<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Concrete cracks in structures such as water tanks and nuclear power stations cause anxiety to owners, contractors and engineers. These cracks may significantly increase the structure’s permeability and thus increase leakage, reduce durability, and eventually lead to loss of structural functionality. Therefore it is important to minimize their occurrence and size. To identify effective ways of minimizing cracking in young concrete segments, a parametric study was conducted using the finite element method (FEM). Parameters considered include casting sequence, joint position, wall height, and cooling. The study examined continuous and jumped casting approaches to the casting of a cylindrical reinforced concrete tank for a sewage-treatment plant, with and without the application of the ‘kicker’ technique in which the lower part of the wall is cast with the slab. The main cause of cracking is thermal change and restraint imposed by adjacent older structures, and the FEM predictions agree well with experimental observations. Continuous casting is most effective at minimizing cracking because it creates only two contact edges between newly cast and existing structures producing the lowest level of restraint. The kicker technique is shown to be very effective for reducing restraint and consider rephasing.</p>
</abstract>

Concrete cracks in structures such as water tanks and nuclear power stations cause anxiety to owners, contractors and engineers. These cracks may significantly increase the structure’s permeability and thus increase leakage, reduce durability, and eventually lead to loss of structural functionality. Therefore it is important to minimize their occurrence and size. To identify effective ways of minimizing cracking in young concrete segments, a parametric study was conducted using the finite element method (FEM). Parameters considered include casting sequence, joint position, wall height, and cooling. The study examined continuous and jumped casting approaches to the casting of a cylindrical reinforced concrete tank for a sewage-treatment plant, with and without the application of the ‘kicker’ technique in which the lower part of the wall is cast with the slab. The main cause of cracking is thermal change and restraint imposed by adjacent older structures, and the FEM predictions agree well with experimental observations. Continuous casting is most effective at minimizing cracking because it creates only two contact edges between newly cast and existing structures producing the lowest level of restraint. The kicker technique is shown to be very effective for reducing restraint and consider rephasing.

Reducing Thermal Crack Risks Caused by Restraint in Young Concrete - A Case Study on Walls of Water Tanks

Professor, Lulea University of Technology

Nordic Concrete Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Concrete cracks in structures such as water tanks and nuclear power stations cause anxiety to owners, contractors and engineers. These cracks may significantly...

Reducing Thermal Crack Risks Caused by Restraint in Young Concrete - A Case Study on Walls of Water Tanks

Data publikacji: 11 lip 2022

Zakres stron: 41 - 54

Otrzymano: 11 lut 2022

Przyjęty: 28 mar 2022

DOI: https://doi.org/10.2478/ncr-2022-0001

Słowa kluczowe
Restraint cracks, early age, casting sequence, water tank walls

© 2022 Majid Al-Gburi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Reducing Thermal Crack Risks Caused by Restraint in Young Concrete - A Case Study on Walls of Water Tanks

Data publikacji: 11 lip 2022

Zakres stron: 41 - 54

Otrzymano: 11 lut 2022

Przyjęty: 28 mar 2022

DOI: https://doi.org/10.2478/ncr-2022-0001

Słowa kluczoweRestraint cracks, early age, casting sequence, water tank walls

© 2022 Majid Al-Gburi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
Restraint cracks, early age, casting sequence, water tank walls