<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This study aims to improve the technology for processing parts from hard-to-work materials, to study and substantiate the parameters of the plasma-assisted machining processing of surfaces of alloy steel parts to increase processing productivity and ensure the necessary quality of surface layers. Theoretical studies consist in determining the parameters of the thermal field of a workpiece during milling and turning with plasma heating. Experimental studies are based on a study of the interrelationship of the main indicators of machining with factors of preliminary plasma heating allowance.</p>
</abstract>

This study aims to improve the technology for processing parts from hard-to-work materials, to study and substantiate the parameters of the plasma-assisted machining processing of surfaces of alloy steel parts to increase processing productivity and ensure the necessary quality of surface layers. Theoretical studies consist in determining the parameters of the thermal field of a workpiece during milling and turning with plasma heating. Experimental studies are based on a study of the interrelationship of the main indicators of machining with factors of preliminary plasma heating allowance.

Evaluation of the Quality Parameters of the Surface Layer of Parts After Machining with Plasma Heating

Department of Mechanical Engineering Technology

National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

National Technical University “Kharkiv Polytechnic Institute”, Institute of Education and Science in Mechanical Engineering and Transport

Department of Theory and Computer-Aided Design of Mechanisms and Machines

Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

This study aims to improve the technology for processing parts from hard-to-work materials, to study and substantiate the parameters of the plasma-assisted...

Evaluation of the Quality Parameters of the Surface Layer of Parts After Machining with Plasma Heating

Data publikacji: 01 cze 2024

Zakres stron: 123 - 134

DOI: https://doi.org/10.2478/scjme-2024-0013

Słowa kluczowe
plasma-assisted machining, microhardness, microstructure, plasma arc

© 2024 Anton Ryazantsev et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Evaluation of the Quality Parameters of the Surface Layer of Parts After Machining with Plasma Heating

Data publikacji: 01 cze 2024

Zakres stron: 123 - 134

DOI: https://doi.org/10.2478/scjme-2024-0013

Słowa kluczoweplasma-assisted machining, microhardness, microstructure, plasma arc

© 2024 Anton Ryazantsev et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
plasma-assisted machining, microhardness, microstructure, plasma arc