<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>The paper provides an overview of the application of Computational Fluid Dynamics tools for predicting transport processes in two-phase flow in a SMX static mixer. The overview is achieved by taking a brief look at factors: mesh generation, development of sub-models, post-processing including validation and quantitative verification of CFD results with experimental data. Two types of numerical approach were used in the simulations: the Reynolds averaged Navier-Stokes in the steady-state mode with the standard k-??turbulence model and Large Eddy Simulations in the unsteady mode. Both CFD techniques were applied to calculate flow velocities, pressure drop and homogenisation level in a SMX static mixer of the liquid-liquid mixture. The steady state drop size distribution was obtained by implementation procedure containing the population balance equation, where transport equations for the moments of the drop size distribution are solved and the closure problem is overcome by using the Quadrature Method of Moments.</p></abstract>

The paper provides an overview of the application of Computational Fluid Dynamics tools for predicting transport processes in two-phase flow in a SMX static mixer. The overview is achieved by taking a brief look at factors: mesh generation, development of sub-models, post-processing including validation and quantitative verification of CFD results with experimental data. Two types of numerical approach were used in the simulations: the Reynolds averaged Navier-Stokes in the steady-state mode with the standard k-??turbulence model and Large Eddy Simulations in the unsteady mode. Both CFD techniques were applied to calculate flow velocities, pressure drop and homogenisation level in a SMX static mixer of the liquid-liquid mixture. The steady state drop size distribution was obtained by implementation procedure containing the population balance equation, where transport equations for the moments of the drop size distribution are solved and the closure problem is overcome by using the Quadrature Method of Moments.

CFD modelling of two-phase liquid-liquid flow in a SMX static mixer

Institute of Chemical Engineering and Environmental Protection Processes, West Pomeranian University of Technology, al. Piastow 42, 71-065 Szczecin, Poland

Polish Journal of Chemical Technology

{"article-title":"CFD modelling of two-phase liquid-liquid flow in a SMX static mixer"}

The paper provides an overview of the application of Computational Fluid Dynamics tools for predicting transport processes in two-phase flow in a SMX static...

CFD modelling of two-phase liquid-liquid flow in a SMX static mixer

Data publikacji: 09 paź 2009

Zakres stron: 41 - 49

DOI: https://doi.org/10.2478/v10026-009-0034-x

Słowa kluczowe
CFD, LES, QMOM, two-phase flow, liquid-liquid dispersion, SMX static mixer

This content is open access.

CFD modelling of two-phase liquid-liquid flow in a SMX static mixer

Data publikacji: 09 paź 2009

Zakres stron: 41 - 49

DOI: https://doi.org/10.2478/v10026-009-0034-x

Słowa kluczoweCFD, LES, QMOM, two-phase flow, liquid-liquid dispersion, SMX static mixer

This content is open access.

Słowa kluczowe
CFD, LES, QMOM, two-phase flow, liquid-liquid dispersion, SMX static mixer