This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Dong S, Chen X, La Plante EC, Gussev M, Leonard K, Sant G. Elucidating the grain-orientation dependent corrosion rates of austenitic stainless steels. Mater Des. 2020;191:108583. doi: 10.1016/j.matdes.2020.108583DongSChenXLa PlanteECGussevMLeonardKSantG.Elucidating the grain-orientation dependent corrosion rates of austenitic stainless steels..2020;191:108583. doi:10.1016/j.matdes.2020.108583Open DOISearch in Google Scholar
Chen Z, Bobaru F. Peridynamic modeling of pitting corrosion damage, J Mech Phys Solids. 2015;78:352–81. doi: 10.1016/j.jmps.2015.02.015ChenZBobaruF.Peridynamic modeling of pitting corrosion damage,.2015;78:352–81. doi:10.1016/j.jmps.2015.02.015Open DOISearch in Google Scholar
Niu PL, Li WY, Li N, Xu YX, Chen DL. Exfoliation corrosion of friction stir welded dissimilar 2024-to-7075 aluminum alloys. Mater Charact. 2019;147:93–100. doi: 10.1016/j.matchar.2018.11.002NiuPLLiWYLiNXuYXChenDL.Exfoliation corrosion of friction stir welded dissimilar 2024-to-7075 aluminum alloys..2019;147:93–100. doi:10.1016/j.matchar.2018.11.002Open DOISearch in Google Scholar
Ralston KD, Fabijanic D, Birbilis N. Effect of grain size on corrosion of high purity aluminum, Electrochim Acta. 2011;56 (4):1729–36. doi: 10.1016/j.electacta.2010.09.023RalstonKDFabijanicDBirbilisN.Effect of grain size on corrosion of high purity aluminum,.2011;56(4):1729–36. doi:10.1016/j.electacta.2010.09.023Open DOISearch in Google Scholar
Rifai M, Miyamoto H, Fujiwara H. Effects of strain energy and grain size on corrosion resistance of ultrafine grained Fe-20%Cr steels with extremely low C and N fabricated by ECAP. Int J Corros. 2015;2015:386865. doi: 10.1155/2015/386865RifaiMMiyamotoHFujiwaraH.Effects of strain energy and grain size on corrosion resistance of ultrafine grained Fe-20%Cr steels with extremely low C and N fabricated by ECAP..2015;2015:386865. doi:10.1155/2015/386865Open DOISearch in Google Scholar
Balusamy T, Kumar S, Sankara Narayanan TSN. Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel. Corros Sci. 2010;52(11):3826–34. doi: 10.1016/j.corsci.2010.07.004BalusamyTKumarSSankara NarayananTSN.Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel..2010;52(11):3826–34. doi:10.1016/j.corsci.2010.07.004Open DOISearch in Google Scholar
Pisarek M, Kêdzierzawski P, Janik-Czachor M, Kurzy-dłowski J. Effect of hydrostatic extrusion on the corrosion resistance of type 316 stainless steel. Corrosion. 2008;64(2):131–7. doi: 10.5006/1.3280681PisarekMKêdzierzawskiPJanik-CzachorMKurzy-dłowskiJ.Effect of hydrostatic extrusion on the corrosion resistance of type 316 stainless steel..2008;64(2):131–7. doi:10.5006/1.3280681Open DOISearch in Google Scholar
Song D, Ma A, Jiang J, Lin P, Yang D. Corrosion behavior of ultra-fine grained industrial pure Al fabricated by ECAP. Trans Nonferrous Met Soc China. 2009;19(5):1065–70. doi: 10.1016/S1003-6326(08)60407-0SongDMaAJiangJLinPYangD.Corrosion behavior of ultra-fine grained industrial pure Al fabricated by ECAP..2009;19(5):1065–70. doi:10.1016/S1003-6326(08)60407-0Open DOISearch in Google Scholar
Wang XY, Li DY. Mechanical and electrochemical behavior of nanocrystalline surface of 304 stainless steel. Electrochim Acta. 2002;47(24):3939–47. doi: 10.1016/S0013-4686(02)00365-1WangXYLiDY.Mechanical and electrochemical behavior of nanocrystalline surface of 304 stainless steel..2002;47(24):3939–47. doi:10.1016/S0013-4686(02)00365-1Open DOISearch in Google Scholar
Ralston KD, Birbilis N, Davies CHJ. Revealing the relationship between grain size and corrosion rate of metals, Scr Mater. 2010;63(12)1201–4. doi: 10.1016/j.scriptamat.2010.08.035RalstonKDBirbilisNDaviesCHJ.Revealing the relationship between grain size and corrosion rate of metals,.2010;63(12)1201–4. doi:10.1016/j.scriptamat.2010.08.035Open DOISearch in Google Scholar
Yan J, Heckman N, Velasco L, Hodge AM. Improve sensitization and corrosion resistance of an Al-Mg alloy by optimization of grain boundaries. Sci Rep. 2016;6:26870. doi: 10.1038/srep26870YanJHeckmanNVelascoLHodgeAM.Improve sensitization and corrosion resistance of an Al-Mg alloy by optimization of grain boundaries..2016;6:26870. doi:10.1038/srep26870Open DOISearch in Google Scholar
Tomaszow ND. Teoria korozji i ochrony metali. Warszawa: PWN—Polskie Wydawnictwo Muzyczne: 1982.TomaszowND..Warszawa:PWN—Polskie Wydawnictwo Muzyczne:1982.Search in Google Scholar
Białobrzeski A, Czekaj E, Heller M, Własściwosści korozyjne stopów aluminium i magnezu przetwarza nych technologią odlewania ciśnieniowego. Arch Foundry Eng. 2002;2(3):294–313.BiałobrzeskiACzekajEHellerM,Własściwosści korozyjne stopów aluminium i magnezu przetwarza nych technologią odlewania ciśnieniowego..2002;2(3):294–313.Search in Google Scholar
Akiyama E, Zhang Z, Watanabe Y, Tsuzaki K. Effects of severe plastic deformation on the corrosion behavior of aluminum alloys. J Solid State Electrochem. 2009;13: 277–82. doi: 10.1007/s10008-007-0496-9AkiyamaEZhangZWatanabeYTsuzakiK.Effects of severe plastic deformation on the corrosion behavior of aluminum alloys..2009;13:277–82. doi:10.1007/s10008-007-0496-9Open DOISearch in Google Scholar
Lachowicz MM. Elektrochemiczne i mikrostrukturalne aspekty rozwoju niszczenia korozyjnego czeęci maszyn i urządzeń. Monografia, Wydawnictwo Naukowe—Instytutu Technologii Eksploatacji Sieć Badawcza Lukasiewicz Radom, Poland. 2020. ISBN 978-83-7789-620-4LachowiczMM..Monografia, Wydawnictwo Naukowe—Instytutu Technologii Eksploatacji Sieć Badawcza Lukasiewicz Radom,Poland.2020.ISBN 978-83-7789-620-4Search in Google Scholar
Georgantzia E, Gkantou M, Kamaris GS. Aluminium alloys as structural material: a review of research. Eng Struct. 2021;.227:111372. doi: 10.1016/j.engstruct.2020.111372GeorgantziaEGkantouMKamarisGS.Aluminium alloys as structural material: a review of research..2021;.227:111372. doi:10.1016/j.engstruct.2020.111372Open DOISearch in Google Scholar
Lachowicz MM, Pêkalski G. Charakterystyka wytrzy-małościowa połączeń spawanych stopu AW 7020. Górnictwo Odkrywkowe. 2014;55(1):48–52.LachowiczMMPêkalskiG.Charakterystyka wytrzy-małościowa połączeń spawanych stopu AW 7020..2014;55(1):48–52.Search in Google Scholar
Zhou B, Liu B, Zhang S. The advancement of 7XXX series aluminum alloys for aircraft structures: a review. Metals. 2021;11:718. doi: 10.3390/met11050718ZhouBLiuBZhangS.The advancement of 7XXX series aluminum alloys for aircraft structures: a review..2021;11:718. doi:10.3390/met11050718Open DOISearch in Google Scholar
Hosford WF. Physical Metallurgy. Boca Raton: CRC Press; 2010.HosfordWF..Boca Raton:CRC Press;2010.Search in Google Scholar
