This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Kowalczyk K, Jabłońska M, Rusz S, Junak G. Influence of recrystallization annealing on the properties and structure of low-carbon ferritic steel IF. Arch Metall Mater 2018; 63(4): 1957–61. doi:10.24425/amm.2018.125130.KowalczykKJabłońskaMRuszSJunakG.Influence of recrystallization annealing on the properties and structure of low-carbon ferritic steel IF.2018;63(4):1957–61. doi:10.24425/amm.2018.125130.Open DOISearch in Google Scholar
Bhadeshia HKDH. Atomic mechanism of the bainite transformation. J Heat Treatm Mat. 2017; 72(6): 340–345. doi:10.3139/105.110338.BhadeshiaHKDH.Atomic mechanism of the bainite transformation..2017;72(6):340–345. doi:10.3139/105.110338.Open DOISearch in Google Scholar
Zhang FC, Wang TS, Zhang P, Zhang CL, Lv B, Zhang M, Zhang YZ. A novel method for the development of a low-temperature bainitic microstructure in the surface layer of low-carbon steel. Scr Mater 2008; 59: 294–296. doi:10.1016/j.scriptamat.2008.03.024.ZhangFCWangTSZhangPZhangCLLvBZhangMZhangYZ.A novel method for the development of a low-temperature bainitic microstructure in the surface layer of low-carbon steel.2008;59:294–296. doi:10.1016/j.scriptamat.2008.03.024.Open DOISearch in Google Scholar
Królicka A, Żak A, Kuziak R, Radwański K, Ambroziak A. Decomposition mechanisms of continuously cooled bainitic rail in the critical heat-affected zone of a flash-butt welded joints. Mater Sci-Pol 2021; 39(4): 615–25. doi:10.2478/msp-2022-0002.KrólickaAŻakAKuziakRRadwańskiKAmbroziakA.Decomposition mechanisms of continuously cooled bainitic rail in the critical heat-affected zone of a flash-butt welded joints.2021;39(4):615–25. doi:10.2478/msp-2022-0002.Open DOISearch in Google Scholar
Zhu Z, Han J, Li H, Lu C. High temperature processed high Nb X80 steel with excellent heat-affected zone toughness. Mater Lett 2016; 163: 171–174. doi:10.1016/j.matlet.2015.10.071.ZhuZHanJLiHLuC.High temperature processed high Nb X80 steel with excellent heat-affected zone toughness.2016;163:171–174. doi:10.1016/j.matlet.2015.10.071.Open DOISearch in Google Scholar
Avishan B, Talebi P, Tekeli S, Yazdani S. Producing nanobainite on carburized surface of a low-carbon low-alloy steel. JMEPEG 2023; 32: 211–220. doi:10.1007/s11665-022-07096-6.AvishanBTalebiPTekeliSYazdaniS.Producing nanobainite on carburized surface of a low-carbon low-alloy steel.2023;32:211–220. doi:10.1007/s11665-022-07096-6.Open DOISearch in Google Scholar
Garcia-Mateo C, Caballero FG, Sourmail T, Smanio V, Garcia de Andres C. Industrialised nanocrystalline bainitic steels. Design approach. Int J Mater Res 2014; 105(8): 725–734. doi:10.3139/146.111090.Garcia-MateoCCaballeroFGSourmailTSmanioVGarcia de AndresC.Industrialised nanocrystalline bainitic steels. Design approach.2014;105(8):725–734. doi:10.3139/146.111090.Open DOISearch in Google Scholar
Królicka A, Janik A, Żak A, Radwański K. The qualitative–quantitative approach to microstructural characterization of nanostructured bainitic steels using electron microscopy methods. Mater. Sci.-Pol 2021; 39(2): 188–99. doi:10.2478/msp-2021-0017.KrólickaAJanikAŻakARadwańskiK.The qualitative–quantitative approach to microstructural characterization of nanostructured bainitic steels using electron microscopy methods.2021;39(2):188–99. doi:10.2478/msp-2021-0017.Open DOISearch in Google Scholar
