<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The objective of these analyzes is to evaluate the behaviour of bearing cage in operation and to determinate the safety factor towards to yield and ultimate strength of structure, when cage is under load. Safety factor can be defined as force needed to achieve yield or ultimate strength divided by operation force given from dynamic simulation. Second analyze was based on pressing of whole cage in radial direction to determinate radial pressing force needed to achieve yield and ultimate strength.</p>
</abstract>

The objective of these analyzes is to evaluate the behaviour of bearing cage in operation and to determinate the safety factor towards to yield and ultimate strength of structure, when cage is under load. Safety factor can be defined as force needed to achieve yield or ultimate strength divided by operation force given from dynamic simulation. Second analyze was based on pressing of whole cage in radial direction to determinate radial pressing force needed to achieve yield and ultimate strength.

Strength and Dynamic Assessment of Cage and Bearing for Railway Carriage

Slovak University of Technology in Bratislava

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Strength and Dynamic Assessment of Cage and Bearing for Railway Carriage"}

The objective of these analyzes is to evaluate the behaviour of bearing cage in operation and to determinate the safety factor towards to yield and ultimate...

Strength and Dynamic Assessment of Cage and Bearing for Railway Carriage

Data publikacji: 13 maj 2020

Zakres stron: 127 - 134

DOI: https://doi.org/10.2478/scjme-2020-0012

Słowa kluczowe
cage, MSC Adams, safety factor, dynamic simulation, radial force

© 2020 Šlesar Peter et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Strength and Dynamic Assessment of Cage and Bearing for Railway Carriage

Data publikacji: 13 maj 2020

Zakres stron: 127 - 134

DOI: https://doi.org/10.2478/scjme-2020-0012

Słowa kluczowecage, MSC Adams, safety factor, dynamic simulation, radial force

© 2020 Šlesar Peter et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
cage, MSC Adams, safety factor, dynamic simulation, radial force