Theoretical Positioning Accuracy for Serial and Parallel Kinematic Structure

[1] Knapp, W. (2002). Measurement uncertainty and machine tool testing. CIRP Annals - Manufacturing Technology, 51 (1), 459-462.10.1016/S0007-8506(07)61560-1Search in Google Scholar

[2] Schwenke, H. et al. (2008). Geometric error measurement and compensation of machines-An update. CIRP Annals - Manufacturing Technology, 57 (2), 660-675.10.1016/j.cirp.2008.09.008Search in Google Scholar

[3] Sartori, S., Zhang, G.X. (1995). Geometric error measurement and compensation of machines. CIRP Annals - Manufacturing Technology, 44 (2), 599-609.10.1016/S0007-8506(07)60507-1Search in Google Scholar

[4] Weckenmann, A. (1982). The accuracy of coordinate measuring machines. In IMEKO IX World Congress, Vol. V/I, 266-275. (preprints)Search in Google Scholar

[5] Balsamo, A., Meda, A. (2006). Geometrical error compensation of coordinate measuring systems. Nanotechnology and Precision Engineering, 4, 83-91.Search in Google Scholar

[6] Kušnerova, M., Valiček, J., Harničarova, M., Hryniewicz, T., Rokosz, K., Palkova, Z., Vaclavik, V., Řepka, M., Bendova, M. (2013). A Proposal for simplifying the method of evaluation of uncertainties in measurement result. Measurement Science Review, 13 (1), 1-6.10.2478/msr-2013-0007Search in Google Scholar

[7] Ostrowska, K, Gaska, A., Sladek, J. (2014). Determining the uncertainty of measurement with the use of a Virtual Coordinate Measuring Arm. The International Journal of Advanced Manufacturing Technology, 71 (1-4), 529-537.10.1007/s00170-013-5486-8Search in Google Scholar

[8] Aguado, S., Santolaria, J., Samper, D., Aguilar, J.J. (2013). Influence of measurement noise and laser arrangement on measurement uncertainty of laser tracker multilateration in machine tool volumetric verification. Precision Engineering, 37 (4), 929-943.10.1016/j.precisioneng.2013.03.006Search in Google Scholar

[9] Halaj, M., Gros, P., Kurekova, E. (2005). Testing of the repeated accuracy of positioning of the plasma cutting head. In Instruments and Control : XXX. ASR´05 Seminar. Ostrava, Czech Republic: VSB - Technical University of Ostrava, 175-182.Search in Google Scholar

[10] Gros, P., Kurekova, E. (2005). Advanced experiments design for the three-torch plasma cutter testing. In Measurement 2005 : 5th International Conference on Measurement. Bratislava, SR: IMS SAS, 530-533.Search in Google Scholar

[11] Palenčar, R., Halaj, M., Kurekova, E. (2007). Evaluation of the positional deviation of numerically controlled axes. Measurement Science Review, 7 (1), 27-30.Search in Google Scholar

[12] Loebl, T., Kurekova, E, Palenčar, R. (2009). Possibilities of improving of positional precision of machine tools with linear axes. In IMEKO XIX World Congress : Fundamental and Applied Metrology, 1827-1831.Search in Google Scholar

[13] Olazagoitia, J.L., Wyatt, S. (2007). New PKM Tricept T9000 and its application to flexible manufacturing at aerospace industry. SAE Technical Paper 2007-01-3820.10.4271/2007-01-3820Search in Google Scholar

[14] Siciliano, B. (1999). The Tricept robot: Inverse kinematics, manipulability analysis and closed-loop direct kinematics algorithm. Robotica, 17 (4), 437-445.10.1017/S0263574799001678Search in Google Scholar

[15] Pritschow, G. (2000). Parallel kinematic machines (PKM) - limitations and new solutions. CIRP Annals - Manufacturing Technology, 49 (1), 275-280.10.1016/S0007-8506(07)62945-XSearch in Google Scholar

[16] Besnard, S., Khalil, W. (2001) Identifiable parameters for parallel robots kinematic calibration. In IEEE International Conference on Robotics and Automation, Vol. 3, 2859-2865.10.1109/ROBOT.2001.933055Search in Google Scholar

[17] Merlet, J.P. (2006). Parallel Robots : Second Edition. Springer.Search in Google Scholar

[18] PKM Tricept, http://www.pkmtricept.com.Search in Google Scholar

[19] Kollath, Ľ., Halaj, M., Kurekova, E. (2009) Positioning accuracy of non-conventional production machines. In IMEKO XIX World Congress : Fundamental and Applied Metrology, 2099-2102.Search in Google Scholar

[20] Omachelova, M., Martišovitš, I., Kurekova, E., Kollath, Ľ. (2013). Analytical expression of the lengths of tricept telescopic rods ejection. In Instruments and Control : XXXVII. Seminar ASR´13. Ostrava, Czech Republic: VSB - Technical University of Ostrava, 175-182.Search in Google Scholar

[21] Omachelova, M., Kurekova, E., Halaj, M., Martišovitš, I. (2014). Theoretical aspects of control of the Tricept type parallel kinematic structure. In 15th International Carpathian Control Conference. IEEE, 393-397.10.1109/CarpathianCC.2014.6843634Search in Google Scholar

[22] Onderova, I., Kollath, L. (2014). Testing and verification of selected technological parameters of the PKS. In 15th International Carpathian Control Conference. IEEE, 398-40210.1109/CarpathianCC.2014.6843635Search in Google Scholar