[1. Balawender A. (2005): Physical and mathematical model of losses in hydraulic motors. Developments in mechanical engineering, Gdansk University of Technology Publishers.]Search in Google Scholar
[2. Bing X., Junhui Z., Huayong Y., Bin Z. (2013): Investigation on the Radial Micro-motion about Piston of Axial Piston Pump. Chinese Journal of Mechanical Engineering, Vol. 26, No. 2. DOI: 10.3901/CJME.2013.02.325.10.3901/CJME.2013.02.325]Search in Google Scholar
[3. Deptula A., Osinski P., Partyka M. (2017): Identification of influence of part tolerances of 3PWR-SE pump on its total efficiency taking into consideration multi-valued logic trees. Polish Maritime Research, 1(93), Vol. 24. DOI: 10.1515/pomr-2017-000610.1515/pomr-2017-0006]Search in Google Scholar
[4. Dietrich M. et al (1999): Fundamentals of Machine Design, WNT Warszawa.]Search in Google Scholar
[5. Gao J., Huang W., Quan L., Huang J. (2017): The distributed parameter model of hydraulic axial piston motor and its application in hydraulic excavator swing systems. Proceedings of the Institution of Mechanical Engineers. Part I. Journal of Systems and Control Engineering. DOI: 10.1177/095965181770409810.1177/0959651817704098]Search in Google Scholar
[6. Guzowski A., Sobczyk A. (2014): Reconstruction of hydrostatic drive and control system dedicated for small mobile platform. American Society of Mechanical Engineers. DOI: dx.doi.org/10.1115/FPNI2014-7862.10.1115/FPNI2014-7862]Search in Google Scholar
[7. Jasinski R. (2008): Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part I). Polish Maritime Research, No. 4/(58), Vol. 15. DOI: doi.org/10.2478/v10012-007-0095-910.2478/v10012-007-0095-9]Search in Google Scholar
[8. Jasinski R. (2009): Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part II). Polish Maritime Research, No. 1/(59), Vol. 16. DOI: doi.org/10.2478/v10012-008-0012-x10.2478/v10012-008-0052-2]Search in Google Scholar
[9. Jasinski R. (2009): Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part III). Polish Maritime Research, No. 4(62), Vol. 16. DOI: 10.2478/v10012-008-0052-210.2478/v10012-008-0052-2]Search in Google Scholar
[10. Ke M., Ding F., Li B., Chen Z. (2006): Exploration of the influence of backing pressure on the efficiency of hydraulic motor. Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery 37(10).]Search in Google Scholar
[11. Kollek W., Osinski P., Wawrzycka U. (2017): The influence of gear micropump body asymmetry on stress distribution. Polish Maritime Research, 1(93), Vol. 24. DOI: 10.1515/pomr-2017-000710.1515/pomr-2017-0007]Search in Google Scholar
[12. Landvogt B., Osiecki L., Patrosz P., Zawistowski T., Zylinski B. (2014): Numerical simulation of fluid-structure interaction in the design process for a new axial hydraulic pump. Progress in Computational Fluid Dynamics. Vol. 14, Issue 1. DOI: doi.org/10.1504/PCFD.2014.05919810.1504/PCFD.2014.059198]Search in Google Scholar
[13. Litwin W., Dymarski C. (2016): Experimental research on water lubricated marine stern tube bearings in conditions of improper lubrication and cooling causing rapid bush wear. Tribology International Vol. 95. DOI: 10.1016/j. triboint.2015.12.00510.1016/j.triboint.2015.12.005]Search in Google Scholar
[14. Litwin W., Olszewski A. (2014): Water-Lubricated Sintered Bronze. Journal Bearings – Theoretical and Experimental Research. Tribology Transactions, No. 1, Vol. 57. DOI: 10.1080/10402004.2013.85698010.1080/10402004.2013.856980]Search in Google Scholar
[15. Lubinski J., Sliwinski P. (2014): Multi parameter sliding test result evaluation for the selection of material pair for wear resistant components of a hydraulic motor dedicated for use with environmentally friendly working fluids. Solid State Phenomena, Vol. 225. DOI: 10.4028/www.scientific.net/SSP.225.11510.4028/www.scientific.net/SSP.225.115]Search in Google Scholar
[16. Maczyszyn A. (2014): Energy analysis of rotary positive displacement machines used in hydrostatic transmissions. PhD thesis. Gdansk University of Technology.]Search in Google Scholar
[17. Niemann G., Winter H. (2003): Maschinenelemente – Band 2. Springer-Verlag. Berlin, Germany.10.1007/978-3-662-11873-3]Search in Google Scholar
[18. Osiecki L., Patrosz P., Landvogt B., Piechna J., Zawistowski T., Zylinski B. (2013): Simulation of fluid structure interaction in a novel design of high pressure axial piston hydraulic pump. Archive of Mechanical Engineering. The Journal of Committee on Machine Building of Polish Academy of Sciences. Vol. 60, Issue 4. DOI: https://doi.org/10.2478/meceng-2013-003110.2478/meceng-2013-0031]Search in Google Scholar
