Otwarty dostęp

Nonlinear Optimal Control of Magnetically Geared Induction Motors

G. Rigatos

G. Rigatos

Unit of Industrial Automation, Industrial Systems Institute, Athena RCRion Patras, Greece
Wyszukaj tego autora
Sciendo|Google Scholar
Rigatos, G.
, 
P. Siano

P. Siano

  • Department of Management and Innovation Systems, University of SalernoFisciano, Italy
  • Department of Electrical Engineering, University of JohannesburgJohannesburg, South Africa
Wyszukaj tego autora
Sciendo|Google Scholar
Siano, P.
, 
M. Abbaszadeh

M. Abbaszadeh

Department of ECS Engineering, Rensselaer Polytechnic InstituteNew York, USA
Wyszukaj tego autora
Sciendo|Google Scholar
Abbaszadeh, M.
, 
G. Cuccurullo

G. Cuccurullo

Depatment of Industrial Engineering, University of SalernoFisciano, Italy
Wyszukaj tego autora
Sciendo|Google Scholar
Cuccurullo, G.
 oraz 
K. Ouahada

K. Ouahada

Department of Electrical Engineering, University of JohannesburgJohannesburg, South Africa
Wyszukaj tego autora
Sciendo|Google Scholar
Ouahada, K.
  
19 sie 2025
Nonlinear Optimal Control of Magnetically Geared Induction Motors's Cover Image
O artykule
Poprzedni artykuł
Następny artykuł
Zacytuj
Pobierz okładkę
Kategoria artykułu: Research paper
Data publikacji: 19 sie 2025
Zakres stron: 227 - 240
Otrzymano: 19 lut 2025
Przyjęty: 07 maj 2025
DOI: https://doi.org/10.2478/pead-2025-0009
Słowa kluczowe
© 2025 G. Rigatos et al., published by Sciendo
This work is licensed under the Creative Commons Attribution 4.0 International License.

Figure 1.

Diagram of the traction system of an EV based on a MGIM. EV, electric vehicle; MGIM, magnetically geared induction motor.
Diagram of the traction system of an EV based on a MGIM. EV, electric vehicle; MGIM, magnetically geared induction motor.

Figure 2.

Diagram of the control scheme for the MGIM. MGIM, magnetically geared induction motor.
Diagram of the control scheme for the MGIM. MGIM, magnetically geared induction motor.

Figure 3.

Tracking of setpoint 1 by the MGIM with the use of non-linear optimal control: (a) convergence of state variables x1 to x3 (blue lines) to the associated setpoints (red lines) and estimated values provided by Kalman Filtering (b) convergence of state variables x4 to x6 (blue lines) to the associated setpoints (red lines) and estimated values provided by Kalman Filtering. MGIM, magnetically geared induction motor.
Tracking of setpoint 1 by the MGIM with the use of non-linear optimal control: (a) convergence of state variables x1 to x3 (blue lines) to the associated setpoints (red lines) and estimated values provided by Kalman Filtering (b) convergence of state variables x4 to x6 (blue lines) to the associated setpoints (red lines) and estimated values provided by Kalman Filtering. MGIM, magnetically geared induction motor.

Figure 4.

Tracking of setpoint 1 by the MGIM with the use of non-linear optimal control: (a) variations of the control inputs u1 and u2 (blue lines) (b) variation of the tracking error variables ei, i = 1,…,6 associated with the state variables xi, i = 1,…,6. MGIM, magnetically geared induction motor.
Tracking of setpoint 1 by the MGIM with the use of non-linear optimal control: (a) variations of the control inputs u1 and u2 (blue lines) (b) variation of the tracking error variables ei, i = 1,…,6 associated with the state variables xi, i = 1,…,6. MGIM, magnetically geared induction motor.

Figure 5.

