Comparison of the performance properties of commercially produced roller cone bit coatings

[1] Franca LF. Drilling action of roller-cone bits: modeling and experimental validation. J Energy Resour Technol. 2010;132(4): 043101. doi:10.1115/1.4003168. Franca LF . Drilling action of roller-cone bits: modeling and experimental validation . J Energy Resour Technol . 2010 ; 132 ( 4 ): 043101 . doi: 10.1115/1.4003168 . Open DOISearch in Google Scholar

[2] Glinik Drilling Tools Catalog 2021. https://glinik.com.pl/wp-content/uploads/2021/08/Catalog-2021_-vl_EN_compressed-2.pdf. [Accessed 3rd April 2023]. Glinik Drilling Tools Catalog 2021 . https://glinik.com.pl/wp-content/uploads/2021/08/Catalog-2021_-vl_EN_compressed-2.pdf . [ Accessed 3rd April 2023 ]. Search in Google Scholar

[3] Šporin J, Mrvar P, Janc B, Vukelić Ž. Expression of the self-sharpening mechanism of a roller cone bit during wear due to the influence of the erosion protection carbide coating. Coat. 2021;11(11): 1308. doi:10.3390/coatings11111308. Šporin J Mrvar P Janc B Vukelić Ž. Expression of the self-sharpening mechanism of a roller cone bit during wear due to the influence of the erosion protection carbide coating . Coat . 2021 ; 11 ( 11 ): 1308 . doi: 10.3390/coatings11111308 . Open DOISearch in Google Scholar

[4] Sumrunpis N. Types of drilling bits. Weblog. https://petgeo.weebly.com/types-of-drilling-bits.html [Accessed 7th April 2023]. Sumrunpis N . Types of drilling bits . Weblog. https://petgeo.weebly.com/types-of-drilling-bits.html [ Accessed 7th April 2023 ]. Search in Google Scholar

[5] Abbas RK. A review on the wear of oil drill bits (conventional and the state of the art approaches for wear reduction and quantification). Eng Fail Anal. 2018;90: 554–584. doi:10.1016/j.engfailanal.2018.03.026. Abbas RK . A review on the wear of oil drill bits (conventional and the state of the art approaches for wear reduction and quantification) . Eng Fail Anal . 2018 ; 90 : 554 – 584 . DOI: 10.1016/j.engfailanal.2018.03.026 . Open DOISearch in Google Scholar

[6] Abbas RK, Ghanbarzadeh A, Hassanpour A. A novel method for estimating the real-time dullness of tricone oil drill bits. Eng Fail Anal. 2020;109:104386. doi:10.1016/j.engfailanal.2020.104386. Abbas RK Ghanbarzadeh A Hassanpour A . A novel method for estimating the real-time dullness of tricone oil drill bits . Eng Fail Anal . 2020 ; 109 : 104386 . doi: 10.1016/j.engfailanal.2020.104386 . Open DOISearch in Google Scholar

[7] Šporin J, Mrvar P, Petrić M, Vižintin G, Vukelić Ž. The characterization of wear in roller cone drill bit by rock material – sandstone. J Pet Sci Eng. 2019;173: 1355–1367. doi:10.1016/j.petrol.2018.10.090. Šporin J Mrvar P Petrić M Vižintin G Vukelić Ž. The characterization of wear in roller cone drill bit by rock material – sandstone . J Pet Sci Eng . 2019 ; 173 : 1355 – 1367 . DOI: 10.1016/j.petrol.2018.10.090 . Open DOISearch in Google Scholar

[8] Bu CG. Radial clearance is key factor affecting roller bearing life prediction in tricone bit. Adv Mater Res. 2008;44: 233–238. doi:10.4028/www.scientific.net/amr.44-46.233. Bu CG . Radial clearance is key factor affecting roller bearing life prediction in tricone bit . Adv Mater Res . 2008 ; 44 : 233 – 238 . DOI: 10.4028/www.scientific.net/amr.44-46.233 . Open DOISearch in Google Scholar

[9] Prakash S, Mukhopadhyay AK. Reliability analysis of tricone roller bits with tungsten carbide insert in blasthole drilling. Int J Min Reclam Environ. 2018;34(2): 101–118. doi:10.1080/17480930.2018.1530055. Prakash S Mukhopadhyay AK . Reliability analysis of tricone roller bits with tungsten carbide insert in blasthole drilling . Int J Min Reclam Environ . 2018 ; 34 ( 2 ): 101 – 118 . DOI: 10.1080/17480930.2018.1530055 . Open DOISearch in Google Scholar

