Logowanie
Zarejestruj się
Zresetuj hasło
Publikuj i Dystrybuuj
Rozwiązania Wydawnicze
Rozwiązania Dystrybucyjne
Dziedziny
Architektura i projektowanie
Bibliotekoznawstwo i bibliologia
Biznes i ekonomia
Chemia
Chemia przemysłowa
Filozofia
Fizyka
Historia
Informatyka
Inżynieria
Inżynieria materiałowa
Językoznawstwo i semiotyka
Kulturoznawstwo
Literatura
Matematyka
Medycyna
Muzyka
Nauki farmaceutyczne
Nauki klasyczne i starożytne studia bliskowschodnie
Nauki o Ziemi
Nauki o organizmach żywych
Nauki społeczne
Prawo
Sport i rekreacja
Studia judaistyczne
Sztuka
Teologia i religia
Zagadnienia ogólne
Publikacje
Czasopisma
Książki
Materiały konferencyjne
Wydawcy
Blog
Kontakt
Wyszukiwanie
EUR
USD
GBP
Polski
English
Deutsch
Polski
Español
Français
Italiano
Koszyk
Home
Czasopisma
Reports on Geodesy and Geoinformatics
Tom 112 (2021): Zeszyt 1 (December 2021)
Otwarty dostęp
Detection of periodic displacements of shell structures with edges using spline surfaces, meshes and point clouds
Grzegorz Lenda
Grzegorz Lenda
oraz
Katarzyna Abrachamowicz
Katarzyna Abrachamowicz
| 17 gru 2021
Reports on Geodesy and Geoinformatics
Tom 112 (2021): Zeszyt 1 (December 2021)
O artykule
Poprzedni artykuł
Następny artykuł
Abstrakt
Artykuł
Ilustracje i tabele
Referencje
Autorzy
Artykuły w tym zeszycie
Podgląd
PDF
Zacytuj
Udostępnij
Article Category:
Original Article
Data publikacji:
17 gru 2021
Zakres stron:
27 - 33
Otrzymano:
03 lip 2021
Przyjęty:
18 lis 2021
DOI:
https://doi.org/10.2478/rgg-2021-0005
Słowa kluczowe
periodic measurements
,
deformations
,
point clouds
,
mesh
,
spline
© 2021 Grzegorz Lenda et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Figure 1
The shell studied during the measurements performed in 2013 (a) and 2020 (b)
Figure 2
The flange torn off and bent in 2013 (a) and repaired in 2020 (b). The tile damaged in 2020 (d) compared to 2013 (c). The photos show the edges of the flange and narrow longitudinal slats forming additional edges
Figure 3
Point clouds from the epoch 2013 (a) and 2020 (b)
Figure 4
Chamfering of the mesh edge (a), undulations of the spline surface along the edge (b)
Figure 5
Periodic displacements of the structure determined by direct comparison of point clouds. View of the entire structure as well as the left and right parts of the front patches with deformations and edges
Figure 6
Periodic displacements of the structure determined by comparing the primary point cloud with the mesh model created for the current measurement. View of the entire structure as well as the left and right parts of the front patches with deformations and edges
Figure 7
Periodic displacements of the structure determined by comparing the primary point cloud with the spline model created for the current measurement. View of the entire structure as well as the left and right parts of the front patches with deformations and edges
Percentages of the individual deviation ranges and the average deviations
Range of deviations [mm]
Percentage of deviation [%]
Cloud to cloud
Cloud to mesh
Cloud to spline
(0, 5]
98.83
95.16
37.75
(5, 10]
0.90
3.25
33.06
(10, 15]
0.11
1.13
22.35
(15, 20]
0.06
0.37
5.68
>20
0.11
0.09
1.16
Average deviation [mm]
1.9
2.8
7.1