<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper presents the measurement method and results as well as the results of comparative calculations aimed at determination of material data for the package of ferromagnetic sheets insulated with epoxy lacquer. During the test, the package of sheets was treated as a 3D orthotropic material. The values of Young’s and Kirchhoff’s moduli for a pre-compressed package of sheets, in accordance with the used manufacturing technology of the medium and high power electric motors’ rotors, were detennined. The carried out FEM comparative calculations confirmed that the determined mechanical parameters of the package of sheets as a 3D orthotropic material, i.e. Young’s and Kirchhoff’s moduli, for the compressive stress range of 1.0÷2.5 MPa, are included in the linear range. It was assumed that the determined mechanical properties of the package of sheets are necessary at the design stage for FEM simulation calculations of the electric motors’ vibration and strength properties. As a result of the tests, it was found that they should be repeated in order to determine the properties of other sheets or those coated with different insulating lacquer.</p>
</abstract>

The paper presents the measurement method and results as well as the results of comparative calculations aimed at determination of material data for the package of ferromagnetic sheets insulated with epoxy lacquer. During the test, the package of sheets was treated as a 3D orthotropic material. The values of Young’s and Kirchhoff’s moduli for a pre-compressed package of sheets, in accordance with the used manufacturing technology of the medium and high power electric motors’ rotors, were detennined. The carried out FEM comparative calculations confirmed that the determined mechanical parameters of the package of sheets as a 3D orthotropic material, i.e. Young’s and Kirchhoff’s moduli, for the compressive stress range of 1.0÷2.5 MPa, are included in the linear range. It was assumed that the determined mechanical properties of the package of sheets are necessary at the design stage for FEM simulation calculations of the electric motors’ vibration and strength properties. As a result of the tests, it was found that they should be repeated in order to determine the properties of other sheets or those coated with different insulating lacquer.

Mechanical Properties of the Package of Ferromagnetic Sheets

Materials and Structure Research Centre, Institute of Aviation

Transactions on Aerospace Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Mechanical Properties of the Package of Ferromagnetic Sheets"}

The paper presents the measurement method and results as well as the results of comparative calculations aimed at determination of material data for the...

Mechanical Properties of the Package of Ferromagnetic Sheets

Data publikacji: 31 maj 2019

Zakres stron: 54 - 62

DOI: https://doi.org/10.2478/tar-2017-0006

Słowa kluczowe
asynchronous motor, package of sheets, FEM, vibration

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mechanical Properties of the Package of Ferromagnetic Sheets

Data publikacji: 31 maj 2019

Zakres stron: 54 - 62

DOI: https://doi.org/10.2478/tar-2017-0006

Słowa kluczoweasynchronous motor, package of sheets, FEM, vibration

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
asynchronous motor, package of sheets, FEM, vibration