol.% in the presence of O2, N2 and H2O, in the temperature range of 40-80°C.

Removal of SO2 from gases on carbon materials

Institute of Chemical and Environmental Engineering, West Pomeranian University of Technology Szczecin, ul. Pułaskiego 10, 70-322 Szczecin, Poland

Polish Journal of Chemical Technology

Removal of SO from gases on carbon materials

{"article-title":{"sub":2,"content":["Removal of SO","from gases on carbon materials"]}}

The aim of the work is to describe a capability of the active carbon CARBON L-2-4 (AC) and of the nanocarbon (NC) materials containing iron nanoparticles to...

Removal of SO₂ from gases on carbon materials

Data publikacji: 03 kwi 2012

Zakres stron: 41 - 45

DOI: https://doi.org/10.2478/v10026-012-0057-6

Słowa kluczowe
sulphur dioxide removal, nanocarbon materials

This content is open access.