[10] Larsen-Basse J. Wear of hard-metals in rock drilling: a survey of the literature. Pow Metal. 1973;16(31): 1–32. 10.1179/pom.1973.16.31.001. Larsen-Basse J . Wear of hard-metals in rock drilling: a survey of the literature . Pow Metal . 1973 ; 16 ( 31 ): 1 – 32 . 10.1179/pom.1973.16.31.001 . Open DOISearch in Google Scholar

[11] Šporin J, Balaško T, Mrvar P, Janc B, Vukelić Ž. Change of the properties of steel material of the roller cone bit due to the influence of the drilling operational parameters and rock properties. Energies. 2020;13(22): 5949. doi:10.3390/en13225949. Šporin J Balaško T Mrvar P Janc B Vukelić Ž. Change of the properties of steel material of the roller cone bit due to the influence of the drilling operational parameters and rock properties . Energies . 2020 ; 13 ( 22 ): 5949 . doi: 10.3390/en13225949 . Open DOISearch in Google Scholar

[12] Xiao Q, Sun WL, Yang KX, Xing XF, Chen ZH, Zhou HN. Wear mechanisms and micro-evaluation on WC particles investigation of WC-FE composite coatings fabricated by laser cladding. Surf Coat Technol. 2021;420: 127341. doi:10.1016/j.surfcoat.2021.127341. Xiao Q Sun WL Yang KX Xing XF Chen ZH Zhou HN . Wear mechanisms and micro-evaluation on WC particles investigation of WC-FE composite coatings fabricated by laser cladding . Surf Coat Technol . 2021 ; 420 : 127341 . doi: 10.1016/j.surfcoat.2021.127341 . Open DOISearch in Google Scholar

[13] Fang Z, Griffo A, White B, Belnap D, Hamilton R, Portwood G, Cox P, Hilmas G, Bitler J. Chipping resistant polycrystalline diamond and carbide composite materials for roller cone bits. In: SPE Annual Technical Conference and Exhibition. 2001. doi:10.2118/71394-MS. Fang Z Griffo A White B Belnap D Hamilton R Portwood G Cox P Hilmas G Bitler J . Chipping resistant polycrystalline diamond and carbide composite materials for roller cone bits . In: SPE Annual Technical Conference and Exhibition . 2001 . doi: 10.2118/71394-MS . Open DOISearch in Google Scholar

[14] Ndlovu S, Durst K, Göken M. Investigation of the sliding contact properties of WC-Co hard metals using nanoscratch testing. Wear. 2007;263(7-12): 1602–1609. DOI: 10.1016/j.wear.2006.11.044. Ndlovu S Durst K Göken M. Investigation of the sliding contact properties of WC-Co hard metals using nanoscratch testing . Wear . 2007 ; 263 ( 7-12 ): 1602 – 1609 . DOI: 10.1016/j.wear.2006.11.044 . Open DOISearch in Google Scholar

[15] Beste U, Jacobson S. A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons Wear. 2008;264(11-12): 1129–1141. doi:10.1016/j.wear.2007.01.030. Beste U Jacobson S . A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons Wear . 2008 ; 264 ( 11-12 ): 1129 – 1141 . DOI: 10.1016/j.wear.2007.01.030 . Open DOISearch in Google Scholar

[16] Badisch E, Kirchgaßner M. Influence of welding parameters on microstructure and wear behaviour of a typical NICRBSI hardfacing alloy reinforced with tungsten carbide. Surf Coat Technol. 2008;202(24); 6016–6022. doi:10.1016/j.surfcoat.2008.06.185. Badisch E Kirchgaßner M. Influence of welding parameters on microstructure and wear behaviour of a typical NICRBSI hardfacing alloy reinforced with tungsten carbide . Surf Coat Technol . 2008 ; 202 ( 24 ); 6016 – 6022 . DOI: 10.1016/j.surfcoat.2008.06.185 . Open DOISearch in Google Scholar

[17] Katiyar PK, Singh PK, Singh R, Kumar A. Modes of failure of cemented tungsten carbide tool bits (WC/CO): A study of wear parts. Int J Refract Metals Hard Meterials. 2016;54: 27–38. doi:10.1016/j.ijrmhm.2015.06.018. Katiyar PK Singh PK Singh R Kumar A . Modes of failure of cemented tungsten carbide tool bits (WC/CO): A study of wear parts . Int J Refract Metals Hard Meterials . 2016 ; 54 : 27 – 38 . DOI: 10.1016/j.ijrmhm.2015.06.018 . Open DOISearch in Google Scholar

[18] Liu W, Gao D. Microstructure and wear of Ni-WC Hardfacing used for steel-body PDC bits. Int J Refract Metals Hard Meterials. 2021;101: 105683. doi:10.1016/j.ijrmhm.2021.105683. Liu W Gao D . Microstructure and wear of Ni-WC Hardfacing used for steel-body PDC bits . Int J Refract Metals Hard Meterials . 2021 ; 101 : 105683 . doi: 10.1016/j.ijrmhm.2021.105683 . Open DOISearch in Google Scholar

