<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The current standard methods of determining the mechanical losses of the ICE by motoring do not correspond to the low pressures in the cylinders of real engine operation. The new tried and tested method of determining passive resistances by motoring ICE with high working pressures in the cylinders is based on blowing doses of compressed air into the cylinders around BDC with special self-acting valves. When motoring with the new method, the same course of pressures in the cylinders and the same load on the crank mechanism, including the piston group, is achieved during combustion. The measurement proved the problem-free functionality of the self-acting valves, and the conducted experiments provided data on the dependence of mechanical and heat losses in the ICE on the working pressures in the cylinder.</p>
</abstract>

The current standard methods of determining the mechanical losses of the ICE by motoring do not correspond to the low pressures in the cylinders of real engine operation. The new tried and tested method of determining passive resistances by motoring ICE with high working pressures in the cylinders is based on blowing doses of compressed air into the cylinders around BDC with special self-acting valves. When motoring with the new method, the same course of pressures in the cylinders and the same load on the crank mechanism, including the piston group, is achieved during combustion. The measurement proved the problem-free functionality of the self-acting valves, and the conducted experiments provided data on the dependence of mechanical and heat losses in the ICE on the working pressures in the cylinder.

The Working Cycle of the Motoring Internal Combustion Engine by a New Method with Cylinder Pressures as in Real Engine Operation

Faculty of Mechanical Engineering, Technical University of Liberec

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The current standard methods of determining the mechanical losses of the ICE by motoring do not correspond to the low pressures in the cylinders of real engine...

The Working Cycle of the Motoring Internal Combustion Engine by a New Method with Cylinder Pressures as in Real Engine Operation

Data publikacji: 18 lis 2022

Zakres stron: 41 - 52

DOI: https://doi.org/10.2478/scjme-2022-0039

Słowa kluczowe
internal combustion engine (ICE), motoring without combustion, mechanical losses, thermodynamic analysis, experiment

© 2022 Radek Procházka et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Working Cycle of the Motoring Internal Combustion Engine by a New Method with Cylinder Pressures as in Real Engine Operation

Data publikacji: 18 lis 2022

Zakres stron: 41 - 52

DOI: https://doi.org/10.2478/scjme-2022-0039

Słowa kluczoweinternal combustion engine (ICE), motoring without combustion, mechanical losses, thermodynamic analysis, experiment

© 2022 Radek Procházka et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
internal combustion engine (ICE), motoring without combustion, mechanical losses, thermodynamic analysis, experiment