<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The article presents the results of calculations applied to compare flight envelopes of varying helicopter configurations. Performance of conventional helicopter with the main and tail rotors, in the case of compound helicopter, can be improved by applying wings and pusher propellers which generate an additional lift and horizontal thrust. The simplified model of a helicopter structure, consisting of a stiff fuselage and the main rotor treated as a stiff disk, is applied for evaluation of the rotorcraft performance and the required range of control system deflections. The more detailed model of deformable main rotor blades, applying the Galerkin method, is used to calculate rotor loads and blade deformations in defined flight states. The calculations of simulated flight states are performed considering data of a hypothetical medium class helicopter with the take-off mass of 6,000kg. In the case of both of the helicopter configurations, the articulated main rotor hub is taken under consideration. According to the Galerkin method, the elastic blade model allows to compute blade deformations as a combination of the blade bending and torsional eigen modes. Introduction of additional wing and pusher propellers allows to increase the range of operational speed over 300 km/h. Results of the simulation are presented as time-runs of rotor loads and blade deformations and in a form of disk distribution plots of rotor parameters. The simulation method can be useful in defining requirements for a high speed rotorcraft.</p>
</abstract>

The article presents the results of calculations applied to compare flight envelopes of varying helicopter configurations. Performance of conventional helicopter with the main and tail rotors, in the case of compound helicopter, can be improved by applying wings and pusher propellers which generate an additional lift and horizontal thrust. The simplified model of a helicopter structure, consisting of a stiff fuselage and the main rotor treated as a stiff disk, is applied for evaluation of the rotorcraft performance and the required range of control system deflections. The more detailed model of deformable main rotor blades, applying the Galerkin method, is used to calculate rotor loads and blade deformations in defined flight states. The calculations of simulated flight states are performed considering data of a hypothetical medium class helicopter with the take-off mass of 6,000kg. In the case of both of the helicopter configurations, the articulated main rotor hub is taken under consideration. According to the Galerkin method, the elastic blade model allows to compute blade deformations as a combination of the blade bending and torsional eigen modes. Introduction of additional wing and pusher propellers allows to increase the range of operational speed over 300 km/h. Results of the simulation are presented as time-runs of rotor loads and blade deformations and in a form of disk distribution plots of rotor parameters. The simulation method can be useful in defining requirements for a high speed rotorcraft.

Effectiveness of the Compound Helicopter Configuration in Rotorcraft Performance Increase

Transactions on Aerospace Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The article presents the results of calculations applied to compare flight envelopes of varying helicopter configurations. Performance of conventional...

Effectiveness of the Compound Helicopter Configuration in Rotorcraft Performance Increase

Data publikacji: 31 gru 2020

Zakres stron: 81 - 106

DOI: https://doi.org/10.2478/tar-2020-0023

Słowa kluczowe
compound helicopter, rotor loads, blade deformations

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Effectiveness of the Compound Helicopter Configuration in Rotorcraft Performance Increase

Data publikacji: 31 gru 2020

Zakres stron: 81 - 106

DOI: https://doi.org/10.2478/tar-2020-0023

Słowa kluczowecompound helicopter, rotor loads, blade deformations

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
compound helicopter, rotor loads, blade deformations