<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Untreated coking effluent presents a great challenge for sustainable development of the steel industry and environment preservation. In this study, an internal micro-electrolysis method using Fe/C materials was employed for pretreatment of real coking wastewater with high mass concentration. The Fe/C materials were prepared by Fe powder and graphite powder; and the characteristics of surface morphology, structure, composition of the synthesized materials were examined by Scanning electron microscopy (SEM), X-ray diffraction (XRD) and Energy Dispersive X-ray Spectroscopy (EDS). The effects of factors namely dosage of Fe/C material, treatment time, initial pH and temperature were investigated via chemical oxygen demand (COD) and phenol removal efficiencies. Optimal treatment efficiency was attained at pH of 4, Fe/C dosage of 40 g/L, treatment time of 360 minutes and temperature of 25°C. After the internal electrolysis process, the values of COD, BOD5, and phenol of the wastewater were 6500, 4850 and 0.1 mg/L, respectively.</p>
</abstract>

Untreated coking effluent presents a great challenge for sustainable development of the steel industry and environment preservation. In this study, an internal micro-electrolysis method using Fe/C materials was employed for pretreatment of real coking wastewater with high mass concentration. The Fe/C materials were prepared by Fe powder and graphite powder; and the characteristics of surface morphology, structure, composition of the synthesized materials were examined by Scanning electron microscopy (SEM), X-ray diffraction (XRD) and Energy Dispersive X-ray Spectroscopy (EDS). The effects of factors namely dosage of Fe/C material, treatment time, initial pH and temperature were investigated via chemical oxygen demand (COD) and phenol removal efficiencies. Optimal treatment efficiency was attained at pH of 4, Fe/C dosage of 40 g/L, treatment time of 360 minutes and temperature of 25°C. After the internal electrolysis process, the values of COD, BOD5, and phenol of the wastewater were 6500, 4850 and 0.1 mg/L, respectively.

Internal Micro-electrolysis Using Fe/C Material for Pre-Treatment of Concentrated Coking Wastewater

Thai Nguyen University of Education, Thai Nguyen University

Center of Excellence for Green Energy and Environmental Nanomaterials

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Untreated coking effluent presents a great challenge for sustainable development of the steel industry and environment preservation. In this study, an internal...

Internal Micro-electrolysis Using Fe/C Material for Pre-Treatment of Concentrated Coking Wastewater

Data publikacji: 15 lip 2021

Zakres stron: 41 - 46

DOI: https://doi.org/10.2478/pjct-2021-0015

Słowa kluczowe
internal micro-electrolysis, Fe/C material, wastewater treatment, coking wastewater

© 2021 Van Tu Nguyen et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Internal Micro-electrolysis Using Fe/C Material for Pre-Treatment of Concentrated Coking Wastewater

Data publikacji: 15 lip 2021

Zakres stron: 41 - 46

DOI: https://doi.org/10.2478/pjct-2021-0015

Słowa kluczoweinternal micro-electrolysis, Fe/C material, wastewater treatment, coking wastewater

© 2021 Van Tu Nguyen et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
internal micro-electrolysis, Fe/C material, wastewater treatment, coking wastewater