Logowanie
Zarejestruj się
Zresetuj hasło
Publikuj i Dystrybuuj
Rozwiązania Wydawnicze
Rozwiązania Dystrybucyjne
Dziedziny
Architektura i projektowanie
Bibliotekoznawstwo i bibliologia
Biznes i ekonomia
Chemia
Chemia przemysłowa
Filozofia
Fizyka
Historia
Informatyka
Inżynieria
Inżynieria materiałowa
Językoznawstwo i semiotyka
Kulturoznawstwo
Literatura
Matematyka
Medycyna
Muzyka
Nauki farmaceutyczne
Nauki klasyczne i starożytne studia bliskowschodnie
Nauki o Ziemi
Nauki o organizmach żywych
Nauki społeczne
Prawo
Sport i rekreacja
Studia judaistyczne
Sztuka
Teologia i religia
Zagadnienia ogólne
Publikacje
Czasopisma
Książki
Materiały konferencyjne
Wydawcy
Blog
Kontakt
Wyszukiwanie
EUR
USD
GBP
Polski
English
Deutsch
Polski
Español
Français
Italiano
Koszyk
Home
Czasopisma
Materials Science-Poland
Tom 41 (2023): Zeszyt 4 (December 2023)
Otwarty dostęp
Mechanical and corrosion properties of highly porous Ta-Nb-Sn alloy for intervertebral disc in spinal applications
Berk Atay
Berk Atay
oraz
Ilven Mutlu
Ilven Mutlu
| 21 mar 2024
Materials Science-Poland
Tom 41 (2023): Zeszyt 4 (December 2023)
O artykule
Poprzedni artykuł
Następny artykuł
Abstrakt
Artykuł
Ilustracje i tabele
Referencje
Autorzy
Artykuły w tym zeszycie
Podgląd
PDF
Zacytuj
Udostępnij
Data publikacji:
21 mar 2024
Zakres stron:
95 - 106
Otrzymano:
01 gru 2023
Przyjęty:
15 lut 2024
DOI:
https://doi.org/10.2478/msp-2023-0048
Słowa kluczowe
metal foam
,
Ta-Nb-Sn
,
spinal implant
,
intervertebral disc
,
powder metallurgy
© 2023 Berk Atay et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Fig. 1.
SEM images of (a) Ta powder, (b) Nb powder, (c) Sn powder, and (d) carbamide powder
Fig. 2.
(a) Photograph of the foam, (b) SEM image of the macro-pores, (c) SEM image of the cell wall (low magnification), and (d) SEM image of the cell wall (high magnification)
Fig. 3.
XRD patterns of the (a) Ta powder, (b) Nb powder, (c) Sn powder and (d) sintered alloy
Fig. 4.
Effect of (a) Nb content and (b) Sn content of the alloy on the Young’s modulus
Fig. 5.
Effect of porosity on (a) Young’s modulus and (b) compressive stress-strain diagram
Fig. 6.
Variation of the open circuit potential value with (a) the Nb content and (b) the Sn content of the alloy
Fig. 7.
Effect of (a) Nb content and (b) Sn content of the alloy on the Tafel curves of the samples
Fig. 8.
Effect of (a) Nb content of the alloy, (b) Sn content of the alloy, and (c) porosity content on the polarization resistance and corrosion rate
Fig. 9.
Effect of immersion time on the (a) weight loss and (b) Ta ion release in simulated body fluid solution
Fig. 10.
Effect of Nb content of the alloy on (a) weight loss and (b) Ta ion release in simulated body fluid solution
Fig. 11.
Effect of Sn content of the alloy on the (a) weight loss and (b) Ta ion release in simulated body fluid solution
Fig. 12.
Effect of porosity content of the alloy on (a) weight loss and (b) Ta ion release
Fig. 13.
Photograph of the water droplet at the surface of the sample
Fig. 14.
(a) Digital radiography result of the sample and (b) computed tomography images of the sample
Mean size of carbamide particles and mean pores size of the sintered foams
Carbamide particle shape
Carbamide particle size ranges (
μ
m)
Mean carbamide particle size (
μ
m)
Mean pore size (
μ
m)
Irregular
–1400+1000
1270
850
Irregular
–1000+710
860
590
Irregular
–710+500
580
410
Spherical
–1400+1000
1300
880