Analysis of technologies for producing composites with polyester-glass recyclate

[1] Dvorak R., Kosior E., Hopewell P., Plastics recycling: challenges and opportunities, ‘Philosophical Transactions of The Royal Society’, August 2009, pp. 2115–2126.10.1098/rstb.2008.0311Search in Google Scholar

[2] Govignon Q., Bickerton S., Morris J., Kelly P.A., Full field monitoring of the resin flow and laminate properties during the resin infusion process, ‘Composites. Part A’, 2008, No. 39, pp. 1412–1426.10.1016/j.compositesa.2008.05.005Search in Google Scholar

[3] Hyla I., Śleziona J., Kompozyty. Elementy mechaniki i projektowania, Publ. Silesian University of Technology, Gliwice 2004 [Composites. Elements of mechanics and design — available in Polish].Search in Google Scholar

[4] Kowalska E., Wielgosz Z., Bartczak T., Utylizacja odpadów laminatów poliestrowo-szklanych, ‘Polimery’, 2002, Vol. 47, No. 2, pp. 110–116 [Waste disposal of polyester-glass laminates — available in Polish].10.14314/polimery.2002.110Open DOISearch in Google Scholar

[5] Lunn P., Tooling materiale ideal for resin infusion, ‘Reinforced Plastics’, 2004, Vol. 48, No. 8, pp. 345–368.10.1016/S0034-3617(04)00403-5Search in Google Scholar

[6] Myalski J., Określenie warunków infiltracji w infuzyjnej metodzie wytwarzania laminatów poliestrowo-szklanych, ‘Kompozyty’, 2009, Vol. 9, No. 2, pp. 138–143 [Determination of infiltration conditions in the infusion method of producing polyester-glass laminates — available in Polish].Search in Google Scholar

[7] Panasiuk K., Hajdukiewicz G., Production of composites with added waste polyester-glass with their initial mechanical properties, ‘Scientific Journals of the Maritime University of Szczecin’, 2017, Vol. 52, No. 124, pp. 30–36.Search in Google Scholar

[8] Pickering S. J., Recycling technologies for thermoset composite materials — current status, ‘Composites. Part A: Applied Science and Manufacturing’, 2006, Vol. 37, No. 8, pp. 1206–1215.10.1016/j.compositesa.2005.05.030Search in Google Scholar

[9] Sevostianov I. B., Verijenko U. E., Von Klemperer C. J., Chevallereau B., Mathematical model of stress formation during vacuum resin infusion process, ‘Composites. Part B’, Vol. 30, No. 5, pp. 513–521.10.1016/S1359-8368(99)00012-8Search in Google Scholar

[10] Wiliams C. D., Grove S. M., Summerscales J., The compression response of fibre-reinforced plastic plates during manufacture by the resin infusion under flexible tooling metod, ‘Composites. Part A’, 1998, Vol. 29, No. 1–2, pp. 111–114.10.1016/S1359-835X(97)00038-9Search in Google Scholar

[11] http://liteboat.fr/technology/[access 29.05.2018].Search in Google Scholar

[12] http://vectorply.com/infusion-success-starts-with-r2o/ [access 29.05.2018].Search in Google Scholar

[13] http://www.baltazarkompozyty.pl/index.php?option=com_content&view=article&id=224:technologie-wytwarzania-kompozytow-polimerowych-cz-1&catid=15&Itemid=46 [access 27.04.2018].Search in Google Scholar

[14] http://www.ciechzywice.pl/pl/produkty/chemia-organiczna/zywice/zywice-poliestrowenienasycone [access 27.04.2018].Search in Google Scholar

[15] https://archiwum.mos.gov.pl/g2/big/2013_03/59197ee6f23ffae7686d24b56e7687bd.pdf [access 27.04.2018].Search in Google Scholar