Kairy SK, Turk S, Birbilis N, Shekhter A. The role of microstructure and microchemistry on intergranular corrosion of aluminium alloy AA7085-T7452. Corros Sci. 2018; 143:414–27. doi: 10.1016/j.corsci.2018.08. 033KairySKTurkSBirbilisNShekhterA.The role of microstructure and microchemistry on intergranular corrosion of aluminium alloy AA7085-T7452..2018;143:414–27. doi:10.1016/j.corsci.2018.08. 033Open DOISearch in Google Scholar
Fan X, Jiang D, Meng Q, Zhang B, Wang T. Evolution of eutectic structures in Al-Zn-Mg-Cu alloys during heat treatment. Trans Nonferrous Met Soc China. 2006;16(3):577–81. doi: 10.1016/S1003-6326(06)60101-5FanXJiangDMengQZhangBWangT.Evolution of eutectic structures in Al-Zn-Mg-Cu alloys during heat treatment..2006;16(3):577–81. doi:10.1016/S1003-6326(06)60101-5Open DOISearch in Google Scholar
Liu JZ, Chen JH, Liu ZR, Wu CL. Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part II: fine precipitation scenarios in AlZnMg(Cu) alloys Mater Charact. 2015;99:142–9. doi: 10.1016/j.matchar.2014.11.027LiuJZChenJHLiuZRWuCL.Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part II: fine precipitation scenarios in AlZnMg(Cu) alloys.2015;99:142–9. doi:10.1016/j.matchar.2014.11.027Open DOISearch in Google Scholar
Liu JZ, Chen JH, Yang XB, Ren S, Wu CL, Xu HY, Zou J. Revisiting the precipitation sequence in Al– Zn–Mg-based alloys by high-resolution transmission electron microscopy. Scr Mater. 2010;.63(11):1061–4. doi: 10.1016/j.scriptamat.2010.08.001LiuJZChenJHYangXBRenSWuCLXuHYZouJ.Revisiting the precipitation sequence in Al– Zn–Mg-based alloys by high-resolution transmission electron microscopy..2010;.63(11):1061–4. doi:10.1016/j.scriptamat.2010.08.001Open DOISearch in Google Scholar
Ogura T, Hirosawa S, Sato T. Quantitative characterization of precipitate free zones in Al–Zn–Mg(–Ag) alloys by microchemical analysis and nanoindentation measurement. Sci Technol Adv Mater. 2004;5(4):491–6. doi: 10.1016/j.stam.2004.02.007OguraTHirosawaSSatoT.Quantitative characterization of precipitate free zones in Al–Zn–Mg(–Ag) alloys by microchemical analysis and nanoindentation measurement..2004;5(4):491–6. doi:10.1016/j.stam.2004.02.007Open DOISearch in Google Scholar
Rometsch PA, Zhang Y, Knight S. Heat treatment of 7xxx series aluminium alloys—Some recent developments, Trans Nonferrous Met Soc China. 2014;24(7):2003–17. doi: 10.1016/S1003-6326(14)63306-9RometschPAZhangYKnightS.Heat treatment of 7xxx series aluminium alloys—Some recent developments,.2014;24(7):2003–17. doi:10.1016/S1003-6326(14)63306-9Open DOISearch in Google Scholar
Li J, Li F, Ma X, Li J., Liang S. Effect of grain boundary characteristic on intergranular corrosion and mechanical properties of severely sheared Al-Zn-Mg-Cu alloy. Mater Sci Eng: A. 2018;732:53–62. doi: 10.1016/j.msea.2018.06.097LiJLiFMaXLiJ.LiangS.Effect of grain boundary characteristic on intergranular corrosion and mechanical properties of severely sheared Al-Zn-Mg-Cu alloy..2018;732:53–62. doi:10.1016/j.msea.2018.06.097Open DOISearch in Google Scholar
Marlaud T, Deschamps A, Bley F, Lefebvre W, Baroux B. Influence of alloy composition and heat treatment on precipitate composition in Al—Zn—Mg—Cu alloys. Acta Mater. 2010;58(1):248–60. doi: 10.1016/j. actamat.2009.09.003MarlaudTDeschampsABleyFLefebvreWBarouxB.Influence of alloy composition and heat treatment on precipitate composition in Al—Zn—Mg—Cu alloys..2010;58(1):248–60. doi:10.1016/j. actamat.2009.09.003Open DOISearch in Google Scholar
Berg LK, Gjønnes J, Hansen V, Li XZ, Knutson-Wedel M, Waterloo G, et al. GP-zones in Al–Zn–Mg alloys and their role in artificial aging. Acta Mater. 2001;49(17):3443–51. doi: 10.1016/S1359-6454(01)00251-8BergLKGjønnesJHansenVLiXZKnutson-WedelMWaterlooG.GP-zones in Al–Zn–Mg alloys and their role in artificial aging..2001;49(17):3443–51. doi:10.1016/S1359-6454(01)00251-8Open DOISearch in Google Scholar
Kalemba I, Hamilton C, Dymek S. Natural aging in friction stir welded 7136-T76 aluminum alloy. Mater. Des. 2014;60:295–301.doi: 10.1016/j.matdes.2014.04.009KalembaIHamiltonCDymekS.Natural aging in friction stir welded 7136-T76 aluminum alloy..2014;60:295–301.doi:10.1016/j.matdes.2014.04.009Open DOISearch in Google Scholar
Li S, Dong H, Shi L, Li P, Ye F. Corrosion behavior and mechanical properties of Al-Zn-Mg aluminum alloy weld. Corros Sci. 2017;123:243–55. doi: 10.1016/j.corsci.2017.05.007LiSDongHShiLLiPYeF.Corrosion behavior and mechanical properties of Al-Zn-Mg aluminum alloy weld..2017;123:243–55. doi:10.1016/j.corsci.2017.05.007Open DOISearch in Google Scholar
Temmar M, Hadji M, Sahraoui T. Effect of postweld aging treatment on mechanical properties of tungsten inert gas welded low thickness 7075 aluminium alloy joints. Mater Des. 2011;.32(6):3532–6. doi: 10.1016/j.matdes.2011.02.011TemmarMHadjiMSahraouiT.Effect of postweld aging treatment on mechanical properties of tungsten inert gas welded low thickness 7075 aluminium alloy joints..2011;.32(6):3532–6. doi:10.1016/j.matdes.2011.02.011Open DOISearch in Google Scholar
Kumar S, Namboodhiri TKG. Precipitation hardening and hydrogen embrittlement of aluminum alloy AA7020. Bull Mater Sci. 2011;34(2):311–21. doi: 10.1007/s12034-011-0066-8KumarSNamboodhiriTKG.Precipitation hardening and hydrogen embrittlement of aluminum alloy AA7020..2011;34(2):311–21. doi:10.1007/s12034-011-0066-8Open DOISearch in Google Scholar
Ashby MF, Jones DRH. Engineering materials 2: an introduction to microstructure and processing. Oxford: Elsevier; 2013.AshbyMFJonesDRH..Oxford:Elsevier;2013.Search in Google Scholar
Ładak A, Cichoń M, Lachowicz MM. Evaluation of the effect of dual-stage aging and RRA on the hardening and corrosion resistance of AW7075 alloy. Corros Mater Degrad. 2022;3(1):142–59. doi: 10.3390/cmd3010008ŁadakACichońMLachowiczMM.Evaluation of the effect of dual-stage aging and RRA on the hardening and corrosion resistance of AW7075 alloy..2022;3(1):142–59. doi:10.3390/cmd3010008Open DOISearch in Google Scholar
Li JF, Zheng ZQ, Li S.C, Chen WJ, Ren WD, Zhao XS. Simulation study on function mechanism of some precipitates in localized corrosion of Al alloys. Corros Sci. 2007;49(6):2436–49. doi: 10.1016/j.corsci.2006.12.002LiJFZhengZQLiS.CChenWJRenWDZhaoXS.Simulation study on function mechanism of some precipitates in localized corrosion of Al alloys..2007;49(6):2436–49. doi:10.1016/j.corsci.2006.12.002Open DOISearch in Google Scholar
Wloka J, Hack T, Virtanen S. Influence of temper and surface condition on the exfoliation behaviour of high strength Al–Zn–Mg–Cu alloys. Corros Sci. 2007;49(3):1437-49. doi: 10.1016/j.corsci.2006.06.033WlokaJHackTVirtanenS.Influence of temper and surface condition on the exfoliation behaviour of high strength Al–Zn–Mg–Cu alloys..2007;49(3):1437-49. doi:10.1016/j.corsci.2006.06.033Open DOISearch in Google Scholar
Andreatta F, Terryn H, de Wit JHW. Effect of solution heat treatment on galvanic coupling between intermetallics and matrix in AA7075-T6. Corros Sci. 2003;45: 1733–46. doi: 10.1016/S0010-938X(03)00004-0AndreattaFTerrynHde WitJHW.Effect of solution heat treatment on galvanic coupling between intermetallics and matrix in AA7075-T6..2003;45:1733–46. doi:10.1016/S0010-938X(03)00004-0Open DOISearch in Google Scholar