[19] Garcia-Ayala EM, Tarancon S, Gonzalez Z, Ferrari B, Pastor JY, Sanchez-Herencia AJ. Processing of WC/W composites for extreme environments by colloidal dispersion of powders and SPS sintering. Int J Refract Metals Hard Meterials. 2019;84: 105026. doi:10.1016/j.ijrmhm.2019.105026. Garcia-Ayala EM Tarancon S Gonzalez Z Ferrari B Pastor JY Sanchez-Herencia AJ . Processing of WC/W composites for extreme environments by colloidal dispersion of powders and SPS sintering . Int J Refract Metals Hard Meterials . 2019 ; 84 : 105026 . doi: 10.1016/j.ijrmhm.2019.105026 . Open DOISearch in Google Scholar

[20] Maroli B, Dizdar S. Effect of type and amount of tungsten carbides on the abrasive wear of laser cladded nickel based coatings. ITSCE. 2015: 11-14. doi:10.31399/asm.cp.itsc2015p0345. Maroli B Dizdar S . Effect of type and amount of tungsten carbides on the abrasive wear of laser cladded nickel based coatings . ITSCE . 2015 : 11 - 14 . DOI: 10.31399/asm.cp.itsc2015p0345 . Open DOISearch in Google Scholar

[21] Czupryński A. Microstructure and abrasive wear resistance of metal matrix composite coatings deposited on steel grade AISI 4715 by Powder Plasma transferred arc welding part 2. Mechanical and structural properties of a nickel-based alloy surface layer reinforced with particles of tungsten carbide and synthetic metal–diamond composite, Materials. 2021;14(11): 2805. doi:10.3390/ma14112805. Czupryński A. Microstructure and abrasive wear resistance of metal matrix composite coatings deposited on steel grade AISI 4715 by Powder Plasma transferred arc welding part 2. Mechanical and structural properties of a nickel-based alloy surface layer reinforced with particles of tungsten carbide and synthetic metal–diamond composite , Materials . 2021 ; 14 ( 11 ): 2805 . doi: 10.3390/ma14112805 . Open DOISearch in Google Scholar

[22] Huang Z, Li G. Failure analysis of roller cone bit bearing based on mechanics and microstructure. J Fail Anal Prev. 2018;18: 342–349. doi:10.1007/s11668-018-0419-3. Huang Z Li G . Failure analysis of roller cone bit bearing based on mechanics and microstructure . J Fail Anal Prev . 2018 ; 18 : 342 – 349 . DOI: 10.1007/s11668-018-0419-3 . Open DOISearch in Google Scholar

[23] Li Q, Lei TC, Chen WZ. Microstructural characterization of WCP reinforced Ni–Cr–B–Si–C composite coatings. Surf Coat Technol. 1999;114(2-3):285–291. doi:10.1016/s0257-8972(99)00056-0. Li Q Lei TC Chen WZ . Microstructural characterization of WCP reinforced Ni–Cr–B–Si–C composite coatings . Surf Coat Technol . 1999 ; 114 ( 2-3 ): 285 – 291 . doi: 10.1016/s0257-8972(99)00056-0 . Open DOISearch in Google Scholar

[24] Zhong M, Liu W, Yao K, Goussain JC, Mayer C, Becker A. Microstructural evolution in high power laser cladding of stellite 6+WC layers. Surf CoatTechnol. 2002; doi:10.1016/s0257-8972(02)00165-2. Zhong M Liu W Yao K Goussain JC Mayer C Becker A . Microstructural evolution in high power laser cladding of stellite 6+WC layers . Surf CoatTechnol . 2002 ; doi: 10.1016/s0257-8972(02)00165-2 . Open DOISearch in Google Scholar

[25] Zhong M, Liu W. Microstructure evolution of Stellite 6+WC by high power laser cladding. Acta Metal Sin. 202;38: 495–500. doi:10.1016/S0257-8972(02)00165-2. Zhong M Liu W . Microstructure evolution of Stellite 6+WC by high power laser cladding . Acta Metal Sin . 202; 38 : 495 – 500 . DOI: 10.1016/S0257-8972(02)00165-2 . Open DOISearch in Google Scholar

