<abstract xmlns="http://www.w3.org/1999/xhtml"><p> This paper proposes a practical way to predict the welding-induced deformation of 5-mm-thick steel ship panels prefabricated in a Polish shipyard, developed by means of a number of experiments and a body of data collected on the butt welding line using the submerged arc welding technique. The program of the experiments was so designed as to test different welding energy conditions as well as pressure values generated by the devices used during the welding. Subsequently, different welding trials were carefully carried out and data collected to find the most important parameters which contribute to welding deformation. The data obtained were analysed using the Design-ExpertR statistical software, and consideration was given to the data arrangement method that would allow for the most appropriate description of the welding deformation. As a result of the foregoing efforts, an approach to predicting the welding deformation, based on a numerical equation including the main welding parameters, was developed. The accuracy of the equation was partially evaluated and the results turned out to be satisfactory, as the actual and the predicted values were comparable. Another important advantage achieved was the arrangement of data used to compute the welding deformation.</p></abstract>

This paper proposes a practical way to predict the welding-induced deformation of 5-mm-thick steel ship panels prefabricated in a Polish shipyard, developed by means of a number of experiments and a body of data collected on the butt welding line using the submerged arc welding technique. The program of the experiments was so designed as to test different welding energy conditions as well as pressure values generated by the devices used during the welding. Subsequently, different welding trials were carefully carried out and data collected to find the most important parameters which contribute to welding deformation. The data obtained were analysed using the Design-ExpertR statistical software, and consideration was given to the data arrangement method that would allow for the most appropriate description of the welding deformation. As a result of the foregoing efforts, an approach to predicting the welding deformation, based on a numerical equation including the main welding parameters, was developed. The accuracy of the equation was partially evaluated and the results turned out to be satisfactory, as the actual and the predicted values were comparable. Another important advantage achieved was the arrangement of data used to compute the welding deformation.

An analysis of the welding-induced deformation of ship panels using a statistical tool

Faculty of Maritime Technology and Transportation, West Pomeranian University of Technology, Szczecin, 70-310 Szczecin, Al. Piastow 17, POLAND, +55 92 8804 9416

Faculty of Maritime Technology and Transportation, West Pomeranian University of Technology, Szczecin, 70-310 Szczecin, Al. Piastow 17, POLAND, +48 91 449 4696

Polish Maritime Research

This paper proposes a practical way to predict the welding-induced deformation of 5-mm-thick steel ship panels prefabricated in a Polish shipyard, developed by...

An analysis of the welding-induced deformation of ship panels using a statistical tool

Data publikacji: 10 lip 2013

Zakres stron: 74 - 81

DOI: https://doi.org/10.2478/pomr-2013-0019

Słowa kluczowe
ship production technology, welding deformation, design of experiment, statistics

This content is open access.

An analysis of the welding-induced deformation of ship panels using a statistical tool

Data publikacji: 10 lip 2013

Zakres stron: 74 - 81

DOI: https://doi.org/10.2478/pomr-2013-0019

Słowa kluczoweship production technology, welding deformation, design of experiment, statistics

This content is open access.

Słowa kluczowe
ship production technology, welding deformation, design of experiment, statistics