<abstract xmlns="http://www.w3.org/1999/xhtml">A novel and low-cost synthesis of tungsten disulfide (WS2) transition metal dichalcogenide was carried out via gas-solid reaction in a horizontal quartz reactor. In this process, the prepared hollow WO3 precursor was sulfided with CS2 at 550 °C at different durations under N2 gas atmosphere. The as-prepared WS2 samples were formed by substitution of O by S during the sulfidation process. The characterization of these samples was performed employing X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), Brunauer-Emmett-Teller (BET) specific surface area, X-ray photoelectron spectroscopy (XPS) and UV-Vis absorption spectroscopy. The characterization results showed that the as-prepared WS2 samples were of high quality and purity. No significant differences were observed in various WS2 samples synthesized during different sulfidation periods. The calculated results obtained from the density functional theory (DFT) indicate that WS2 has an indirect band gap of ca. 1.56 eV, which is in agreement with experimental band gap of ca. 1.50 eV. Combining the experimental and DFT results suggests that the novel method used in the synthesis of WS2 has a potential application for large scale production. The obtained WS2 are of high quality and can be implemented in photocatalysis, catalysis, photovoltaics, optoelectronic devices and photosensor devices.</abstract>

A novel and low-cost synthesis of tungsten disulfide (WS2) transition metal dichalcogenide was carried out via gas-solid reaction in a horizontal quartz reactor. In this process, the prepared hollow WO3 precursor was sulfided with CS2 at 550 °C at different durations under N2 gas atmosphere. The as-prepared WS2 samples were formed by substitution of O by S during the sulfidation process. The characterization of these samples was performed employing X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), Brunauer-Emmett-Teller (BET) specific surface area, X-ray photoelectron spectroscopy (XPS) and UV-Vis absorption spectroscopy. The characterization results showed that the as-prepared WS2 samples were of high quality and purity. No significant differences were observed in various WS2 samples synthesized during different sulfidation periods. The calculated results obtained from the density functional theory (DFT) indicate that WS2 has an indirect band gap of ca. 1.56 eV, which is in agreement with experimental band gap of ca. 1.50 eV. Combining the experimental and DFT results suggests that the novel method used in the synthesis of WS2 has a potential application for large scale production. The obtained WS2 are of high quality and can be implemented in photocatalysis, catalysis, photovoltaics, optoelectronic devices and photosensor devices.

Synthesis and density-functional-theory calculations of electronic band structure of hollow sphere WS2

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Synthesis and density-functional-theory calculations of electronic band structure of hollow sphere WS

A novel and low-cost synthesis of tungsten disulfide (WS2) transition metal dichalcogenide was carried out via gas-solid reaction in a horizontal quartz...

Synthesis and density-functional-theory calculations of electronic band structure of hollow sphere WS₂

Data publikacji: 02 lis 2018

Zakres stron: 409 - 418

Otrzymano: 17 maj 2017

Przyjęty: 15 mar 2018

DOI: https://doi.org/10.2478/msp-2018-0052

Słowa kluczowe
transition metal dichalcogenide, WS, DFT

© 2018 Maxwell Selase Akple et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Synthesis and density-functional-theory calculations of electronic band structure of hollow sphere WS2

Data publikacji: 02 lis 2018

Zakres stron: 409 - 418

Otrzymano: 17 maj 2017

Przyjęty: 15 mar 2018

DOI: https://doi.org/10.2478/msp-2018-0052

Słowa kluczowetransition metal dichalcogenide, WS, DFT

© 2018 Maxwell Selase Akple et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Synthesis and density-functional-theory calculations of electronic band structure of hollow sphere WS₂

Słowa kluczowe
transition metal dichalcogenide, WS, DFT