Caballero FG., Bhadeshia HKDH, Mawella, KJA, Jones DG, Brown P. Design of novel high strength bainitic steels: Part 2. Mater Sci Technol. 2001; 17: 517–522. doi:10.1179/026708301101510357CaballeroFG.BhadeshiaHKDHMawellaKJAJonesDGBrownP.Design of novel high strength bainitic steels: Part 2..2001;17:517–522. doi:10.1179/026708301101510357Open DOISearch in Google Scholar
Sourmail T, Garcia-Mateo C, Caballero FG, Morales-Rivas L, Rementeria R, Kuntz M. Tensile ductility of nanostructured bainitic steels: Influence of retained austenite stability. Metals 2017; 7: 31–37. doi:10.3390/met7010031SourmailTGarcia-MateoCCaballeroFGMorales-RivasLRementeriaRKuntzM.Tensile ductility of nanostructured bainitic steels: Influence of retained austenite stability.2017;7:31–37. doi:10.3390/met7010031Open DOISearch in Google Scholar
Sourmail T, Caballero FG, Garcia-Mateo C, Smanio V, Ziegler C, Kuntz M, Elvira R, Leiro A, Vuorinen E, Teeri T. Evaluation of potential of high Si high C steel nanostructured bainite for wear and fatigue applications. Mater Sci Technol 2013; 29(10): 1166–1173. doi:10.1179/1743284713Y.0000000242.SourmailTCaballeroFGGarcia-MateoCSmanioVZieglerCKuntzMElviraRLeiroAVuorinenETeeriT.Evaluation of potential of high Si high C steel nanostructured bainite for wear and fatigue applications.2013;29(10):1166–1173. doi:10.1179/1743284713Y.0000000242.Open DOISearch in Google Scholar
Du Y, Wang X, Zhang D, Wang X, Ju C, Jiang B. A superior strength and sliding wear resistance combination of ductile iron with nanobainitic matrix. J Mater Res Technol 2021; 11: 1175–1183. doi:10.1016/j.jmrt.2021.01.104.DuYWangXZhangDWangXJuCJiangB.A superior strength and sliding wear resistance combination of ductile iron with nanobainitic matrix.2021;11:1175–1183. doi:10.1016/j.jmrt.2021.01.104.Open DOISearch in Google Scholar
Rios-Diez, O, Aristiza’bal-Sierra R, Serna-Giraldo C, Eres-Castellanos A, Garcia-Mateo C. Wear behavior of nanostructured carboaustempered cast steels under rolling-sliding conditions. J Mater Res Technol 2021; 11: 1343–1355. doi:10.1016/j.jmrt.2021.01.094.Rios-DiezOAristiza’bal-SierraRSerna-GiraldoCEres-CastellanosAGarcia-MateoC.Wear behavior of nanostructured carboaustempered cast steels under rolling-sliding conditions.2021;11:1343–1355. doi:10.1016/j.jmrt.2021.01.094.Open DOISearch in Google Scholar
Sukumar G, Senthil PP, Reddy PRS, Singh BB, Ramakrishna B, Kumar KS, Madhu V. Ballistic efficacy of carbide free high strength nano-structured bainitic armour steels. Def Sci J. 2023; 73(2): 131–139. doi:10.14429/dsj.73.18634.SukumarGSenthilPPReddyPRSSinghBBRamakrishnaBKumarKSMadhuV.Ballistic efficacy of carbide free high strength nano-structured bainitic armour steels..2023;73(2):131–139. doi:10.14429/dsj.73.18634.Open DOISearch in Google Scholar
Caballero FG, Bhadeshia HKDH, Mawella KJA, Jones DG, Brown P. Very strong low temperature bainite. Mater Sci Technol 2002; 18: 279–284. doi:10.1179/026708301225000725.CaballeroFGBhadeshiaHKDHMawellaKJAJonesDGBrownP.Very strong low temperature bainite.2002;18:279–284. doi:10.1179/026708301225000725.Open DOISearch in Google Scholar
Garcia-Mateo C, Caballero FG. Design of carbide-free low-temperature ultra high strength bainitic steels. Int J Mat Res 2007; 98(2): 137–143. doi:10.3139/146.101440Garcia-MateoCCaballeroFG.Design of carbide-free low-temperature ultra high strength bainitic steels.2007;98(2):137–143. doi:10.3139/146.101440Open DOISearch in Google Scholar
