<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper describes a possible approach of designing an unconventional turbocharger using co-simulation method. Our goal is to design turbochargers running optimally during pulsating and transient modes. It means to develop a tool capable of co-simulation between 3-D and 1-D CFD. This tool must be fast and precise enough and provide a reliable result. Influence of a coarse mesh versus fine mesh was examined. Different time step size was applied to determine calculation sensitivity. Different types of turbines were tested.</p>
</abstract>

This paper describes a possible approach of designing an unconventional turbocharger using co-simulation method. Our goal is to design turbochargers running optimally during pulsating and transient modes. It means to develop a tool capable of co-simulation between 3-D and 1-D CFD. This tool must be fast and precise enough and provide a reliable result. Influence of a coarse mesh versus fine mesh was examined. Different time step size was applied to determine calculation sensitivity. Different types of turbines were tested.

Prediction of Pulsating Turbine Operation Using 1-D - 3-D Co-Simulation

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Prediction of Pulsating Turbine Operation Using 1-D - 3-D Co-Simulation"}

This paper describes a possible approach of designing an unconventional turbocharger using co-simulation method. Our goal is to design turbochargers running...

Prediction of Pulsating Turbine Operation Using 1-D - 3-D Co-Simulation

Data publikacji: 18 lis 2022

Zakres stron: 81 - 96

DOI: https://doi.org/10.2478/scjme-2022-0043

Słowa kluczowe
Turbocharger, Turbine, CFD, 1-D, 3-D, Unconventional

© 2022 Lukáš Pacoň et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Prediction of Pulsating Turbine Operation Using 1-D - 3-D Co-Simulation

Data publikacji: 18 lis 2022

Zakres stron: 81 - 96

DOI: https://doi.org/10.2478/scjme-2022-0043

Słowa kluczoweTurbocharger, Turbine, CFD, 1-D, 3-D, Unconventional

© 2022 Lukáš Pacoň et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
Turbocharger, Turbine, CFD, 1-D, 3-D, Unconventional