Tracking of setpoint 2 by the MGIM with the use of non-linear optimal control: (a) convergence of state variables x1 to x3 (blue lines) to the associated setpoints (red lines) and estimated values provided by Kalman Filtering (b) convergence of state variables x4 to x6 (blue lines) to the associated setpoints (red lines) and estimated values provided by Kalman Filtering. MGIM, magnetically geared induction motor.
Tracking of setpoint 2 by the MGIM with the use of non-linear optimal control: (a) convergence of state variables x1 to x3 (blue lines) to the associated setpoints (red lines) and estimated values provided by Kalman Filtering (b) convergence of state variables x4 to x6 (blue lines) to the associated setpoints (red lines) and estimated values provided by Kalman Filtering. MGIM, magnetically geared induction motor.

Figure 6.

Tracking of setpoint 2 by the MGIM with the use of non-linear optimal control: (a) variations of the control inputs u1 and u2 (blue lines) (b) variation of the tracking error variables ei, i = 1,…,6 associated with the state variables xi, i = 1,…,6. MGIM, magnetically geared induction motor.
Tracking of setpoint 2 by the MGIM with the use of non-linear optimal control: (a) variations of the control inputs u1 and u2 (blue lines) (b) variation of the tracking error variables ei, i = 1,…,6 associated with the state variables xi, i = 1,…,6. MGIM, magnetically geared induction motor.

Tracking RMSE for the MGIM in the disturbance-free case

RMSEx1 RMSEx2 RMSEx3 RMSEx4 RMSEx5 RMSEx6
Test1 0.0052 0.0026 0.0064 0.0037 0.0001 0.0002
Test2 0.0041 0.0020 0.0064 0.0063 0.0002 0.0003

Tracking RMSE for the MGIM in the case of disturbances

Δa% RMSEx1 RMSEx2 RMSEx3 RMSEx4 RMSEx5 RMSEx6
0% 0.0052 0.0026 0.0064 0.0037 0.0001 0.0002
10% 0.0057 0.0029 0.0064 0.0014 0.0001 0.0003
20% 0.0062 0.0031 0.0064 0.0007 0.0001 0.0003
30% 0.0066 0.0033 0.0064 0.0027 0.0002 0.0001
40% 0.0069 0.0035 0.0065 0.0046 0.0002 0.0003
50% 0.0073 0.0036 0.0065 0.0064 0.0002 0.0003
60% 0.0075 0.0038 0.0065 0.0081 0.0002 0.0003

Parameters of the MGIM dynamic model_

Parameter Definition
ωm, ωL Angular speed of the motor, load
Jm, JL, Jg Moment of inertia of the rotor, load, gear
Te, TL, Tg Torque of the rotor, load, gear
ϕ Angle denoting the speed difference between rotor and load
Gr Transmission ratio of the magnetic gear
Bm, BL, Bg Friction coefficient at rotor, load and gear
po, pm Number of ferromagnetic pole pieces and air gaps
nL Sum of ferromagnetic pole pieces and air gaps
isd, isq d,q axis components of the IM stator currents
Rs, Rr Resistance of the IM’s stator, rotor
ψrd, ψrq d,q axis components of the IM rotor flux
Ls, Lr Inductance of the IM’s stator, rotor
M Mutual inductance between IM’s stator and rotor
np Number of poles of the IM’s stator
ρ Orientation of the IM’s magnetic field
α, β, γ α=RrLr,β=MσLsLs,γ=M2RrσLsLr2+RsσLs \alpha = {{{R_r}} \over {{L_r}}},\beta = {M \over {\sigma {L_s}{L_s}}},\gamma = {{{M^2}{R_r}} \over {\sigma {L_s}{L_r}^2}} + {{{R_s}} \over {\sigma {L_s}}}
μ, σ μ=npMJ,σ=1−M2LsLr \mu = {{{n_p}M} \over J},\sigma = 1 - {{{M^2}} \over {{L_s}{L_r}}}
Język:
Angielski
Częstotliwość wydawania:
1 razy w roku
Dziedziny czasopisma:
Informatyka, Sztuczna inteligencja, Inżynieria, Elektrotechnika, Elektronika
Kanał RSS czasopisma