<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This work studied the surface, interface state and physicochemical properties of HNO3-treated and KOH-treated carbon fiber. Poly(methyl methacrylate) (PMMA) composites were prepared by the autoclave molding process using surface-treated carbon fiber as reinforcements. The physical and chemical states of the carbon fiber surfaces and the micro-interface properties and interlaminar shear properties of the composites were studied. The results show that the surface of the HNO3-treated carbon fiber has more groove structure and higher surface roughness and thus forms a better physical bond with the resin matrix. Although the oxygen-containing functional groups of the two carbon fibers are equivalent, the surface oxygen of the HNO3-treated carbon fiber is relatively high, which is beneficial to form a better chemical bond with the matrix resin, and the interfacial shear strength is about 14% higher than that of the KOH-treated carbon fiber composite.</p>
</abstract>

This work studied the surface, interface state and physicochemical properties of HNO3-treated and KOH-treated carbon fiber. Poly(methyl methacrylate) (PMMA) composites were prepared by the autoclave molding process using surface-treated carbon fiber as reinforcements. The physical and chemical states of the carbon fiber surfaces and the micro-interface properties and interlaminar shear properties of the composites were studied. The results show that the surface of the HNO3-treated carbon fiber has more groove structure and higher surface roughness and thus forms a better physical bond with the resin matrix. Although the oxygen-containing functional groups of the two carbon fibers are equivalent, the surface oxygen of the HNO3-treated carbon fiber is relatively high, which is beneficial to form a better chemical bond with the matrix resin, and the interfacial shear strength is about 14% higher than that of the KOH-treated carbon fiber composite.

Effect of carbon fiber surface treatment with HNO3 and KOH on the interfacial bonding of PMMA resin composite

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This work studied the surface, interface state and physicochemical properties of HNO3-treated and KOH-treated carbon fiber. Poly(methyl methacrylate) (PMMA)...

Effect of carbon fiber surface treatment with HNO3 and KOH on the interfacial bonding of PMMA resin composite

Data publikacji: 06 paź 2023

Zakres stron: 301 - 310

Otrzymano: 21 kwi 2023

Przyjęty: 01 wrz 2023

DOI: https://doi.org/10.2478/msp-2023-0022

Słowa kluczowe
Carbon fiber, PMMA, Surface treatment, Interfacial shear strength, chemical bond

© 2023 Li Jian, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Effect of carbon fiber surface treatment with HNO3 and KOH on the interfacial bonding of PMMA resin composite

Data publikacji: 06 paź 2023

Zakres stron: 301 - 310

Otrzymano: 21 kwi 2023

Przyjęty: 01 wrz 2023

DOI: https://doi.org/10.2478/msp-2023-0022

Słowa kluczoweCarbon fiber, PMMA, Surface treatment, Interfacial shear strength, chemical bond

© 2023 Li Jian, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
Carbon fiber, PMMA, Surface treatment, Interfacial shear strength, chemical bond