Jha AK, Shiresha GN, Sreekumar K, Mittal MC, Ninan KN, Stress corrosion cracking in aluminium alloy AFNOR 7020-T6 water tank adaptor for liquid propulsion system. Eng Failure Anal. 2008;15(6):787–95. doi: 10.1016/j.engfailanal.2007.05.009JhaAKShireshaGNSreekumarKMittalMCNinanKN,Stress corrosion cracking in aluminium alloy AFNOR 7020-T6 water tank adaptor for liquid propulsion system..2008;15(6):787–95. doi:10.1016/j.engfailanal.2007.05.009Open DOISearch in Google Scholar
Yan S, Chen H, Ma C, Nie Y, Wang X, Qin QH. Local corrosion behaviour of hybrid laser-MIG welded Al– Zn–Mg alloy joints. Mater Des. 2015;88:1353–65. doi: 10.1016/j.matdes.2015.08.140YanSChenHMaCNieYWangXQinQH.Local corrosion behaviour of hybrid laser-MIG welded Al– Zn–Mg alloy joints..2015;88:1353–65. doi:10.1016/j.matdes.2015.08.140Open DOISearch in Google Scholar
Birbilis N, Buchheit RG. Electrochemical characteristics of intermetallic phases in aluminum alloys; an experimental survey and discussion. J Electrochem Soc. 2005;152(4):B140–51. doi: 10.1149/1.1869984BirbilisNBuchheitRG.Electrochemical characteristics of intermetallic phases in aluminum alloys; an experimental survey and discussion..2005;152(4):B140–51. doi:10.1149/1.1869984Open DOISearch in Google Scholar
Birbilis N, Buchheit RG. Investigation and discussion of characteristics for intermetallic phases common to aluminum alloys as a function of solution pH. J Electrochem Soc. 2008;155(3):C117–C126. doi: 10.1149/1.2829897BirbilisNBuchheitRG.Investigation and discussion of characteristics for intermetallic phases common to aluminum alloys as a function of solution pH..2008;155(3):C117–C126. doi:10.1149/1.2829897Open DOISearch in Google Scholar
Ogura T, Hirosawa S, Cerezo A, Sato T. Atom probe tomography of nanoscale microstructures within precipitate free zones in Al–Zn–Mg(–Ag) alloys. Acta Mater. 2010;58;5714–23. doi: 10.1016/j.actamat.2010. 06.046OguraTHirosawaSCerezoASatoT.Atom probe tomography of nanoscale microstructures within precipitate free zones in Al–Zn–Mg(–Ag) alloys..2010;58;5714–23. doi:10.1016/j.actamat.2010. 06.046Open DOISearch in Google Scholar
Su R, Qu Y, Li X, You J, Li R. Effect of retrogression and reaging on stress corrosion cracking of spray formed Al alloy. Mater Sci Appl. 2016;7:1–7. doi: 10.4236/msa.2016.71001SuRQuYLiXYouJLiR.Effect of retrogression and reaging on stress corrosion cracking of spray formed Al alloy..2016;7:1–7. doi:10.4236/msa.2016.71001Open DOISearch in Google Scholar
Chen S, Chen K, Peng G, Liang X, Chen X, Effect of quenching rate on microstructure and stress corrosion cracking of 7085 aluminum alloy. Trans Nonferrous Met Soc China. 2012;22(1):47–52. doi: 10.1016/S1003-6326(11)61138-2ChenSChenKPengGLiangXChenX,Effect of quenching rate on microstructure and stress corrosion cracking of 7085 aluminum alloy..2012;22(1):47–52. doi:10.1016/S1003-6326(11)61138-2Open DOISearch in Google Scholar
Yang XB, Chen JH, Zhang GH, Huang LP, Fan TW, Ding Y, Yu XW. A transmission electron microscopy study of microscopic causes for localized-corrosion morphology variations in the AA7055 Al alloy. J Mater Sci Technol. 2018;34(10):1719–29. doi: 10.1016/j.jmst.2018.05.006YangXBChenJHZhangGHHuangLPFanTWDingYYuXW.A transmission electron microscopy study of microscopic causes for localized-corrosion morphology variations in the AA7055 Al alloy..2018;34(10):1719–29. doi:10.1016/j.jmst.2018.05.006Open DOISearch in Google Scholar
Marlaud T, Malki B, Henon C, Deschamps A, Baroux B. Relationship between alloy composition, microstructure and exfoliation corrosion in Al–Zn– Mg–Cu alloys, Corros Sci. 2011;53(10):3139–49. doi: 10.1016/j.corsci.2011.05.057MarlaudTMalkiBHenonCDeschampsABarouxB.Relationship between alloy composition, microstructure and exfoliation corrosion in Al–Zn– Mg–Cu alloys,.2011;53(10):3139–49. doi:10.1016/j.corsci.2011.05.057Open DOISearch in Google Scholar
Umamaheshwer Rao AC, Vasu V, Govindaraju M, Sai Srinadh KV. Stress corrosion cracking behaviour of 7xxx aluminum alloys: a literature review. Trans Nonferrous Met Soc China. 2016;26(6):1447–71. doi: 10.1016/S1003-6326(16)64220-6Umamaheshwer RaoACVasuVGovindarajuMSai SrinadhKV.Stress corrosion cracking behaviour of 7xxx aluminum alloys: a literature review..2016;26(6):1447–71. doi:10.1016/S1003-6326(16)64220-6Open DOISearch in Google Scholar
McNaughtan D, Worsfold M, Robinson MJ. Corrosion product force measurements in the study of exfoliation nd stress corrosion cracking in high strength aluminium alloys. Corros Sci. 2003;45(1):2377–89. doi: 10.1016/S0010-938X(03)00050-7McNaughtanDWorsfoldMRobinsonMJ.Corrosion product force measurements in the study of exfoliation nd stress corrosion cracking in high strength aluminium alloys..2003;45(1):2377–89. doi:10.1016/S0010-938X(03)00050-7Open DOISearch in Google Scholar
Chen S, Chen K, Dong P, Ye S, Huang L. Effect of heat treatment on stress corrosion cracking, fracture toughness and strength of 7085 aluminum alloy. Trans Nonferrous Met Soc China. 2014;24(7):2320–5. doi: 10.1016/S1003-6326(14)63351-3ChenSChenKDongPYeSHuangL.Effect of heat treatment on stress corrosion cracking, fracture toughness and strength of 7085 aluminum alloy..2014;24(7):2320–5. doi:10.1016/S1003-6326(14)63351-3Open DOISearch in Google Scholar
Wang D, Ma ZY. Effect of pre-strain on microstructure and stress corrosion cracking of over-aged 7050 aluminum alloy. J Alloys Compd. 2009;469(1–2):445–50. doi: 10.1016/j.jallcom.2008.01.137WangDMaZY.Effect of pre-strain on microstructure and stress corrosion cracking of over-aged 7050 aluminum alloy..2009;469(1–2):445–50. doi:10.1016/j.jallcom.2008.01.137Open DOISearch in Google Scholar
Peng G, Chen K, Chen S, Fang H. Influence of repetitious-RRA treatment on the strength and SCC resistance of Al–Zn–Mg–Cu alloy. Mater Sci Eng: A. 2011;528(12):4014–8. doi: 10.1016/j.msea.2011.01.088PengGChenKChenSFangH.Influence of repetitious-RRA treatment on the strength and SCC resistance of Al–Zn–Mg–Cu alloy..2011;528(12):4014–8. doi:10.1016/j.msea.2011.01.088Open DOISearch in Google Scholar
Liu LL, Pan QL, Wang XD, Xiong SW. The effects of aging treatments on mechanical property and corrosion behavior of spray formed 7055 aluminium alloy. J Alloys Compd. 2018;735:261–76. doi: 10.1016/j.jallcom.2017.11.070LiuLLPanQLWangXDXiongSW.The effects of aging treatments on mechanical property and corrosion behavior of spray formed 7055 aluminium alloy..2018;735:261–76. doi:10.1016/j.jallcom.2017.11.070Open DOISearch in Google Scholar
Kumar A, Chaudhari GP, Nath SK. SCC susceptibility of RRA treated high-zinc 7068 aluminum alloy. Corros Sci. 2023;220:111257. doi: 10.1016/j.corsci.2023.111257KumarAChaudhariGPNathSK.SCC susceptibility of RRA treated high-zinc 7068 aluminum alloy..2023;220:111257. doi:10.1016/j.corsci.2023.111257Open DOISearch in Google Scholar