Garcia-Mateo C, Caballero FG, Sourmail T, Cornide J, Smanio V, Elvira R. Composition Design of nanocrystalline bainitic steels by diffusionless solid reaction. Met Mater Int. 2014; 20(3): 405–415. doi:10.1007/s12540-014-3002-9.Garcia-MateoCCaballeroFGSourmailTCornideJSmanioVElviraR.Composition Design of nanocrystalline bainitic steels by diffusionless solid reaction..2014;20(3):405–415. doi:10.1007/s12540-014-3002-9.Open DOISearch in Google Scholar
Wojtaszek M, Lisiecki Ł, Łukaszek - Sołek A, Korpała G, Zyguła K, Śleboda T, Jabłońska MB, Prahl U. Application of processing maps and numerical modelling for identification of parameters and limitations of hot forging process of 80MnSi8-6 steel. Arch Civ Mech Eng. 2023; 23(4): 1–22. doi:10.1007/s43452-023-00783-8.WojtaszekMLisieckiŁŁukaszek - SołekAKorpałaGZygułaKŚlebodaTJabłońskaMBPrahlU.Application of processing maps and numerical modelling for identification of parameters and limitations of hot forging process of 80MnSi8-6 steel..2023;23(4):1–22. doi:10.1007/s43452-023-00783-8.Open DOISearch in Google Scholar
Sourmai T. Bainite and superbainite in long products and forged applications. HTM. 2017; 72(6): 371–378. doi:10.3139/105.110342.SourmaiT.Bainite and superbainite in long products and forged applications..2017;72(6):371–378. doi:10.3139/105.110342.Open DOISearch in Google Scholar
Leiro A, Vuorinen E, Sundin KG, Prakash B. Wear of nano-structured carbide-free bainitic steels under dry rolling-sliding conditions. Wear. 2013; 298–299: 42–47. doi:10.1016/j.wear.2012.11.064.LeiroAVuorinenESundinKGPrakashB.Wear of nano-structured carbide-free bainitic steels under dry rolling-sliding conditions..2013;298–299:42–47. doi:10.1016/j.wear.2012.11.064.Open DOISearch in Google Scholar
Jabłońska MB, Śmiglewicz A, Niewielski G. The effect of strain rate on the mechanical properties and microstructure of the high-Mn steel after dynamic deformation tests. Arch Metall Mater. 2015; 60(2): 577–80. doi:10.1515/amm-2015-017.JabłońskaMBŚmiglewiczANiewielskiG.The effect of strain rate on the mechanical properties and microstructure of the high-Mn steel after dynamic deformation tests..2015;60(2):577–80. doi:10.1515/amm-2015-017.Open DOISearch in Google Scholar
Agha A, Abu-Farha F. A Method for Measuring In-Plane Forming Limit Curves Using 2D Digital Image Correlation. SAE Int J Mater Manf. 2023; 16(3): 281–291. doi:10.4271/05-16-03-0019.AghaAAbu-FarhaF.A Method for Measuring In-Plane Forming Limit Curves Using 2D Digital Image Correlation..2023;16(3):281–291. doi:10.4271/05-16-03-0019.Open DOISearch in Google Scholar
Szalai S, Csótár H, Kurhan D, Németh A, Sysyn M, Fischer S. Testing of lubricants for dic tests to measure the forming limit diagram of aluminum thin sheet materials. Infrastructures. 2023; 8: 1–14. doi:10.3390/infrastructures8020032.SzalaiSCsótárHKurhanDNémethASysynMFischerS.Testing of lubricants for dic tests to measure the forming limit diagram of aluminum thin sheet materials..2023;8:1–14. doi:10.3390/infrastructures8020032.Open DOISearch in Google Scholar
King M, Rahimi S. Optimisation of sample geometry for thermo-mechanical testing of precipitation hardenable nickel-based superalloys with an ETMT machine. Strain. 2023; e12458: 1–18. doi:10.1111/str.12458.KingMRahimiS.Optimisation of sample geometry for thermo-mechanical testing of precipitation hardenable nickel-based superalloys with an ETMT machine..2023; e12458:1–18. doi:10.1111/str.12458.Open DOISearch in Google Scholar
