This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Abdur Rani, M. F. and Rusli, N. (2017). The Accuracy Assessment of Agisoft Photoscan and Pix4D Mapper Software in Orthophoto Production. In Geomatics Research Innovation Competition (GRIC), volume 1, pages 1–4.Abdur RaniM. F.RusliN.2017The Accuracy Assessment of Agisoft Photoscan and Pix4D Mapper Software in Orthophoto ProductionIn114Search in Google Scholar
Ajayi, O. G. and Palmer, M. (2020). Modelling 3D Topography by comparing airborne LiDAR data with Unmanned Aerial System (UAS) photogrammetry under multiple imaging conditions. Geoplanning: Journal of Geomatics and Planning, 6(2):123–138, doi:10.14710/geoplanning.6.2.122–138.AjayiO. G.PalmerM.2020Modelling 3D Topography by comparing airborne LiDAR data with Unmanned Aerial System (UAS) photogrammetry under multiple imaging conditions6212313810.14710/geoplanning.6.2.122–138Open DOISearch in Google Scholar
Ajayi, O. G., Palmer, M., and Salubi, A. A. (2018). Modelling farmland topography for suitable site selection of dam construction using unmanned aerial vehicle (UAV) photogrammetry. Remote Sensing Applications: Society and Environment, 11:220–230, doi:10.1016/j.rsase.2018.07.007.AjayiO. G.PalmerM.SalubiA. A.2018Modelling farmland topography for suitable site selection of dam construction using unmanned aerial vehicle (UAV) photogrammetry1122023010.1016/j.rsase.2018.07.007Open DOISearch in Google Scholar
Ajeeth, C. (2015). Aerial 3D imaging and Monitoring of quarries with small drones. An article presented at United Arab Emirate Ministry of Environment and water. Retrieved form https://fnrc.gov.ae/forum/present/2015/45.pdf.AjeethC.2015Retrieved form https://fnrc.gov.ae/forum/present/2015/45.pdf.Search in Google Scholar
Akgul, M., Yurtseven, H., Gulci, S., and Akay, A. E. (2018). Evaluation of UAV-and GNSS-based DEMs for earthwork volume. Arabian Journal for Science and Engineering, 43(4):1893–1909, doi:10.1007/s13369-017-2811-9.AkgulM.YurtsevenH.GulciS.AkayA. E.2018Evaluation of UAV-and GNSS-based DEMs for earthwork volume4341893190910.1007/s13369-017-2811-9Open DOISearch in Google Scholar
Alidoost, F. and Arefi, H. (2017). Comparison of UAS-based photogrammetry software for 3D point cloud generation: a survey over a historical site. ISPRS Annals of Photogrammetry, Remote Sensing & Spatial Information Sciences, IV-4/W4:55–61, doi:10.5194/isprs-annals-IV-4-W4-55-2017.AlidoostF.ArefiH.2017Comparison of UAS-based photogrammetry software for 3D point cloud generation: a survey over a historical siteIV-4/W4556110.5194/isprs-annals-IV-4-W4-55-2017Open DOISearch in Google Scholar
Argese, F., Erriquez, G., Galeandro, A., Giraldo, M. S., Imperiale, M. G., Scarano, M., Specchiarello, A. R., Tarantino, E., and Turso, A. (2019). A procedure for automating earthwork computations using UAV photogrammetry and open-source software. AIP Conference Proceedings, 2116(1):280008, doi:10.1063/1.5114291.ArgeseF.ErriquezG.GaleandroA.GiraldoM. S.ImperialeM. G.ScaranoM.SpecchiarelloA. R.TarantinoE.TursoA.2019A procedure for automating earthwork computations using UAV photogrammetry and open-source software2116128000810.1063/1.5114291Open DOISearch in Google Scholar