Vijaya Kumar P, Madhusudhan Reddy G, Srinivasa Rao K. Microstructure and pitting corrosion of armor grade AA7075 aluminum alloy friction stir weld nugget zone – Effect of post weld heat treatment and addition of boron carbide. Def Technol. 2015;11(2):166–73. doi: 10.1016/j.dt.2015.01.002Vijaya KumarPMadhusudhan ReddyGSrinivasa RaoK.Microstructure and pitting corrosion of armor grade AA7075 aluminum alloy friction stir weld nugget zone – Effect of post weld heat treatment and addition of boron carbide..2015;11(2):166–73. doi:10.1016/j.dt.2015.01.002Open DOISearch in Google Scholar
Li JF, Birbilis N, Li CX., Jia ZQ, Cai B, Zheng ZQ. Influence of retrogression temperature and time on the mechanical properties and exfoliation corrosion behavior of aluminium alloy AA7150. Mater Charact. 2009;60(11):1334–41. doi: 10.1016/j.matchar.2009.06.007LiJFBirbilisNLiCX.JiaZQCaiBZhengZQ.Influence of retrogression temperature and time on the mechanical properties and exfoliation corrosion behavior of aluminium alloy AA7150..2009;60(11):1334–41. doi:10.1016/j.matchar.2009.06.007Open DOISearch in Google Scholar
Ozer G, Karaaslan A. Properties of AA7075 aluminum alloy in aging and retrogression and reaging process. Trans Nonferrous Met Soc China. 2017;27(11):2357–62. doi: 10.1016/S1003-6326(17)60261-9OzerGKaraaslanA.Properties of AA7075 aluminum alloy in aging and retrogression and reaging process..2017;27(11):2357–62. doi:10.1016/S1003-6326(17)60261-9Open DOISearch in Google Scholar
Wang Y, Cao L, Wu X, Tong X, Liao B, Huang G, Wang Z. Effect of retrogression treatments on microstructure, hardness and corrosion behaviors of aluminum alloy 7085. J Alloys Compd. 2020;814:152264, doi: 10.1016/j.jallcom.2019.152264WangYCaoLWuXTongXLiaoBHuangGWangZ.Effect of retrogression treatments on microstructure, hardness and corrosion behaviors of aluminum alloy 7085..2020;814:152264, doi:10.1016/j.jallcom.2019.152264Open DOISearch in Google Scholar
Park JK, Ardell AJ. Effect of retrogression and reaging treatments on the microstructure of Al-7075-T651. Metall Mater Trans A. 1984;15(8):1531–43. doi: 10.1007/BF02657792ParkJKArdellAJ.Effect of retrogression and reaging treatments on the microstructure of Al-7075-T651..1984;15(8):1531–43. doi:10.1007/BF02657792Open DOISearch in Google Scholar
Guo F, Duan S, Wu D, Matsuda K, Wang T, Zou Y. Effect of retrogression re-aging treatment on corrosion behavior of 7055 Al-Zn-Mg alloy. Mater Res Express. 2020;7(10):106523. doi: 10.1088/2053-1591/abc191GuoFDuanSWuDMatsudaKWangTZouY.Effect of retrogression re-aging treatment on corrosion behavior of 7055 Al-Zn-Mg alloy..2020;7(10):106523. doi:10.1088/2053-1591/abc191Open DOISearch in Google Scholar
Krishnanunni S, Gupta RK, Ajithkumar G, Anil Kumar V, Ghosh R. Investigation on effect of optimized RRA in strength and SCC resistance for aluminium alloy AA7010. Mater Today: Proc. 2020;27(3):2385–9. doi: 10.1016/j.matpr.2019.09.136KrishnanunniSGuptaRKAjithkumarGAnil KumarVGhoshR.Investigation on effect of optimized RRA in strength and SCC resistance for aluminium alloy AA7010..2020;27(3):2385–9. doi:10.1016/j.matpr.2019.09.136Open DOISearch in Google Scholar
Lachowicz MM, Leśniewski T, Lachowicz MB. Effect of dual-stage ageing and RRA treatment on the three-body abrasive wear of the AW7075 alloy. Strojniški vestnik – J Mech Eng. 2022;68(7–8:493–505. doi: 10.5545/sv-jme.2022.142LachowiczMMLeśniewskiTLachowiczMB.Effect of dual-stage ageing and RRA treatment on the three-body abrasive wear of the AW7075 alloy. Strojniški vestnik –.2022;68(7–8:493–505. doi:10.5545/sv-jme.2022.142Open DOISearch in Google Scholar
Wang YL, Jiang HC, Li ZM, Yan DS, Zhang D, Rong LJ. Two-stage double peaks ageing and its effect on stress corrosion cracking susceptibility of Al-Zn-Mg alloy. J Mater Sci Technol. 2018;34(7):1250–7. doi: 10.1016/j.jmst.2017.05.008WangYLJiangHCLiZMYanDSZhangDRongLJ.Two-stage double peaks ageing and its effect on stress corrosion cracking susceptibility of Al-Zn-Mg alloy..2018;34(7):1250–7. doi:10.1016/j.jmst.2017.05.008Open DOISearch in Google Scholar
Emani SV, Benedyk J, Nash P, Chen D. Double aging and thermomechanical heat treatment of AA7075 aluminum alloy extrusions. J Mater Sci. 2009;44:6384–91. doi: 10.1007/s10853-009-3879-8EmaniSVBenedykJNashPChenD.Double aging and thermomechanical heat treatment of AA7075 aluminum alloy extrusions..2009;44:6384–91. doi:10.1007/s10853-009-3879-8Open DOISearch in Google Scholar
Bobby Kannan M, Bala Srinivasan P, Raja VS. Stress corrosion cracking (SCC) of aluminium alloys. In: Raja VS, Shoji T, editors. Woodhead publishing series in metals and surface engineering, stress corrosion cracking. Salt Lake City, Utah: Woodhead Publishing; 2011. p. 307–40. ISBN 9781845696733, doi: 10.1533/9780857093769.3.307Bobby KannanMBala SrinivasanPRajaVS.Stress corrosion cracking (SCC) of aluminium alloys. In:RajaVSShojiT, editors..Salt Lake City, Utah:Woodhead Publishing;2011. p.307–40.ISBN 9781845696733, doi:10.1533/9780857093769.3.307Open DOISearch in Google Scholar
Burleigh TD. The postulated mechanisms for stress corrosion cracking of aluminum alloys: a review of the literature 1980–1989. Corrosion. 1991;47(2):89–98. doi: 10.5006/1.3585235BurleighTD.The postulated mechanisms for stress corrosion cracking of aluminum alloys: a review of the literature 1980–1989..1991;47(2):89–98. doi:10.5006/1.3585235Open DOISearch in Google Scholar
Dymek S. Nowoczesne stopy aluminium do przeróbki plastycznej. Krakow: Wydawnictwo AGH; 2012.DymekS..Krakow:Wydawnictwo AGH;2012.Search in Google Scholar
Shreir LL. Corrosion, 2nd ed. Amsterdam: Newnes-Butterworth; 1976.ShreirLL.,2nd ed.Amsterdam:Newnes-Butterworth;1976.Search in Google Scholar
Eckermann F, Suter T, Uggowitzer PJ, Afseth A, Schmutz P. Investigation of the exfoliation-like attack mechanism in relation to Al–Mg–Si alloy microstructure. Corros Sci. 2008;50:2085–93. doi: 10.1016/j.corsci.2008.04.003EckermannFSuterTUggowitzerPJAfsethASchmutzP.Investigation of the exfoliation-like attack mechanism in relation to Al–Mg–Si alloy microstructure..2008;50:2085–93. doi:10.1016/j.corsci.2008.04.003Open DOISearch in Google Scholar
Mai W, Soghrati S, Buchheit RG. A phase field model for simulating the pitting corrosion. Corros Sci. 2016;110:157–66. doi: 10.1016/j.corsci.2016.04.001MaiWSoghratiSBuchheitRG.A phase field model for simulating the pitting corrosion..2016;110:157–66. doi:10.1016/j.corsci.2016.04.001Open DOISearch in Google Scholar
Lindell D, Pettersson R. Crystallographic effects in corrosion of austenitic stainless steel 316L. Mater Corros. 2015;66(8):727–32. doi: 10.1002/maco.201408002LindellDPetterssonR.Crystallographic effects in corrosion of austenitic stainless steel 316L..2015;66(8):727–32. doi:10.1002/maco.201408002Open DOISearch in Google Scholar
