<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Accurate current polarity detection is a major issue for successful compensation of dead-time distortion in pulse-width-modulated (PWM) voltage source inverter. The present study is concerned with the concept of shift in current-zero-crossing due to dead-time distortion compensation that results in error in current polarity detection and thus causes a problem with regard to the successful continuation of compensation. The phenomenon is analysed in detail, along with its dependence on different factors. The proposed concept is validated in digital simulation and also through experimental verification. The study also recommends the possible correction to be incorporated in view of such zero-crossing shift for achieving proper compensation, especially in case of current-sensor-less compensation techniques.</p>
</abstract>

Accurate current polarity detection is a major issue for successful compensation of dead-time distortion in pulse-width-modulated (PWM) voltage source inverter. The present study is concerned with the concept of shift in current-zero-crossing due to dead-time distortion compensation that results in error in current polarity detection and thus causes a problem with regard to the successful continuation of compensation. The phenomenon is analysed in detail, along with its dependence on different factors. The proposed concept is validated in digital simulation and also through experimental verification. The study also recommends the possible correction to be incorporated in view of such zero-crossing shift for achieving proper compensation, especially in case of current-sensor-less compensation techniques.

Current-zero-crossing Shift for Compensation of Dead-time Distortion in Pulse-width-modulated Voltage Source Inverter

Power Electronics and Drives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Accurate current polarity detection is a major issue for successful compensation of dead-time distortion in pulse-width-modulated (PWM) voltage source...

Current-zero-crossing Shift for Compensation of Dead-time Distortion in Pulse-width-modulated Voltage Source Inverter

Data publikacji: 21 mar 2023

Zakres stron: 84 - 99

Otrzymano: 22 gru 2022

Przyjęty: 24 lut 2023

DOI: https://doi.org/10.2478/pead-2023-0007

Słowa kluczowe
compensation, current polarity, current-zero-crossing shift, dead-time distortion, PWM VSI

© 2023 Dipankar Chatterjee et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Current-zero-crossing Shift for Compensation of Dead-time Distortion in Pulse-width-modulated Voltage Source Inverter

Data publikacji: 21 mar 2023

Zakres stron: 84 - 99

Otrzymano: 22 gru 2022

Przyjęty: 24 lut 2023

DOI: https://doi.org/10.2478/pead-2023-0007

Słowa kluczowecompensation, current polarity, current-zero-crossing shift, dead-time distortion, PWM VSI

© 2023 Dipankar Chatterjee et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
compensation, current polarity, current-zero-crossing shift, dead-time distortion, PWM VSI