<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The estimation of deformations after a large number of cycles is a major concern of geotechnical engineers. This paper presents an explicit formulation of the accumulated cyclic volumetric strain. This study is concerned with cyclic triaxial tests simulated through the calculation by the Finite Element Method. The parameters of identification of the first cycle (loading-unloading) are determined step by step, using, as a soil behavior model, the Soft Soil Hardening Model, then, the behavior of the soil after <italic>N</italic> cycles (<italic>N</italic> ---gt--- 1000) is simulated through the formulation proposed as a pseudo-creep. The comparison of the proposed method with several cyclic triaxial tests and a shallow foundation under cyclic loading approves the good compatibility of the proposed formula for this type of problem. This study does not take into account the effect of the grain size and the void ratio, things that can be translated by the coefficients <italic>C1</italic> and <italic>C2</italic>.</p>
</abstract>

The estimation of deformations after a large number of cycles is a major concern of geotechnical engineers. This paper presents an explicit formulation of the accumulated cyclic volumetric strain. This study is concerned with cyclic triaxial tests simulated through the calculation by the Finite Element Method. The parameters of identification of the first cycle (loading-unloading) are determined step by step, using, as a soil behavior model, the Soft Soil Hardening Model, then, the behavior of the soil after N cycles (N ---gt--- 1000) is simulated through the formulation proposed as a pseudo-creep. The comparison of the proposed method with several cyclic triaxial tests and a shallow foundation under cyclic loading approves the good compatibility of the proposed formula for this type of problem. This study does not take into account the effect of the grain size and the void ratio, things that can be translated by the coefficients C1 and C2.

Explicit Modeling of the Cyclic Behavior under a Large Number of Cycles: Application to the Case of Sand

Laboratory LMGHU, University 20 August 1955 of Skikda

Laboratory LGC-ROI, University of Batna 2

Selected Scientific Papers - Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The estimation of deformations after a large number of cycles is a major concern of geotechnical engineers. This paper presents an explicit formulation of the...

Explicit Modeling of the Cyclic Behavior under a Large Number of Cycles: Application to the Case of Sand

Data publikacji: 14 sty 2023

Zakres stron: 1 - 11

DOI: https://doi.org/10.2478/sspjce-2022-0009

Słowa kluczowe
cyclic, volumetric strain, triaxial test, drained condition, sand

© 2022 Djessas Imed Eddine et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Explicit Modeling of the Cyclic Behavior under a Large Number of Cycles: Application to the Case of Sand

Data publikacji: 14 sty 2023

Zakres stron: 1 - 11

DOI: https://doi.org/10.2478/sspjce-2022-0009

Słowa kluczowecyclic, volumetric strain, triaxial test, drained condition, sand

© 2022 Djessas Imed Eddine et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
cyclic, volumetric strain, triaxial test, drained condition, sand