Shahryari A, Szpunar JA, Omanovic S, The influence of crystallographic orientation distribution on 316LVM stainless steel pitting behavior. Corros Sci. 2009;51(3):677–82. doi: 10.1016/j.corsci.2008.12.019ShahryariASzpunarJAOmanovicS,The influence of crystallographic orientation distribution on 316LVM stainless steel pitting behavior..2009;51(3):677–82. doi:10.1016/j.corsci.2008.12.019Open DOISearch in Google Scholar
de Sousa Araujo JA, Donatus U, Martins Queiroz F, Terada M, Milagre MX, de Alencar MC, Costa I On the severe localized corrosion susceptibility of the AA2198-T851 alloy. Corros Sci. 2018;133:132–40. doi: 10.1016/j.corsci.2018.01.028de Sousa AraujoJADonatusUMartins QueirozFTeradaMMilagreMXde AlencarMC,Costa I On the severe localized corrosion susceptibility of the AA2198-T851 alloy..2018;133:132–40. doi:10.1016/j.corsci.2018.01.028Open DOISearch in Google Scholar
Donatus U, Thompson GE, Omotoyinbo JA, Alaneme KK, Aribo S, Agbabiaka OG. Corrosion pathways in aluminum alloys. Trans Nonferrous Met Soc China. 2017;27(1):55–62. doi: 10.1016/S1003-6326(17)60006-2DonatusUThompsonGEOmotoyinboJAAlanemeKKAriboSAgbabiakaOG.Corrosion pathways in aluminum alloys..2017;27(1):55–62. doi:10.1016/S1003-6326(17)60006-2Open DOISearch in Google Scholar
Zhang X, Zhou X, Hashimoto T, Liu B. Localized corrosion in AA2024-T351 aluminium alloy: transition from intergranular corrosion to crystallographic pitting. Mater Charact. 2017;130:230–6. doi: 10.1016/j.matchar.2017.06.022ZhangXZhouXHashimotoTLiuB.Localized corrosion in AA2024-T351 aluminium alloy: transition from intergranular corrosion to crystallographic pitting..2017;130:230–6. doi:10.1016/j.matchar.2017.06.022Open DOISearch in Google Scholar
Treacy GM, Breslin CB. Electrochemical studies on single-crystal aluminium surfaces. Electrochim Acta. 1998;43(12–13):1715–20. doi: 10.1016/S0013-4686(97)00305-8TreacyGMBreslinCB.Electrochemical studies on single-crystal aluminium surfaces..1998;43(12–13):1715–20. doi:10.1016/S0013-4686(97)00305-8Open DOISearch in Google Scholar
Seo JH, Ryu JH, Lee DN. Formation of crystallographic etch pits during AC etching of aluminum. J Electrochem. Soc. 2003;150(9):B433–8. doi: 10.1149/1.1596952SeoJHRyuJHLeeDN.Formation of crystallographic etch pits during AC etching of aluminum..2003;150(9):B433–8. doi:10.1149/1.1596952Open DOISearch in Google Scholar
Jin H, Sui Y, Yu X, Feng J, Jiang Y, Wang Q, Sun W. The crystallographic orientation dependent anisotropic corrosion behavior of aluminum in 3.5 wt% NaCl solution. J Electroanalyt Chem. 2023;946:117746. doi: 10.1016/j.jelechem.2023.117746JinHSuiYYuXFengJJiangYWangQSunW.The crystallographic orientation dependent anisotropic corrosion behavior of aluminum in 3.5 wt% NaCl solution..2023;946:117746. doi:10.1016/j.jelechem.2023.117746Open DOISearch in Google Scholar
Schöchlin J, Bohnen KP, Ho KM. Structure and dynamics at the Al(111)-surface. Surf Sci. 1995; 324:113–21. doi: 10.1016/0039-6028(94)00710-1SchöchlinJBohnenKPHoKM.Structure and dynamics at the Al(111)-surface..1995; 324:113–21. doi:10.1016/0039-6028(94)00710-1Open DOISearch in Google Scholar
Koroleva EV, Thompson GE, Skeldon P, Noble B. Crystallographic dissolution of high purity aluminum. Pro R Soc. 2007;463:1729–48. doi: 10.1098/rspa.2007.1846KorolevaEVThompsonGESkeldonPNobleB.Crystallographic dissolution of high purity aluminum..2007;463:1729–48. doi:10.1098/rspa.2007.1846Open DOISearch in Google Scholar
Ghali E. General, galvanic, and localized corrosion of aluminum and its alloys. Ch. 5 in: Corrosion resistance of aluminum and magnesium alloys. RW Revie, E. Ghali, editors. Hoboken, NJ: John Wiley, 2010. doi: 10.1002/9780470531778.ch5GhaliE.General, galvanic, and localized corrosion of aluminum and its alloys.Ch. 5 in:.RevieRWGhaliE., editors.Hoboken, NJ:John Wiley,2010. doi:10.1002/9780470531778.ch5Open DOISearch in Google Scholar
Ma Y, Zhou X, Huang W, Thompson GE, Zhang X, Luo C, Sun Z. Localized corrosion in AA2099-T83 aluminum–lithium alloy: the role of intermetallic particles. Mater Chem Phys. 2015:161:201. doi: 10.1098/rspa.2007.1846210. doi: 10.1016/j.matchemphys.2015.05.037MaYZhouXHuangWThompsonGEZhangXLuoCSunZ.Localized corrosion in AA2099-T83 aluminum–lithium alloy: the role of intermetallic particles..2015:161:201. doi:10.1098/rspa.2007.1846210.doi: 10.1016/j.matchemphys.2015.05.037Open DOISearch in Google Scholar
Huang J, Feng S, Li S, Wu C, Chen J. The crystallographic corrosion and its microstructure in an Al-Cu-Li alloy. J Alloys Compd. 2021;861:158588. doi: 10.1016/j.jallcom.2020.158588HuangJFengSLiSWuCChenJ.The crystallographic corrosion and its microstructure in an Al-Cu-Li alloy..2021;861:158588. doi:10.1016/j.jallcom.2020.158588Open DOISearch in Google Scholar
Donatus U, Terada M, Ospina CR, Martins Queiroz F, Santos Bugarin AF, Costa I. On the AA2198-T851 alloy microstructure and its correlation with localized corrosion behaviour. Corros Sci. 2018;131:300–9. doi: 10.1016/j.corsci.2017.12.001DonatusUTeradaMOspinaCRMartins QueirozFSantos BugarinAFCostaI.On the AA2198-T851 alloy microstructure and its correlation with localized corrosion behaviour..2018;131:300–9. doi:10.1016/j.corsci.2017.12.001Open DOISearch in Google Scholar
Zhang X, Zhou X, Hashimoto T, Liu B, Luo C, Sun Z, et al. Corrosion behaviour of 2A97-T6 Al-Cu-Li alloy: the influence of non-uniform precipitation. Corros Sci. 2018;132:1–8. doi: 10.1016/j.corsci.2017.12. 010ZhangXZhouXHashimotoTLiuBLuoCSunZ.Corrosion behaviour of 2A97-T6 Al-Cu-Li alloy: the influence of non-uniform precipitation..2018;132:1–8. doi:10.1016/j.corsci.2017.12. 010Open DOISearch in Google Scholar
Wang SS, Huang IW, Yang L, Jiang JT, Chen JF, Dai SL, et al. Effect of Cu content and aging conditions on pitting corrosion damage of 7xxx series aluminum alloys. J Electrochem Soc. 2015;162(4):C150. doi: 10.1149/2.0301504jesWangSSHuangIWYangLJiangJTChenJFDaiSL.Effect of Cu content and aging conditions on pitting corrosion damage of 7xxx series aluminum alloys..2015;162(4):C150. doi:10.1149/2.0301504jesOpen DOISearch in Google Scholar
Wang SS, Frankel G, Jiang JT, Chen JF, Dai SL, Zhen L. Mechanism of localized breakdown of 7000 series aluminum alloys, J Electrochem Soc. 2013;160(10):C493. doi: 10.1149/2.080310jesWangSSFrankelGJiangJTChenJFDaiSLZhenL.Mechanism of localized breakdown of 7000 series aluminum alloys,.2013;160(10):C493. doi:10.1149/2.080310jesOpen DOISearch in Google Scholar
Sha G, Cerezo A. Early-stage precipitation in Al–Zn– Mg–Cu alloy (7050). Acta Mater 2004;52(15):4503–16. doi: 10.1016/j.actamat.2004.06.025ShaGCerezoA.Early-stage precipitation in Al–Zn– Mg–Cu alloy (7050).2004;52(15):4503–16. doi:10.1016/j.actamat.2004.06.025Open DOISearch in Google Scholar