Bahuguna, P., Dheeraj, K., and K., S. (2006). Modern survey instruments and their use in mine surveying. In Proceedings of the Indian Conference on Mine Surveying (ICMS-2006), September 8–9, 2006, Indian School of Mines (ISM), Shanbad, Jharkhand, India, pages 95–112.BahugunaP.K.DheerajK.S.2006InProceedings of the Indian Conference on Mine Surveying (ICMS-2006)September 8–9, 2006Indian School of Mines (ISM), Shanbad, Jharkhand, India95112Search in Google Scholar
Bater, C. W. and Coops, N. C. (2009). Evaluating error associated with lidar-derived DEM interpolation. Computers & Geosciences, 35(2):289–300.BaterC. W.CoopsN. C.2009Evaluating error associated with lidar-derived DEM interpolation35228930010.1016/j.cageo.2008.09.001Search in Google Scholar
Dastgheibifard, S. and Asnafi, M. (2018). A review on potential applications of unmanned aerial vehicle for construction industry. Sustainable Structure and Materials, 1(2):44–53, doi:10.26392/SSM.2018.01.02.044.DastgheibifardS.AsnafiM.2018A review on potential applications of unmanned aerial vehicle for construction industry12445310.26392/SSM.2018.01.02.044Open DOISearch in Google Scholar
DJI (n.d.). DJI Phantom 4-Specs, FAQ, Tutorials and downloads. Retrieved from https://www.dji.com/mobile/phantom-4/info.DJI(n.d.).Retrieved from https://www.dji.com/mobile/phantom-4/info.Search in Google Scholar
Gupta, S. G., Ghonge, D., Jawandhiya, P. M., et al. (2013). Review of unmanned aircraft system (UAS). International Journal of Advanced Research in Computer Engineering & Technology (IJARCET) Volume, 2(4):1646–1658.GuptaS. G.GhongeD.JawandhiyaP. M.2013Review of unmanned aircraft system (UAS)241646165810.2139/ssrn.3451039Search in Google Scholar
Harwin, S. and Lucieer, A. (2012). Assessing the accuracy of georeferenced point clouds produced via multi-view stereopsis from unmanned aerial vehicle (UAV) imagery. Remote Sensing, 4(6):1573–1599, doi:10.3390/rs4061573.HarwinS.LucieerA.2012Assessing the accuracy of georeferenced point clouds produced via multi-view stereopsis from unmanned aerial vehicle (UAV) imagery461573159910.3390/rs4061573Open DOISearch in Google Scholar
Hirayama, N., Kawata, Y., Suzuki, S., and Harada, K. (2009). Estimation procedure for potential quantity of tsunami debris on tsunami earthquake disasters.HirayamaN.KawataY.SuzukiS.HaradaK.2009Search in Google Scholar
Kuta, A. A., Ajayi, O. G., Osunde, T. J., Ibrahim, P. O., Dada, D. O., and Awwal, A. A. (2018). Investigation of the robustness of different contour interpolation models for the generation of contour map and digital elevation models. pages 1527–1541.KutaA. A.AjayiO. G.OsundeT. J.IbrahimP. O.DadaD. O.AwwalA. A.201815271541Search in Google Scholar
Martin, K. (2016). Assessing the Accuracy of Stockpile Volumes Obtained Through Aerial Surveying – Case Study. Retrieved from https://connexicore.com/wp-content/uploads/2018/08/stock_pile_volumes_case_study.pdf.MartinK.2016Retrieved from https://connexicore.com/wp-content/uploads/2018/08/stock_pile_volumes_case_study.pdf.Search in Google Scholar
Mohammed, A. I. and Abdulrahman, F. H. (2020). Evaluation of UAV-based DEM for volume calculation. Journal of Duhok University, 23(1):11–24, doi:10.26682/sjuod.2020.23.1.2.MohammedA. I.AbdulrahmanF. H.2020Evaluation of UAV-based DEM for volume calculation231112410.26682/sjuod.2020.23.1.2Open DOISearch in Google Scholar
Napoles, E. and Berber, M. (2018). Precise formula for volume computations using contours method. Boletim de Ciências Geodésicas, 24(1):18–27, doi:10.1590/S1982-21702018000100002.NapolesE.BerberM.2018Precise formula for volume computations using contours method241182710.1590/S1982-21702018000100002Open DOISearch in Google Scholar