[26] Liyanage T, Fisher G, Gerlich AP. Microstructures and abrasive wear performance of PTAW deposited ni– WC overlays using different Ni-alloy chemistries. Wear. 2012;274: 345–354. doi:10.1016/j.wear.2011.10.001. Liyanage T Fisher G Gerlich AP . Microstructures and abrasive wear performance of PTAW deposited ni– WC overlays using different Ni-alloy chemistries . Wear . 2012 ; 274 : 345 – 354 . DOI: 10.1016/j.wear.2011.10.001 . Open DOISearch in Google Scholar

[27] Gassmann RC. Laser cladding with (WC+W2C)/co– CR–C and (WC+W2C)/Ni–B–Si composites for enhanced abrasive wear resistance. Mater Sci Technol. 1996;12(8): 691–696. doi:10.1179/mst.1996.12.8.691. Gassmann RC . Laser cladding with (WC+W2C)/co– CR–C and (WC+W2C)/Ni–B–Si composites for enhanced abrasive wear resistance . Mater Sci Technol . 1996 ; 12 ( 8 ): 691 – 696 . DOI: 10.1179/mst.1996.12.8.691 . Open DOISearch in Google Scholar

[28] Sue A, Sreshta H, Qiu BH. Improved hardfacing for drill bits and drilling tools. J Therm Spray Technol. 2011;20: 372–377. doi:10.1007/s11666-010-9569-x. Sue A Sreshta H Qiu BH . Improved hardfacing for drill bits and drilling tools . J Therm Spray Technol . 2011 ; 20 : 372 – 377 . DOI: 10.1007/s11666-010-9569-x . Open DOISearch in Google Scholar

[29] Marques PV, da Trevisan R. ARC fusion of self-fluxed nickel alloys. J Braz Soc Mech Sci. 2000;22: 379–387. doi:10.1590/s0100-73862000000300001. Marques PV da Trevisan R . ARC fusion of self-fluxed nickel alloys . J Braz Soc Mech Sci . 2000 ; 22 : 379 – 387 . DOI: 10.1590/s0100-73862000000300001 . Open DOISearch in Google Scholar

[30] Grigorescu I. Phase characterization in ni alloy-hard carbide composites for fused coatings. Surf Coat Technol. 1995;76: 494–498. doi:10.1016/02578-9729(50)25111- Grigorescu I . Phase characterization in ni alloy-hard carbide composites for fused coatings . Surf Coat Technol . 1995 ; 76 : 494 – 498 . DOI: 10.1016/02578-9729(50)25111- Open DOISearch in Google Scholar

[31] Hamar-Thibau S, Valignat N, Lebaili S. In Int. Congr. X-ray Optics and Microanalysis, Manchester, 1992, Inst. Phys. Conf. Ser. No. 130,2: 189–192. Hamar-Thibau S Valignat N Lebaili S . In Int. Congr. X-ray Optics and Microanalysis, Manchester , 1992 , Inst. Phys. Conf. Ser. No . 130 , 2 : 189 – 192 . Search in Google Scholar

[32] Yang L, Yu T, Li M, Zhao Y, Sun J. Microstructure and wear resistance of in-situ synthesized ti(c, N) ceramic reinforced Fe-based coating by laser cladding. Ceram Int. 2018;18: 22538–22548. doi:10.1016/j.ceramint.2018.09.025. Yang L Yu T Li M Zhao Y Sun J . Microstructure and wear resistance of in-situ synthesized ti(c, N) ceramic reinforced Fe-based coating by laser cladding . Ceram Int . 2018 ; 18 : 22538 – 22548 . DOI: 10.1016/j.ceramint.2018.09.025 . Open DOISearch in Google Scholar

[33] Fernández MR, García A, Cuetos JM, González R, Noriega A, Cadenas M. Effect of actual WC content on the reciprocating wear of a laser cladding NiCrBSi alloy reinforced with WC. Wear. 2015l;324, 80–89. doi:10.1016/j.wear.2014.12.021. Fernández MR García A Cuetos JM González R Noriega A Cadenas M . Effect of actual WC content on the reciprocating wear of a laser cladding NiCrBSi alloy reinforced with WC . Wear . 2015l; 324 , 80 – 89 . DOI: 10.1016/j.wear.2014.12.021 . Open DOISearch in Google Scholar

[34] Tehrani HM, Shoja-Razavi R, Erfanmanesh M, Hashemi SH, Barakat M. Evaluation of the mechanical properties of WC-Ni composite coating on an AISI 321 steel substrate. Opt Laser Technol. 2020;127: 106138. doi:10.1016/j.optlastec.2020.106138. Tehrani HM Shoja-Razavi R Erfanmanesh M Hashemi SH Barakat M . Evaluation of the mechanical properties of WC-Ni composite coating on an AISI 321 steel substrate . Opt Laser Technol . 2020 ; 127 : 106138 . doi: 10.1016/j.optlastec.2020.106138 . Open DOISearch in Google Scholar