Ji S, Yang W, Gao F, Watson D, Fan Z. Effect of iron on the microstructure and mechanical property of Al–Mg– Si–Mn and Al–Mg–Si diecast alloys. Mater Sci Eng: A. 2013;564:130–9. doi: 10.1016/j.msea.2012.11.095JiSYangWGaoFWatsonDFanZ.Effect of iron on the microstructure and mechanical property of Al–Mg– Si–Mn and Al–Mg–Si diecast alloys..2013;564:130–9. doi:10.1016/j.msea.2012.11.095Open DOISearch in Google Scholar
Warmuzek M. Analysis of the chemical composition of AlMnFe and AlFeMnSi intermetallic phases in the interdendritic eutectics in the Al-alloys. Prace Instytutu Odlewnictwa. 2014;R.LIV(1):7–16. doi: 10.7356/iod.2014.01WarmuzekM.Analysis of the chemical composition of AlMnFe and AlFeMnSi intermetallic phases in the interdendritic eutectics in the Al-alloys..2014;R.LIV(1):7–16. doi:10.7356/iod.2014.01Open DOISearch in Google Scholar
Taylor JA. Iron-containing intermetallic phases in Al-Si based casting alloys. Proc Mater Sci. 2012;1:19–33. doi: 10.1016/j.mspro.2012.06.004TaylorJA.Iron-containing intermetallic phases in Al-Si based casting alloys..2012;1:19–33. doi:10.1016/j.mspro.2012.06.004Open DOISearch in Google Scholar
Cao X, Campbell J. The nucleation of Fe-Rich phases on oxide films in Al-11.5Si-0.4Mg cast alloys. Metallurg Mater Trans A. 2003;34:1409–20. doi: 10.1007/s11661-003-0253-3CaoXCampbellJ.The nucleation of Fe-Rich phases on oxide films in Al-11.5Si-0.4Mg cast alloys..2003;34:1409–20. doi:10.1007/s11661-003-0253-3Open DOISearch in Google Scholar
Belov NA, Aksenov AA, Eskin DG. Iron in aluminum alloys: impurity and alloying element. In: Friodlyander JN, Eskin DG, editors. Advances in metallic alloys. Book series, pod red.London: Taylor & Francis; 2002.BelovNAAksenovAAEskinDG.Iron in aluminum alloys: impurity and alloying element. In:FriodlyanderJNEskinDG, editors..London:Taylor & Francis;2002.Search in Google Scholar
Bahadur A. Intermetallic phases in Al-Mn alloys. J Mater Sci. 1998;23:48–54. doi: 10.1007/BF01174033BahadurA.Intermetallic phases in Al-Mn alloys..1998;23:48–54. doi:10.1007/BF01174033Open DOISearch in Google Scholar
Mrówka-Nowotnik G, Sieniawski J, Nowotnik A. Intermetallic phase identification on the cast and heat treated 6082 aluminum alloy. Arch Metall Mater. 2006;51(4):599–603.Mrówka-NowotnikGSieniawskiJNowotnikA.Intermetallic phase identification on the cast and heat treated 6082 aluminum alloy..2006;51(4):599–603.Search in Google Scholar
Podprocka R, Bolibruchova D. Iron intermetallic phases in the alloy based on Al-Si-Mg by applying manganese. Arch Foundry Eng. 2017;17(3):217–21. doi: 10.1515/afe-2017-0118PodprockaRBolibruchovaD.Iron intermetallic phases in the alloy based on Al-Si-Mg by applying manganese..2017;17(3):217–21. doi:10.1515/afe-2017-0118Open DOISearch in Google Scholar
Warmuzek M. The AlFeMnSi intermetallics competition in the interdendritic eutectics in AlSi cast alloys influenced by cooling rate and transition metals content. Prace Instytutu Odlewnictwa. 2016;R.LVI(1):7–16. doi: 10.7356/iod.2016.02WarmuzekM.The AlFeMnSi intermetallics competition in the interdendritic eutectics in AlSi cast alloys influenced by cooling rate and transition metals content..2016;R.LVI(1):7–16. doi:10.7356/iod.2016.02Open DOISearch in Google Scholar
Irizalp SG, Saklakoglu N. Effect of Fe-rich inter-metallics on the microstructure and mechanical properties of thixoformed A380 aluminum alloy. Eng Sci Technol Int J. 2014:17(2):58–62. doi: 10.1016/j.jestch.2014.03.006IrizalpSGSaklakogluN.Effect of Fe-rich inter-metallics on the microstructure and mechanical properties of thixoformed A380 aluminum alloy..2014:17(2):58–62. doi:10.1016/j.jestch.2014.03.006Open DOISearch in Google Scholar
Belmares-Perales S, Zaldívar-Cadena AA. Addition of iron for the removal of the β-AlFeSi intermetallic by refining of α-AlFeSi phase in an Al–7.5Si–3.6Cu alloy. Mater Sci Eng B. 2010;174(1–3):191–5. doi: 10.1016/j.mseb.2010.03.032Belmares-PeralesSZaldívar-CadenaAA.Addition of iron for the removal of the β-AlFeSi intermetallic by refining of α-AlFeSi phase in an Al–7.5Si–3.6Cu alloy..2010;174(1–3):191–5. doi:10.1016/j.mseb.2010.03.032Open DOISearch in Google Scholar
Kuijpers NCW, Vermolen FJ, Vuik C, Koenis PTG, Nilsen KE, van der Zwaag S. The dependence of the β-AlFeSi to α-Al(FeMn)Si transformation kinetics in Al–Mg–Si alloys on the alloying elements. Mater Sci Eng A. 2005;394(1–2):9–19. doi: 10.1016/j.msea.2004.09.073KuijpersNCWVermolenFJVuikCKoenisPTGNilsenKEvan der ZwaagS.The dependence of the β-AlFeSi toα-Al(FeMn)Si transformation kinetics in Al–Mg–Si alloys on the alloying elements..2005;394(1–2):9–19. doi:10.1016/j.msea.2004.09.073Open DOISearch in Google Scholar
Sarafoglou PI. Serafeim A, Fanikos IA, Aristeidakis JS, Haidemenopoulos GN. Modeling of microsegregation and homogenization of 6xxx Al-alloys including precipitation and strengthening during homogenization cooling. Materials (Basel). 2019;12(9)1421. doi: 10.3390/ma12091421SarafoglouPI.SerafeimAFanikosIAAristeidakisJSHaidemenopoulosGN.Modeling of microsegregation and homogenization of 6xxx Al-alloys including precipitation and strengthening during homogenization cooling..2019;12(9)1421. doi:10.3390/ma12091421Open DOISearch in Google Scholar
Liu Y, Huang G, Sun Y, Zhang L, Huang Z, Wang J, Liu C. Effect of Mn and Fe on the formation of Fe-and Mn-Rich intermetallics in Al-5Mg-Mn alloys solidified under near-rapid cooling. Materials (Basel). 2016;9:88. doi: 10.3390/ma9020088LiuYHuangGSunYZhangLHuangZWangJLiuC.Effect of Mn and Fe on the formation of Fe-and Mn-Rich intermetallics in Al-5Mg-Mn alloys solidified under near-rapid cooling..2016;9:88. doi:10.3390/ma9020088Open DOISearch in Google Scholar
Zolotorevsky VS, Belov NA, Glazoff MA. Casting aluminium alloys. Amsterdam: Elsevier; 2007.ZolotorevskyVSBelovNAGlazoffMA..Amsterdam:Elsevier;2007.Search in Google Scholar
Nakayasu H, Kobayashi E, Sato T, Holmestad R, Marthinsen K. Orientation relationships of phase transformation in α-Al12Mn3Si pseudomorphs after plate-like Al6Mn precipitate in an AA3004 Al-Mn based alloy. Mater Charact. 2018;136:367–74. doi: 10.1016/j.matchar.2017.12.006NakayasuHKobayashiESatoTHolmestadRMarthinsenK.Orientation relationships of phase transformation in α-Al12Mn3Si pseudomorphs after plate-like Al6Mn precipitate in an AA3004 Al-Mn based alloy..2018;136:367–74. doi:10.1016/j.matchar.2017.12.006Open DOISearch in Google Scholar
Orozco-Gonzalez P, Castro-Roman M, Lopez-Rueda J, Hernandez-Rodriguez A, Muniz-Valdez R, Luna-Alvarez S, Ortiz-Cuellar C. Effect of iron addition on the crystal structure of the α-AlFeMnSi phase formed in the quaternary Al-Fe-Mn-Si system. Rev Metal Madrid. 2011;47(6):453–61. doi: 10.3989/revmetalm.1068Orozco-GonzalezPCastro-RomanMLopez-RuedaJHernandez-RodriguezAMuniz-ValdezRLuna-AlvarezSOrtiz-CuellarC.Effect of iron addition on the crystal structure of the α-AlFeMnSi phase formed in the quaternary Al-Fe-Mn-Si system..2011;47(6):453–61. doi:10.3989/revmetalm.1068Open DOISearch in Google Scholar