[19. Osiecki L., Patrosz P., Zawistowski T., Landvogt B., Piechna J., Zylinski B. (2011): Compensation of pressure peaks in PWK type hydraulic pumps. Key engineering materials. Vol. 490. DOI: 10.4028/www.scientific.net/KEM.490.3310.4028/www.scientific.net/KEM.490.33]Search in Google Scholar
[20. Osinski P., Deptula A., Partyka M. (2013): Discrete optimization of a gear pump after tooth root undercutting by means of multi-valued logic trees. Archives of Civil and Mechanical Engineering, No. 4/2013, DOI: 10.1016/j. acme.2013.05.001.10.1016/j.acme.2013.05.001]Search in Google Scholar
[21. Paszota Z. (2016): Energy losses in hydrostatic drive. LABERT Academic Publishing.]Search in Google Scholar
[22. Paszota Z. (2010): Energy losses in the hydraulic rotational motor – definitions and relations for evaluation of the efficiency of motor and hydrostatic drive. Polish Maritime Research, 2(65), Vol 17. DOI: 10.2478/v10012-010-0017-010.2478/v10012-010-0017-0]Search in Google Scholar
[23. Paszota Z. (2007): Power of energetic losses in hydrostatic drive system elements – definition, relationships, ranges of changes, energetic efficiencies. Part 1 – hydraulic motor. Napędy i Sterowanie, 11/2007, Poland.]Search in Google Scholar
[24. Paszota Z. (2008): Theoretical and mathematical models of torque of mechanical losses in hydraulic rotary motor used in the hydrostatic drive. International Conference CYLINDER “Research, design, manufacture and operation of hydraulic system”, KOMAG Mining Mechanisation Centre, Gliwice, Poland.]Search in Google Scholar
[25. Patrosz P. (2014): Deformation in the axial clearance compensation node in the satellite pump unit. Hydraulika i Pneumatyka, 1/2014, Poland.]Search in Google Scholar
[26. Pobedza J., Sobczyk A. (2014): Properties of high pressure water hydraulic components with modern coatings. Advanced Materials Research. Trans Tech Publications Ltd, 849/2014. DOI: 10.4028/www.scientific.net/AMR.849.100.10.4028/www.scientific.net/AMR.849.100]Search in Google Scholar
[27. Sliwinski P. (2014): Satellite pump and motor. Machines Technologies Materials, Vol. 8, Issue 9, Bulgaria.]Search in Google Scholar
[28. Sliwinski P. (2014): High pressure rotational seals for shaft of hydraulic displacement machines. Hydraulika i Pneumatyka, 3/2014, Poland.]Search in Google Scholar
[29. Sliwinski P. (2013): Pressure losses and power balance in the unloaded satellite pump. Hydraulika a Pneumatika, 1-2/2013, Slovakia.10.1016/S1359-6128(13)70196-4]Search in Google Scholar
[30. Sliwinski P. (2014): The flow of liquid in flat gaps of satellite motors working mechanism. Polish Maritime Research, No. 2(82), Vol. 21. DOI: 10.2478/pomr-2014-0019.10.2478/pomr-2014-0019]Search in Google Scholar
[31. Sliwinski P. (2017): The influence of water and mineral oil on volumetric losses in a hydraulic motor. Polish Maritime Research, No. S1 (93), Vol. 24. DOI: 10.1515/pomr-2017-0041.10.1515/pomr-2017-0041]Search in Google Scholar
[32. Sliwinski P. (2016): Satellite displacement machines. Basic of design and analysis of power loss. Gdansk University of Technology Publishers.]Search in Google Scholar
[33. Walczak P., Sobczyk A. (2014): Simulation of water hydraulic control system of Francis turbine. American Society of Mechanical Engineers. DOI: dx.doi.org/10.1115/FPNI2014-781410.1115/FPNI2014-7814]Search in Google Scholar
[34. Xiaogang Z., Long Q, Yang Y., Chengbin W., Liwei Y. (2012): Output characteristics of a series three-port axial piston pump. Chinese Journal of Mechanical Engineering, No. 3, Vol. 25. DOI: 10.3901/CJME.2012.03.49810.3901/CJME.2012.03.498]Search in Google Scholar
[35. Yu H., Luo C., Wang H. (2012): Performances of a balanced hydraulic motor with planetary gear train. Chinese Journal of Mechanical Engineering, No. 4, Vol. 25. DOI: 10.3901/CJME.2012.04.76010.3901/CJME.2012.04.760]Search in Google Scholar
[36. Zardin B., Natali E., Borghi M. (2019): Evaluation of the hydro-mechanical efficiency of external gear pumps. Energies, Vol. 12. DOI: 10.3390/en1213246810.3390/en12132468]Search in Google Scholar
[37. Zardin B., Borghi M., Materi S., Argentino P. (2018): Fluid-dynamic analysis of an in-line water piston pump. 73rd Conference of the Italian-Thermal-Machines-Engineering-Association. Pisa, Italy. Energy Procedia, Vol. 148. DOI: 10.1016/j.egypro.2018.08.04810.1016/j.egypro.2018.08.048]Search in Google Scholar
[38. Zloto T., Nagorka A. (2009): An efficient FEM for pressure analysis of oil film in a piston pump. Applied Mathematics and Mechanics, No. 1/2009, Vol. 30.10.1007/s10483-009-0106-z]Search in Google Scholar
[39. Catalogue of products made by Harken: www.harken.pl]Search in Google Scholar