Van der Heijde JH, Samad WA. The effect of specimen thickness on the lüders phenomena in aisi 1524 steel alloy: Experimental observations using DIC. Exp Mech. 2023; 63: 885–896. doi:10.1007/s11340-023-00951-0.Van der HeijdeJHSamadWA.The effect of specimen thickness on the lüders phenomena in aisi 1524 steel alloy: Experimental observations using DIC..2023;63:885–896. doi:10.1007/s11340-023-00951-0.Open DOISearch in Google Scholar
Champolivier E, Brancherie D, Feissel P, Gaied S, Canourgues J-F. Experimental characterization of forming behavior of 3rd GEN AHSS. IOP Conf. Series: Materials Science and Engineering 2023. 1284, 012077, 1–9. doi:10.1088/1757-899X/1284/1/012077.ChampolivierEBrancherieDFeisselPGaiedSCanourguesJ-F..IOP Conf. Series: Materials Science and Engineering 2023.1284, 012077,1–9. doi:10.1088/1757-899X/1284/1/012077.Open DOISearch in Google Scholar
He T, Liu L, Makeev A, Shonkwiler B. Characterization of stress-strain behaviour of composites using digital image correlation and finite element analysis. Compos Struct. 2016; 140: 84–93. doi:10.1016/j.compstruct.2015.12.018.HeTLiuLMakeevAShonkwilerB.Characterization of stress-strain behaviour of composites using digital image correlation and finite element analysis..2016;140:84–93. doi:10.1016/j.compstruct.2015.12.018.Open DOISearch in Google Scholar
Roux E, Bouchard PO. On the interest of using full field measurements in ductile damage model calibration. Int J Solids Struct 2015; 72: 50. doi:10.1016/j.ijsolstr.2015.07.011.RouxEBouchardPO.On the interest of using full field measurements in ductile damage model calibration.2015;72:50. doi:10.1016/j.ijsolstr.2015.07.011.Open DOISearch in Google Scholar
Sutton MA, Orteu JJ, Schreier H. Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications. Springer Science & Business Media; 2009. 332 p.SuttonMAOrteuJJSchreierH..Springer Science & Business Media;2009.332p.Search in Google Scholar
Dumoulin S, Tabourot L, Chappuis C, Vacher P, Arrieux R. Determination of the equivalent stress– equivalent strain relationship of a copper sample under tensile loading. J Mater Process. 2003; 133: 79. doi:10.1016/S0924-0136(02)00247-9.DumoulinSTabourotLChappuisCVacherPArrieuxR.Determination of the equivalent stress– equivalent strain relationship of a copper sample under tensile loading..2003;133:79. doi:10.1016/S0924-0136(02)00247-9.Open DOISearch in Google Scholar
Lisiecka-Graca P, Majta J, Muszka K. Full-field strain measurement and numerical analysis of a microal-loyed steel subjected to deformation with strain path change. Materials. 2020; 11: 1–17. doi:10.3390/ma13235543.Lisiecka-GracaPMajtaJMuszkaK.Full-field strain measurement and numerical analysis of a microal-loyed steel subjected to deformation with strain path change..2020;11:1–17. doi:10.3390/ma13235543.Open DOISearch in Google Scholar
Christiansen P, Hattel JH, Bay N, Martins PAF. Modelling of damage during hot forging of ingots: international conference on modelling and simulation of metallurgical processes in steelmaking. STEELSIM 2013 – The 5th International Conference. 2013.ChristiansenPHattelJHBayNMartinsPAF..STEELSIM 2013 – The 5th International Conference.2013.Search in Google Scholar