Lachowicz MM, Lachowicz MB, Gertruda A. Role of microstructure in corrosion of microchannel heat exchangers. In¿ynieria Materiałowa. 2018;lR.39(*3):94–8. doi: 10.15199/28.2018.3.1LachowiczMMLachowiczMBGertrudaA.Role of microstructure in corrosion of microchannel heat exchangers..2018;lR.39(*3):94–8. doi:10.15199/28.2018.3.1Open DOISearch in Google Scholar
Fratila-Apachitei LE, Apachitei I, Duszczyk J. Characterization of cast AlSi(Cu) alloys by scanning Kelvin probe force microscopy. Electrochim Acta. 2006;51(26):5892–6. doi: 10.1016/j.electacta.2006.03.027Fratila-ApachiteiLEApachiteiIDuszczykJ.Characterization of cast AlSi(Cu) alloys by scanning Kelvin probe force microscopy..2006;51(26):5892–6. doi:10.1016/j.electacta.2006.03.027Open DOISearch in Google Scholar
Linardi E, Haddad R, Lanzani L. Stability analysis of the Mg2Si phase in AA 6061 aluminum alloy. Proc Mater Sci. 2012;1:550–7. doi: 10.1016/j.mspro.2012.06.074LinardiEHaddadRLanzaniL.Stability analysis of the Mg2Si phase in AA 6061 aluminum alloy..2012;1:550–7. doi:10.1016/j.mspro.2012.06.074Open DOISearch in Google Scholar
Luo C, Albu SP, Zhou X, Sun Z, Zhang X, Tang Z, Thompson GE. Continuous and discontinuous localized corrosion of a 2xxx aluminium–copper–lithium alloy in sodium chloride solution. J Alloys Compd. 2016;658:61–70. doi: 10.1016/j.jallcom.2015.10.185LuoCAlbuSPZhouXSunZZhangXTangZThompsonGE.Continuous and discontinuous localized corrosion of a 2xxx aluminium–copper–lithium alloy in sodium chloride solution..2016;658:61–70. doi:10.1016/j.jallcom.2015.10.185Open DOISearch in Google Scholar
Dursun T, Soutis C. Recent developments in advanced aircraft aluminium alloys. Mater Des. (1980–2015). 2014;56:862–71. doi: 10.1016/j.matdes.2013.12.002DursunTSoutisC.Recent developments in advanced aircraft aluminium alloys..2014;56:862–71. doi:10.1016/j.matdes.2013.12.002Open DOISearch in Google Scholar
Podrez-Radziszewska M. Weldability problems of the technical AW7020 alloy. Manuf Technol. 2011;11(11):59–66.Podrez-RadziszewskaM.Weldability problems of the technical AW7020 alloy..2011;11(11):59–66.Search in Google Scholar
Zhang K, Chen JQ, Ma PZ, Zhang XH. Effect of welding thermal cycle on microstructural evolution of Al–Zn–Mg–Cu alloy. Mater Sci Eng A. 2018;717:85–94. doi: 10.1016/j.msea.2018.01.067ZhangKChenJQMaPZZhangXH.Effect of welding thermal cycle on microstructural evolution of Al–Zn–Mg–Cu alloy.A.2018;717:85–94. doi:10.1016/j.msea.2018.01.067Open DOISearch in Google Scholar
Ma T, den Ouden G. Softening behaviour of Al–Zn–Mg alloys due to welding. Mater Sci Eng: A. 1999;.266(1–2):198–204. doi: 10.1016/S0921-5093(99)00020-9MaTden OudenG.Softening behaviour of Al–Zn–Mg alloys due to welding..1999;.266(1–2):198–204. doi:10.1016/S0921-5093(99)00020-9Open DOISearch in Google Scholar
Holzer M, Hofmann K, Mann V, Hugger F, Roth S, Schmidt M. Change of hot cracking susceptibility in welding of high strength aluminum alloy AA 7075. Phys Proc. 2016;83:463–71. doi: 10.1016/j.phpro.2016.08.048HolzerMHofmannKMannVHuggerFRothSSchmidtM.Change of hot cracking susceptibility in welding of high strength aluminum alloy AA 7075..2016;83:463–71. doi:10.1016/j.phpro.2016.08.048Open DOISearch in Google Scholar
Kuźnicka B, Podrez-Radziszewska M. Correlation between microstructural evolution in heat affected zone and corrosion behaviour of Al-Cu alloy. Arch Metall Mater. 2008;53(3):933–8.KuźnickaBPodrez-RadziszewskaM.Correlation between microstructural evolution in heat affected zone and corrosion behaviour of Al-Cu alloy..2008;53(3):933–8.Search in Google Scholar
Podrez-Radziszewska M, Kuźnicka B, Chęcmanowski J. Wpływ zmian mikrostruktury w strefie wpływu ciepła na zachowanie korozyjne stopu aluminium z miedzią. Inżynieria Mater. 2008;R.29(6):1032–5.Podrez-RadziszewskaMKuźnickaBChęcmanowskiJ.Wpływ zmian mikrostruktury w strefie wpływu ciepła na zachowanie korozyjne stopu aluminium z miedzią..2008;R.29(6):1032–5.Search in Google Scholar
Lachowicz MM. Odporność korozyjna złaczyspawanych stopu aluminium AW 7020. Przegląd Spawalnictwa, 2012;.R.84(8):58–63. doi:10.26628/wtr.v84i8.371LachowiczMM.Odporność korozyjna złaczyspawanych stopu aluminium AW 7020.,2012;.R.84(8):58–63. doi:10.26628/wtr.v84i8.371Open DOISearch in Google Scholar
Bocchi S, Cabrini M, D’Urso G, Giardini C, Lorenzi S, Pastore T. The influence of process parameters on mechanical properties and corrosion behavior of friction stir welded aluminum joints. J Manuf Process. 2018;35:1–15. doi: 10.1016/j.jmapro.2018.07.012BocchiSCabriniMD’UrsoGGiardiniCLorenziSPastoreT.The influence of process parameters on mechanical properties and corrosion behavior of friction stir welded aluminum joints..2018;35:1–15. doi:10.1016/j.jmapro.2018.07.012Open DOISearch in Google Scholar
Dudzik K, Charchalis A. Właściwości strefy spływu w złączu zgrzewanym metodą FSW stopu AW-7020. Logistyka. 2014(6):3304–11.DudzikKCharchalisA.Właściwości strefy spływu w złączu zgrzewanym metodą FSW stopu AW-7020..2014(6):3304–11.Search in Google Scholar
Shah PH, Badheka V. Effect of various welding parameters on corrosion behavior of friction-stir-welded AA 7075-T651 alloys. MM A. 2018;7:308–20. doi: 10.1007/s13632-018-0440-7ShahPHBadhekaV.Effect of various welding parameters on corrosion behavior of friction-stir-welded AA 7075-T651 alloys..2018;7:308–20. doi:10.1007/s13632-018-0440-7Open DOISearch in Google Scholar
Podrez-Radziszewska M, Lachowicz MB, Dudziński W. Spawanie siluminów stosowanych na tarcze kół samochodowych. Przegląd Spawalnictwa. 2007;R.79(8):54–7.Podrez-RadziszewskaMLachowiczMBDudzińskiW.Spawanie siluminów stosowanych na tarcze kół samochodowych..2007;R.79(8):54–7.Search in Google Scholar
Tasak E. Metalurgia spawania. Kraków: Wydawnictwo JAK; 2008.TasakE..Kraków:Wydawnictwo JAK;2008.Search in Google Scholar
Yang ZM, Yan HG, Chen JH, Su B, Zhang GH, Zhao Q. Microstructural characterisation and liquation behaviour of laser welded joint of fine grained AZ91 magnesium alloy thin sheets. Sci Technol Weld. Join. 2015;20(1):27–34. doi: 10.1179/1362171814Y.0000000252YangZMYanHGChenJHSuBZhangGHZhaoQ.Microstructural characterisation and liquation behaviour of laser welded joint of fine grained AZ91 magnesium alloy thin sheets..2015;20(1):27–34. doi:10.1179/1362171814Y.0000000252Open DOISearch in Google Scholar
Oya Y, Kojima Y, Hara N. Influence of silicon on intergranular corrosion for aluminum alloys. Mater Trans. 2013;54(7):1200–8. doi: 10.2320/mater-trans.M2013048OyaYKojimaYHaraN.Influence of silicon on intergranular corrosion for aluminum alloys..2013;54(7):1200–8. doi:10.2320/mater-trans.M2013048Open DOISearch in Google Scholar
