<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The article outlines the main problems that the cement industry causes to the environment. Authors propose technological solutions aimed at resource-saving in cement production and environmental protection. The research is devoted to low-energy cement obtained on the basis of waste from processing skarn-magnetite ores. The characteristics of the composition and properties of the technogenic material are given. The authors have justified the feasibility of using skarn-magnetite ore enrichment waste as a part of a cement raw material mixture. The possibility of changing the composition of cement by reducing the energy-intensive alite phase is demonstrated. Technological and heat engineering calculations confirming the reduction of natural mineral raw materials and fuel costs in the production of cement were carried out. The processes of hydration of the developed cements have been investigated. A method for accelerating the hardening of low-base cements due to mechanical activation, the introduction of mineral additives and a modifier is proposed. The research revealed construction and technological advantages of the developed cements, which exhibit increased resistance during operation in an aggressive environment. Physical and mechanical tests of concretes made of low-base cement were carried out. The possibility of reducing the temperature during the heat treatment of concrete is proved. Physical and mechanical tests of concretes made of low-base cement were carried out. The paper presents environmental benefits of the developed cement technology.</p>
</abstract>

The article outlines the main problems that the cement industry causes to the environment. Authors propose technological solutions aimed at resource-saving in cement production and environmental protection. The research is devoted to low-energy cement obtained on the basis of waste from processing skarn-magnetite ores. The characteristics of the composition and properties of the technogenic material are given. The authors have justified the feasibility of using skarn-magnetite ore enrichment waste as a part of a cement raw material mixture. The possibility of changing the composition of cement by reducing the energy-intensive alite phase is demonstrated. Technological and heat engineering calculations confirming the reduction of natural mineral raw materials and fuel costs in the production of cement were carried out. The processes of hydration of the developed cements have been investigated. A method for accelerating the hardening of low-base cements due to mechanical activation, the introduction of mineral additives and a modifier is proposed. The research revealed construction and technological advantages of the developed cements, which exhibit increased resistance during operation in an aggressive environment. Physical and mechanical tests of concretes made of low-base cement were carried out. The possibility of reducing the temperature during the heat treatment of concrete is proved. Physical and mechanical tests of concretes made of low-base cement were carried out. The paper presents environmental benefits of the developed cement technology.

Environmental Aspects of Resource-Saving Cement Technology

Environmental and Climate Technologies

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Environmental Aspects of Resource-Saving Cement Technology"}

The article outlines the main problems that the cement industry causes to the environment. Authors propose technological solutions aimed at resource-saving in...

Environmental Aspects of Resource-Saving Cement Technology

Data publikacji: 30 paź 2021

Zakres stron: 803 - 815

DOI: https://doi.org/10.2478/rtuect-2021-0060

Słowa kluczowe
Low-base clinker, hardening, sintering temperature, technogenic materials

© 2021 Olga Miryuk, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Environmental Aspects of Resource-Saving Cement Technology

Data publikacji: 30 paź 2021

Zakres stron: 803 - 815

DOI: https://doi.org/10.2478/rtuect-2021-0060

Słowa kluczoweLow-base clinker, hardening, sintering temperature, technogenic materials

© 2021 Olga Miryuk, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Słowa kluczowe
Low-base clinker, hardening, sintering temperature, technogenic materials