Nguyen, Q. L., Bui, X.-N., Cao, X. C., and Le, V. C. (2019). An approach of mapping quarries in Vietnam using low-cost Unmanned Aerial Vehicles. In»ynieria Mineralna (Journal of the Polish Mineral Engineering Society), 21:248–262, doi:10.29227/IM-2019-02-79.NguyenQ. L.BuiX.-N.CaoX. C.LeV. C.2019An approach of mapping quarries in Vietnam using low-cost Unmanned Aerial Vehicles2124826210.29227/IM-2019-02-79Open DOISearch in Google Scholar
Pix4D Support (2020). How to improve the outputs of dense vegetation areas? Retrieved from https://support.pix4d.com/hc/en-us/articles/202560159-How-to-improve-the-outputs-of-dense-vegetation-areas.Pix4D Support2020Retrieved from https://support.pix4d.com/hc/en-us/articles/202560159-How-to-improve-the-outputs-of-dense-vegetation-areas.Search in Google Scholar
Propeller (2018). How stockpile volume measurement works in drone surveying with propeller. Retrieved from https://www.propelleraero.com/blog/how-stockpile-volume-measurement-works-in-drone-surveying/.Propeller2018Retrieved from https://www.propelleraero.com/blog/how-stockpile-volume-measurement-works-in-drone-surveying/.Search in Google Scholar
Raeva, P., Filipova, S., and Filipov, D. (2016). Volume computation of a stockpile – a study case comparing gps and uav measurements in an open pit quarry. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XLI(B1):12–19, doi:10.5194/isprsarchives-XLI-B1-999-2016. XXIII ISPRS Congress, 12–19 July 2016, Prague, Czech Republic.RaevaP.FilipovaS.FilipovD.2016Volume computation of a stockpile – a study case comparing gps and uav measurements in an open pit quarryXLIB1121910.5194/isprsarchives-XLI-B1-999-2016XXIII ISPRS Congress, 12–19 July 2016, Prague, Czech RepublicOpen DOISearch in Google Scholar
Rahman, A. A. A., Maulud, K. N. A., Mohd, F. A., Jaafar, O., and Tahar, K. N. (2017). Volumetric calculation using low cost unmanned aerial vehicle (UAV) approach. IOP Conference Series: Materials Science and Engineering, 270:012032, doi:10.1088/1757-899x/270/1/012032.RahmanA. A. A.MauludK. N. A.MohdF. A.JaafarO.TaharK. N.2017Volumetric calculation using low cost unmanned aerial vehicle (UAV) approach27001203210.1088/1757-899x/270/1/012032Open DOISearch in Google Scholar
Suziedelyte Visockiene, J., Brucas, D., and Ragauskas, U. (2014). Comparison of UAV images processing softwares. Journal of Measurements in Engineering, 2(2):111–121.Suziedelyte VisockieneJ.BrucasD.RagauskasU.2014Comparison of UAV images processing softwares22111121Search in Google Scholar
Tan, Q. and Xu, X. (2014). Comparative analysis of spatial interpolation methods: an experimental study. Sensors & Transducers, 165(2):155–163.TanQ.XuX.2014Comparative analysis of spatial interpolation methods: an experimental study1652155163Search in Google Scholar
Yoo, H. T., Lee, H., Chi, S., Hwang, B.-G., and Kim, J. (2017). A Preliminary Study on Disaster Waste Detection and Volume Estimation Based on 3D Spatial Information, pages 428–435. doi:10.1061/9780784480823.051.YooH. T.LeeH.ChiS.HwangB.-G.KimJ.201742843510.1061/9780784480823.051Open DOISearch in Google Scholar
Zylka, A. (2014). Small Unmanned Aerial Systems (sUAS) for Volume Estimation. UVM Honors College Senior Theses. Paper 44.ZylkaA.2014UVM Honors College Senior Theses. Paper 44.Search in Google Scholar