Jha AK, Murty SVS\N, Diwakar V, Sree Kumar K. Metallurgical analysis of cracking in weldment of propellant tank. Eng Fail Anal. 2003;10(*3):265–73. doi: 10.1016/S1350-6307(02)00073-0JhaAKMurtySVS\NDiwakarVSree KumarK.Metallurgical analysis of cracking in weldment of propellant tank..2003;10(*3):265–73. doi:10.1016/S1350-6307(02)00073-0Open DOISearch in Google Scholar
Jha AK, Shiresha GN, Sreekumar K, Mittal MC, Ninan KN. Stress corrosion cracking in alumnium alloy AFNOR 7020-T6 water tank adaptor for liquid propulsion system. Eng Fail Anal. 2008;15(6):787–795. doi: 10.1016/j.engfailanal.2007.05.009JhaAKShireshaGNSreekumarKMittalMCNinanKN.Stress corrosion cracking in alumnium alloy AFNOR 7020-T6 water tank adaptor for liquid propulsion system..2008;15(6):787–795. doi:10.1016/j.engfailanal.2007.05.009Open DOISearch in Google Scholar
Hill JA, Markley T, Forsyth M, Howlett PC, Hinton BRW. Corrosion inhibition of 7000 series aluminium alloys with cerium diphenyl phosphate. J Alloys Compd. 2011;509(5):1683–90. doi: 10.1016/j.jallcom.2010.09.151HillJAMarkleyTForsythMHowlettPCHintonBRW.Corrosion inhibition of 7000 series aluminium alloys with cerium diphenyl phosphate..2011;509(5):1683–90. doi:10.1016/j.jallcom.2010.09.151Open DOISearch in Google Scholar
Kim M, Brewer LN, Kubacki GW. Microstructure and corrosion resistance of chromate conversion coating on cold sprayed aluminum alloy 2024. Surf Coat Technol. 2023;460:129423, doi: 10.1016/j.surfcoat.2023.129423KimMBrewerLNKubackiGW.Microstructure and corrosion resistance of chromate conversion coating on cold sprayed aluminum alloy 2024..2023;460:129423, doi:10.1016/j.surfcoat.2023.129423Open DOISearch in Google Scholar
Ma IAW, Ammar S, Kumar SSA, Ramesh K, Ramesh S. A concise review on corrosion inhibitors: types, mechanisms and electrochemical evaluation studies. J Coat Technol Res. 2022;19:241–268. doi: 10.1007/s11998-021-00547-0MaIAWAmmarSKumarSSARameshKRameshS.A concise review on corrosion inhibitors: types, mechanisms and electrochemical evaluation studies..2022;19:241–268. doi:10.1007/s11998-021-00547-0Open DOISearch in Google Scholar
Xhanari K, Finšgar M. Organic corrosion inhibitors for aluminum and its alloys in chloride and alkaline solutions: a review. Arab J Chem. 2019;12(8):4646–63. doi: 10.1016/j.arabjc.2016.08.009XhanariKFinšgarM.Organic corrosion inhibitors for aluminum and its alloys in chloride and alkaline solutions: a review..2019;12(8):4646–63. doi:10.1016/j.arabjc.2016.08.009Open DOISearch in Google Scholar
Hosseinpour A, Abadchi MR, Mirzaee M, Tabar FA, Ramezanzadeh B. Recent advances and future perspectives for carbon nanostructures reinforced organic coating for anti-corrosion application. Surf Interfaces. 2021;23:100994. doi: 10.1016/j.surfin.2021.100994HosseinpourAAbadchiMRMirzaeeMTabarFARamezanzadehB.Recent advances and future perspectives for carbon nanostructures reinforced organic coating for anti-corrosion application..2021;23:100994. doi:10.1016/j.surfin.2021.100994Open DOISearch in Google Scholar
Khun NW, Rincon Troconis BC, Frankel GS. Effects of carbon nanotube content on adhesion strength and wear and corrosion resistance of epoxy composite coatings on AA2024-T3. Prog Org Coat. 2014;77(1):72–80. doi: 10.1016/j.porgcoat.2013.08.003KhunNWRincon TroconisBCFrankelGS.Effects of carbon nanotube content on adhesion strength and wear and corrosion resistance of epoxy composite coatings on AA2024-T3..2014;77(1):72–80. doi:10.1016/j.porgcoat.2013.08.003Open DOISearch in Google Scholar
Figueira RB, Silva CJR, Pereira EV. Organic–inorganic hybrid sol–gel coatings for metal corrosion protection: a review of recent progress. J Coat Technol Res. 2015;12:1–35. doi: 10.1007/s11998-014-9595-6FigueiraRBSilvaCJRPereiraEV.Organic–inorganic hybrid sol–gel coatings for metal corrosion protection: a review of recent progress..2015;12:1–35. doi:10.1007/s11998-014-9595-6Open DOISearch in Google Scholar
Feng Z, Liu Y, Thompson GE, Skeldon P. Sol–gel coatings for corrosion protection of 1050 aluminium alloy. Electrochim Acta. 2010;55(10);3518–27. doi: 10.1016/j.electacta.2010.01.074FengZLiuYThompsonGESkeldonP.Sol–gel coatings for corrosion protection of 1050 aluminium alloy..2010;55(10);3518–27. doi:10.1016/j.electacta.2010.01.074Open DOISearch in Google Scholar
Lachowicz MM, Winnicki M. Corrosion damage mechanisms of TiO2 cold-sprayed coatings. Arch Metall Mater., 2022;67(3):975–985. doi: 10.24425/amm.2022.139691LachowiczMMWinnickiM.Corrosion damage mechanisms of TiO2 cold-sprayed coatings..,2022;67(3):975–985. doi:10.24425/amm.2022.139691Open DOISearch in Google Scholar
Kim M, Brewer LN, Kubacki GW. Initiation and propagation of localized corrosion on cold-sprayed aluminum alloy 2024 and 7075. Corrosion. 2023;79(5):554–69. doi: 10.5006/4239KimMBrewerLNKubackiGW.Initiation and propagation of localized corrosion on cold-sprayed aluminum alloy 2024 and 7075..2023;79(5):554–69. doi:10.5006/4239Open DOISearch in Google Scholar
Runge JM, Hossain T. Interfacial phenomena in 7000 series alloys and their impact on the anodic oxide. Mater Today Proc Part A. 2015;2(10):5055–62. doi: 10.1016/j.matpr.2015.10.096RungeJMHossainT.Interfacial phenomena in 7000 series alloys and their impact on the anodic oxide..2015;2(10):5055–62. doi:10.1016/j.matpr.2015.10.096Open DOISearch in Google Scholar
Huang H, Niu J, Xing X, Lin Q, Chen H, Qiao Y. Effects of the shot peening process on corrosion resistance of aluminum alloy: a review. Coatings. 2022;12(5):629. doi: 10.3390/coatings12050629HuangHNiuJXingXLinQChenHQiaoY.Effects of the shot peening process on corrosion resistance of aluminum alloy: a review..2022;12(5):629. doi:10.3390/coatings12050629Open DOISearch in Google Scholar
Jiang J, Ma A, Song D, Yang D, Shi J, Wang K, Zhang L, Chen J. Anticorrosion behavior of ultrafine-grained Al-26 wt% Si alloy fabricated by ECAP. J Mater Sci. 2012;47:7744–50. doi: 10.1007/s10853-012-6703-9JiangJMaASongDYangDShiJWangKZhangLChenJ.Anticorrosion behavior of ultrafine-grained Al-26 wt% Si alloy fabricated by ECAP..2012;47:7744–50. doi:10.1007/s10853-012-6703-9Open DOISearch in Google Scholar
Brunner JG, Birbilis N, Ralston KD, Virtanen S. Impact of ultrafine-grained microstructure on the corrosion of aluminium alloy AA2024, Corros Sci. 2012;57:209–14. doi: 10.1016/j.corsci.2011.12.016BrunnerJGBirbilisNRalstonKDVirtanenS.Impact of ultrafine-grained microstructure on the corrosion of aluminium alloy AA2024,.2012;57:209–14. doi:10.1016/j.corsci.2011.12.016Open DOISearch in Google Scholar
Beura VK, Sharma A, Karanth Y, Sharma S, Solanki K. Corrosion behavior of 7050 and 7075 aluminum alloys processed by reactive additive manufacturing. Electrochim Acta. 2023;470:143357. doi: 10.1016/j.electacta.2023.143357BeuraVKSharmaAKaranthYSharmaSSolankiK.Corrosion behavior of 7050 and 7075 aluminum alloys processed by reactive additive manufacturing..2023;470:143357. doi:10.1016/j.electacta.2023.143357Open DOISearch in Google Scholar